Product Overview

High-quality used driver side exterior mirror suitable for Peugeot 308 (T7). Designed for mechanics and competent DIYers who need a direct replacement that restores electric adjustment and the original exterior appearance. The unit carries the common part code 8153NE and comes in EVG (Vapor Grey) paint—minor surface scuffs are present and can be polished out to match the vehicle finish.

Key Features

• Driver Side (Left) Exterior Mirror Assembly
• Electrically Operated Adjustment (Mirror Motor Included)
• Painted EVG – Vapor Grey Finish
• Direct Fit For Peugeot 308 (T7) Applications
• Part Reference: 8153NE (appearance code EVG / EVGC noted in supplier data)

Technical Information

• Manufacturer: Peugeot / Stellantis
• Model: Peugeot 308 (T7)
• Product Codes: 8153NE
• Other Numbers: EVG (Color Code) — EVGC referenced in supplier notes

Installation Recommendations

Recommended procedure for a safe and correct replacement:

• Fold Mirror To Access Fasteners Where Applicable.
• Remove Inner Door Trim Or Mirror Cover To Reach Mounting Bolts And Wiring Connector.
• Disconnect The Electrical Connector Carefully To Avoid Damaging Clips Or Pins.
• Remove Mounting Fasteners And Take Off The Old Assembly. Compare Fixing Points With New Unit Before Final Fitment.
• Install Replacement Mirror, Reconnect Electrical Connector, And Secure Fasteners To Manufacturer Specifications.
• Test All Functions After Installation: Mirror Adjustment, Heating (If Equipped), Folding Mechanism And Any Integrated Indicators.
• If Paint Touch-Up Or Blending Is Required, Protect Adjacent Panels And Follow Paint Supplier Instructions.

Why This Part Commonly Fails

• Impact Damage From Parking Accidents Or Passing Obstacles Resulting In Broken Housings Or Bent Mounts.
• Water Ingress Causing Corrosion Or Electrical Connector Faults Leading To Motor Or Heating Failure.
• Wear Of The Adjustment Motor Or Internal Gears After Many Cycles.
• Damaged Wiring Or Connector Pins Due To Repeated Folding Or Poor Connections.
• Surface Scratches And Chips From Road Debris—cosmetic issues that often require polishing or repainting.

Notes For Mechanics And DIYers

This mirror is a practical option when replacing a damaged driver side assembly on Peugeot 308 (T7) vehicles. Verify paint tone (EVG/Vapor Grey) before installation if cosmetic match is important. The part is suitable for professional fitting or competent home installation; always check mechanical fit and electrical function before completing door trim reassembly.

Compatibility And Keywords

Fits: Peugeot 308 T7 (Driver Side). Useful search terms: Peugeot 308 mirror, driver side mirror Peugeot 308, 8153NE mirror, EVG Vapor Grey mirror, electric mirror Peugeot 308.

High-quality replacement left (driver side) exterior mirror designed for the Peugeot 308 T7. This electrically operated unit is a direct-fit part commonly referenced under code 8153NE / EZRC, making it easy to find and order for fast repairs. The casing is finished in EZR Gray Aluminium paint and shows light scuffing that can be improved by polishing. Ideal for professional workshops and experienced DIY mechanics who want a reliable, OEM-compatible mirror without long waiting times.

Technical Information

• Manufacturer: Stellantis / Peugeot
• Model: Peugeot 308 T7
• Product Codes: 8153NE, EZRC
• Other Numbers: 8153.NE

Compatibility And Notes

Fits driver side (left) of Peugeot 308 T7 models. Confirm fitment by matching the product code 8153NE or EZRC with your existing part number. The unit is electrically operated; if your vehicle has additional functions (heated glass, electric folding or integrated indicators), verify that the features match before installation.

