OE-style protective trim with a chrome accent designed for the right/front fender area of Peugeot 3008 I and 5008 I. This part restores the original look and offers a direct-fit replacement when the factory trim is scratched, faded or mechanically damaged. Supplied in Onyx Black (paint code EXY) with chrome detail, it matches original exterior trims and is often searched by its OE part numbers (96842432XT, 96842432XY, 9025T0), which makes finding the correct item quick for workshops and DIY enthusiasts.

Technical Information

• Manufacturer: Stellantis (Citroën / Peugeot)
• Model: Peugeot 3008 I, Peugeot 5008 I (first generation)
• Product Codes: 96842432XT, 96842432XY, 9025T0
• Other Numbers: 9025.T0
• Color: EXY – Onyx Black
• Fitment Location: Passenger side, protective trim above right fender / near right door mirror

Installation Recommendations

Installation is straightforward for experienced technicians and competent DIYers. Typical steps:

• Use plastic trim removal tools to carefully release the old trim to avoid damaging surrounding paint and clips.
• Inspect and, if necessary, replace any broken clips or fasteners—damaged clips are the most common cause of poor fitment.
• Clean the mounting surface of dirt, grease and adhesive residues before fitting the new piece to ensure a tight seat.
• Align the trim and press evenly until all clips engage. Where screws or additional fasteners exist, secure them to factory torque specifications.
• After installation, check panel gaps and adjust if required to maintain factory appearance.

Why This Part Fails Most Often

• Impact Damage: Scrapes and collisions with curbs or other objects commonly crack or detach the trim.
• Broken Clips: Repeated removal or cold weather can make plastic clips brittle and prone to breaking.
• UV And Weathering: Prolonged sun exposure can fade paint and chrome accents, reducing aesthetic quality.
• Poor Previous Repairs: Incorrectly fitted replacements or reused damaged fasteners lead to premature failure or rattles.

This trim is a direct-fit OEM-style replacement that helps return the vehicle to its original appearance while protecting the fender edge. Because customers commonly search by OE numbers, check the listed product codes (96842432XT / 96842432XY / 9025T0) when ordering to ensure a quick match for Peugeot 3008 I and 5008 I applications.

OEM-style protective trim designed for the area in front of the left exterior mirror on Peugeot 3008 I and 5008 I. The chrome-accented strip in Onyx Black (EXY) restores the vehicle’s original appearance after impact or wear, providing an exact visual match and clean finish. Frequently searched by part numbers 96842433XY, 96842433XT and 9025T2, this trim is ideal for professional workshops and DIY mechanics who want a direct-fit replacement that maintains factory aesthetics.

Benefits

• Factory Fit: Designed to match the original panel lines and mounting points.
• Correct Finish: Chrome accent combined with Onyx Black EXY color for authentic appearance.
• Quick Replacement: Simple clip- and screw-type attachment allows fast repair in the bodyshop or garage.
• Improves Visual Integrity: Replaces scuffed or broken trim to prevent moisture ingress and further body damage.

Fitment

Intended For: Peugeot 3008 I, Peugeot 5008 I. Driver Side (left).

Installation Recommendations

• Perform work on a clean, level surface and protect painted areas with masking tape to avoid scratches.
• Use plastic trim tools to pry clips gently; metal tools can damage paint or the new trim.
• Inspect and replace any broken clips or retainers — brittle clips are a common cause of poor fitment after removal.
• Clean mating surfaces and remove old adhesive residues before fitting to ensure secure seating.
• Tighten any retaining screws to manufacturer torque where applicable and check alignment before final pressing of clips into place.

Most Common Failure Reasons

• Impact Damage: Kerb strikes, shopping trolleys, or door impacts commonly crack or deform the trim.
• Clip Degradation: UV exposure and age make plastic clips brittle, causing the trim to loosen or rattle.
• Surface Wear: Stone chips, abrasions and weathering dull the chrome accent and paint finish over time.
• Improper Previous Removal: Damage from levered removal with metal tools can break mounting points.