Installation Recommendation

• Park the vehicle on a level surface and switch off the ignition.
• Carefully remove the interior door trim or triangular mirror cover to access the mirror mounting screws—use trim tools to avoid damaging clips or trim.
• Support the mirror from the outside while loosening the mounting bolts to prevent it from falling.
• Disconnect the mirror electrical connector and remove the old mirror assembly.
• Compare connectors and mounting points, then fit the replacement mirror and hand-tighten mounting bolts.
• Reconnect the electrical connector, align the mirror, fully tighten bolts to manufacturer torque, and refit trim panels.
• Test all electrical functions (adjustment, folding if present, heating) before returning the vehicle to service.

Why This Part Fails Most Often

Exterior mirrors typically fail due to impact damage (collisions with obstacles or other vehicles), water ingress causing connector corrosion, wear of the internal adjustment motor or gearbox, and mechanical strain from repeated folding. Cosmetic issues such as paint scuffs and scratches are usually the result of minor impacts or abrasive contact and can often be improved by polishing.

Why Choose This Unit

Because it is a direct-fit replacement referenced by common product codes (8153NE / EZRC), this mirror reduces diagnosis and sourcing time for workshops. The light scuffing makes it a cost-effective option for repairs where full-body repainting is not required. Designed for professionals and competent DIYers, the unit restores proper electric adjustment and appearance quickly.

Right rearview mirror Peugeot 308 – electric, with temperature sensor, 8 pin (6+2), EZR/EZRC Gris Aluminum paint. Original PSA part number 8153.NC (8153NC). A suitable solution for professional car mechanics and home repairs – quick replacement, precise attachment and identical electrical equipment.

Main features
– Location: right side (passenger)
– Functions: electric adjustment, integrated outdoor temperature sensor
– Connector: 8 pins (6 + 2)
– Cover color: EZR/EZRC – aluminum gray (factory paint)
– Condition: used part, slightly scratched painted part (cosmetic defect does not affect function)
– OEM/PSA Part Number: 8153.NC (also listed as 8153NC)
– Manufacturer’s marking: PSA Citroën Peugeot

Compatibility
– Peugeot 308 (T7), approx. 2007–2013
– Note: before ordering, check the number of connector pins, the presence of the temperature sensor and the paint code according to the VIN or according to the original part. Some versions differ in equipment (e.g. folding function, heating).

Technical information
– Electric control: yes
– Temperature sensor: yes (part of the mirror)
– Connector: 8pin (distribution 6+2)
– Body: 308 (T7) – selected hatchback/SW versions; check compatibility by part number and equipment
– Color: EZR/EZRC Gris Aluminum – suitable for cars with this paint code; can of course be repainted

Why choose this part?
– Original quality and exact fit
– Plug & play with the same connector and equipment
– Reasonable repair costs compared to a new part

Installation recommendations
– Before installation, compare the connector and mechanical attachment with the original mirror.
– Check the wiring and cover attachment, or move the colored cover from the old part if you want to keep the original look.
– After assembly, test the electrical control and the function of the temperature sensor.

Search and keywords
Peugeot 308 Right Side Mirror, Right Outside Mirror 308 T7, 8153.NC, 8153NC, EZR, EZRC, Gris Aluminum, Electric Mirror 8 Pin, Mirror With Temperature Sensor, PSA Citroën Peugeot Used Auto Parts.

Status note
Light scratches on painted parts – visual imperfection without affecting function. The photos are authoritative for the exact condition of the part.

Right external rear -view mirror for 308 series. Electrically operated with integrated temperature sensor and 8 -pin connection (arrangement 6+2). The cover is in KPS (blue bleu to Abyss) and carries light cosmetic abrasions corresponding to normal use. Suitable as a substitute after mechanical damage, or as a quick replacement without painting, if you have the same color code.

Electric control ensures accurate adjustment from the driver’s location, the temperature sensor in the mirror is used to properly function automatic air conditioning and outdoor thermometer. 8 -pin connection (6+2) is typical for versions with a temperature sensor – before ordering, we recommend verifying the connector and equipment compliance so that all functions work correctly.