Technical Information

• Manufacturer: Peugeot / Stellantis
• Model: Peugeot 3008 I, Peugeot 5008 I
• Product Codes: 96842433XY, 96842433XT, 9025T2
• Other Numbers: 9025.T2, T84, T87

Suitable for professional bodyshops and experienced DIY enthusiasts. Replace damaged clips and check surrounding panels for secondary damage when fitting. Using correct trim tools and following the steps above will ensure a neat, durable repair.

Product Description

High-quality exterior mirror trim designed for the left-hand side of Peugeot 3008 I and Peugeot 5008 I. This painted cover (Color EXY – Black Onyx) restores the original appearance after damage or wear and ensures a factory look thanks to its chrome-accented profile. Ideal for professional workshops and DIY enthusiasts who require a direct-fit replacement matching OE styling and finish.

Keywords: Left Mirror Cover, Mirror Cap, Peugeot 3008 Mirror Cover, Peugeot 5008 Mirror Cap, Black Onyx, Part Number 96859483XT, 96859485XY, 9025Z0.

Technical Information

• Manufacturer: Stellantis / Peugeot Citroën
• Model: Peugeot 3008 I, Peugeot 5008 I
• Product Codes: 96859483XT, 96859485XY, 9025Z0
• Additional Numbers: T84, T87
• Color Code: EXY (Black Onyx)
• Side: Driver’s Side (Left)

Function and Benefits

The mirror trim protects the mirror housing edge, conceals the fastening points and contributes to the vehicle’s aerodynamic and visual integrity. A correct-fit mirror cap prevents water ingress around the mirror base and maintains factory appearance after minor impacts or paint damage.

Replacement Guide

Typical replacement steps for a left external mirror cap on Peugeot 3008 I / 5008 I:

1. Fold the mirror glass inward. If necessary, remove the mirror glass carefully according to vehicle-specific instructions to avoid damaging the heater element or actuator.
2. Use plastic trim tools to gently pry the old cover off by releasing the retaining clips. Work gradually around the perimeter to avoid breaking clips or deforming the housing.
3. Clean mating surfaces and check the condition of clips. Replace any broken clips with OEM-type fasteners for secure fitment.
4. Align the new painted cover and press firmly until all clips engage. Reinstall the mirror glass and test mirror adjustment and heating function.
5. Perform a visual check and road test at low speed to confirm correct fit and absence of vibration.

Installation Recommendations

• Use plastic trim removal tools to avoid scratching paint and trim.
• Replace damaged or weakened clips when fitting the new cover to ensure a secure, rattle-free installation.
• Avoid forcing clips; if resistance is high, verify clip alignment to prevent breakage.
• When mirror glass removal is required, follow manufacturer guidance to prevent damage to the heating element or motors.

Why This Part Most Commonly Fails

Mirror covers are most frequently replaced due to external impact (parking knocks, road debris) or progressive deterioration: UV exposure and temperature cycles can cause paint peeling or fading and make plastic clips brittle. Freezing conditions and improper removal methods can also break retaining clips, necessitating replacement of the entire cover to restore proper fit and appearance.

Fitment Notes

Designed to match OEM styling and paint code EXY (Black Onyx). Verify part numbers when ordering to ensure correct finish and side. The part is intended as a direct exterior trim replacement for the listed models.

Genuine chrome front right mirror cover/guard for Peugeot 3008 I and 5008 I. This is a used OE PSA part in EXY – Black Onyx, suitable for quick replacement of a cracked or missing cover without the need for painting (if you have the same shade). Typical search/order codes: 9025Y8, 96859482XT, 96859484XY.