Fastening and shape correspond to the original part of the dog, so the mirror fits well into the original assembly points. The color cover in the KPS shade can be left, polished or painted; In the case of a different color of the car, the cover can be easily switched to your original.

The assembly is usually straightforward: on the inside of the door, the “triangle” cover is removed from the inside, the electrical connector is disconnected and three mounting screws/mirrors are loosen. Subsequently, the new part is deployed in the opposite order. Before the final tightening, we recommend that you try the electric control and function of the temperature sensor. For some versions, it may be necessary to slide the door filling over to access the connector.

The condition of the part: used part of disassembly, fully functional, with small abrasions on the painted cover (see description). Mechanics and attachment in order.

technical information

• Manufacturer: PSA Peugeot
• Model: 308 (selected version according to Part and Equipment code)
• product codes: 8153nc, 8153.NC
• additional numbers: kps (Bleu color code); 8 pin (6+2); right side (passenger)

Compatibility tip: Before ordering, compare the part number (OE code), number of pins in the connector, the presence of the temperature sensor and the shape of the fastening base. In case of uncertainty, we recommend verifying the conformity according to the VIN.

Direct-fit left side mirror designed for Peugeot 308 (T7) models, carrying the original product reference 8153NE. This electrically operated mirror provides precise remote adjustment of the glass from inside the vehicle and comes pre-painted in EWP (White Banquise) for an immediate visual match to vehicles with the same color code. Ideal for professional workshops and competent DIY enthusiasts who need a reliable replacement that restores functionality and appearance.

Technical Information

• Manufacturer: Peugeot (Stellantis)
• Model: Peugeot 308 T7 — Driver Side
• Product Codes: 8153NE, 8153.NE
• Other Numbers: Color Code EWP / EWPB (Paint: White Banquise)

Compatibility

Fits Peugeot 308 (T7) on the left (driver) side. Confirm fitment by comparing product code 8153NE and paint code EWP when selecting the replacement mirror.

How To Replace

1. Disconnect the vehicle battery to prevent short circuits when working with electrical components.
2. Remove the interior door trim or triangular trim cover to access the mirror mounting screws—use proper trim tools to avoid damage to clips and panels.
3. Carefully unplug the electrical connector(s) behind the mirror, noting connector orientation and clip locks.
4. Unscrew the mirror mounting bolts, support the mirror while removing it to prevent dropping and paint damage.
5. Fit the replacement mirror, tighten mounting bolts to secure but avoid over-torquing, reconnect the electrical connector, and test all electrical functions (adjustment, heater/folding if equipped) before reassembling the trim.
6. Reinstall interior trim and reconnect the battery. Verify mirror alignment and operation on the road at low speed.

Installation Recommendations

• Always Disconnect The Battery Before Starting Work To Avoid Short Circuits.
• Use Plastic Trim Tools To Prevent Damage To Door Panels And Clips.
• Inspect Wiring And Connector Pins For Corrosion Or Damage; Clean Contacts If Necessary.
• After Installation, Verify All Functions (Adjustment, Heating, Folding) And Adjust Mirror Position From Driver Seat.
• For Complex Electrical Variants (Power Folding, Integrated Indicators), Consider Professional Installation If Uncertain.

Why The Part Most Commonly Fails

Exterior mirrors most often fail due to physical impact (parking collisions, side-swipes, or road debris). Electrical faults arise from water ingress or corrosion at connector pins, causing motor or heating element failure. Repeated mechanical stress on the folding mechanism can also wear gears, leading to noisy or non-functional adjustment.

Benefits

Pre-Painted OEM-Fit Replacement: Saves time on painting and ensures consistent appearance. Restores full electrical adjustment functionality and helps maintain vehicle safety and driver visibility. Frequently Searched By Product Number: 8153NE — useful keyword for quick lookup in parts catalogs.

The interior rearview mirror compatible with Citroën C3 Picasso, C-Elysée, C5 III, and Peugeot models 301, 308, 3008, 5008, among others, is an essential component for safe driving and efficient traffic awareness. This rearview mirror, finished in sleek black Cornelie (FXT), is a reliable replacement part bearing the product code 8153LN. It represents an excellent choice for restoring or repairing your vehicle.