Key benefits
– Original PSA part = exact fit, identical structure and EXY shade, solid chrome bar
– Quick and clean bodywork fix for the A-pillar above the right fender
– Savings compared to a new part, maintaining the factory appearance

Compatibility
– Peugeot 3008 I (T84), year of manufacture approx. 2009–2016, right side (passenger in cars with left-hand drive)
– Peugeot 5008 I (T87), year of manufacture approx. 2009–2017, right side (passenger in cars with left-hand drive)
– Chrome finish (check if you have the chrome version)

Technical information
– Location: in front of the right wing mirror, above the right fender, at the base of the A-pillar
– Color: EXY – Black Onyx (Noir Onyx)
– Design: with integrated chrome bar
– Material: high-quality plastic (OE specification), surface treatment according to the original
– OE/Part Numbers: 9025Y8 (PSA), Replacement/Alternate Numbers: 96859482XT, 96859484XY
– Condition: used original part; fully functional, the usual minor cosmetic marks from use may occur

Assembly and tips
– Mounting on the original mounts/clips; replacement is usually quick without special tools
– If you are matching the shade, check the color code on the car (EXY). No painting is necessary when matching
– Before ordering, compare shape and part numbers (9025Y8 / 96859482XT / 96859484XY) or verify by VIN

What will that solve?
– Replacement of a cracked or missing cap
– Restoration of appearance and aerodynamics in the area in front of the mirror
– Preservation of the original chrome line of the body

Note
– This part is intended for the right side (passenger for LHD). In the case of a different design (without chrome), choose the corresponding variant.

This mirror comes in the color EZRC – Grey Aluminum, perfectly matching your vehicle’s aesthetics. Replacing a faulty mirror is essential, as it not only enhances the look of your car but also maintains safety by providing clear visibility. Frequent issues with side mirrors can occur due to minor accidents or wear over time, making this an important replacement part for your Peugeot.

Technical Information

• Manufacturer: PSA CITROEN PEUGEOT
• Model: Peugeot 3008, Peugeot 5008
• Product Codes: 8153ZV
• Additional Numbers: EZRC

This inner rearview mirror is designed specifically for the first-generation Peugeot 3008 and 5008 models. Featuring automatic dimming technology, it helps reduce glare from headlights during night driving, improving safety and comfort for both professional mechanics and DIY car enthusiasts. Additionally, it includes a smaller mirror section optimized for child monitoring, allowing drivers to keep an eye on passengers in the rear seats without distraction.

Installation and Compatibility

Replacement of the inner rearview mirror is generally straightforward, usually requiring only the removal of the existing mirror and mounting the new unit on the standard bracket attached to the windshield. It is essential to ensure compatibility with Peugeot models 3008 and 5008 first-generation vehicles, as indicated by part numbers 8154JV and 815489, commonly referenced by automotive professionals and customers searching for specific OEM references.

Common Issues and Function

Inner rearview mirrors may lose their automatic dimming ability due to sensor or electrical failures over time. The mirror’s main function is to provide clear rear visibility while enhancing driving safety by minimizing glare. The child monitoring feature is particularly useful for families, making this mirror a practical upgrade or replacement part.

Technical Information

• Manufacturer: PSA Citroën Peugeot
• Models: Peugeot 3008 I, Peugeot 5008 I
• Product Codes: 8154JV, 815489
• Additional Numbers: 815489, 8154JV

Technical Information

• Manufacturer: PSA CITROEN PEUGEOT
• Model: Peugeot 3008 and 5008
• Product Codes: 8153ZG
• Other Numbers: EZRC

Over time, mirror covers can become damaged due to wear and tear, environmental factors, or accidents, which may result in diminished visibility or an unsightly appearance. Replacing the inner mirror cover not only restores the vehicle’s aesthetic but also improves safety by ensuring proper function and visibility.

Installation is straightforward; simply remove the old cover and snap the new one into place, making it an ideal choice for DIY enthusiasts and professional mechanics alike. Regular inspections of your vehicle mirrors are advisable to catch any damages early.

Technical Information

• Manufacturer: PSA CITROEN PEUGEOT
• Model: PEUGEOT 3008, PEUGEOT 5008 (First Generation)
• Product Codes: 8153XT, 8153XV
• Other Numbers: Not applicable