Equipped with this mirror, drivers gain confidence and accuracy needed for rearward visibility while driving. The mirror is designed to deliver a clear, distortion-free reflection, offering enhanced situational awareness behind the vehicle. Replacement is straightforward, making it suitable for both professional mechanics and car enthusiasts performing DIY repairs.

Technical Information

• Manufacturer: Citroën, Peugeot
• Models: Citroën C5 III, C-Elysée, Peugeot 301, 308, 3008, 5008
• Product Codes: 8153LN
• Additional Codes: FXT- – Black Cornelie

This rearview mirror is frequently sought after for its functionality and unique design tailored to the interior style of the listed vehicle models. Its black finish and high-quality manufacturing ensure the part is both a practical and visually appealing addition to your car’s interior. Using this mirror improves driving safety and overall comfort.

If you are looking for a dependable and cost-effective interior rearview mirror replacement for your Citroën or Peugeot vehicle, this part fully meets expectations for form, function, and road safety.

This product is compatible with the Peugeot 308 models and is manufactured to meet high-quality standards, ensuring durability and reliability on the road.

Frequent wear and tear can lead to the failure of side mirrors due to exposure to environmental factors or impact from minor accidents. Regular inspection and timely replacement are recommended to maintain optimal visibility and safety.

Technical Information

• Manufacturer: PSA CITROEN PEUGEOT
• Model: 308
• Product Codes: 8153NC
• Other Numbers: KTV – Black Pearl Lacquer

This left side mirror is a direct-fit replacement for the Peugeot 308 (T7) driver side door. It offers full electric adjustment and comes finished in KTV Black Pearl Nera paint. Ideal for professional workshops and competent DIY enthusiasts who need an immediate, compatible spare part. The unit is ready to fit and restores mirror adjustment, heating and folding functions where present — a cost-effective solution after parking damage or glass breakage.

Technical Information

• Manufacturer: Stellantis (Citroën/Peugeot)
• Model: Peugeot 308 (T7)
• Product Codes: 8153NE, KTVD
• Additional Numbers: 8153.NE

Installation

Replacement is straightforward for a trained mechanic or an experienced DIYer. Typical steps:

• Remove the interior door trim and the small triangular cover at the mirror mounting point using appropriate trim tools to avoid damage.
• Disconnect the electrical connector for the mirror (note orientation and latch type).
• Unscrew the mirror mounting bolts and remove the mirror assembly from the door.
• Fit the replacement mirror, secure the mounting bolts to the manufacturer torque specification, and reconnect the electrical connector.
• Before refitting the door trim, test all mirror functions (adjustment, heating, folding) and correct any alignment issues.

Recommendations For Installation

• Use proper trim removal tools to prevent damage to the door panel.
• Verify connector pins are clean and dry; apply dielectric grease if appropriate to prevent corrosion.
• Test the mirror operation before final assembly to save time if further adjustments are needed.
• Follow manufacturer torque settings for mounting bolts and take care not to overtighten plastic mounting points.

Why The Part Most Commonly Fails

Side mirrors most frequently fail because of external impact (parking knocks, side-swipes) which damages the housing, glass or folding mechanism. Electrical failures are typically caused by water ingress into connectors, corrosion, or wear of the small electric motor and gears used for mirror adjustment and folding. Paint abrasion and scratches are common but do not affect mechanical or electrical function.

Why Choose This Unit

Perfect for garages and experienced DIYers looking for an OEM-compatible replacement, this mirror offers original fitment and functionality. It is especially useful when the original has cosmetic damage or when mirror glass or adjuster motors have failed. Frequently searched by product code 8153NE / KTVD, it enables quick identification and faster repair turnaround.

This replacement part is designed for durability and long-lasting performance, making it an excellent choice for both professional mechanics and car enthusiasts performing DIY repairs. Its universal fit across multiple models guarantees reliable compatibility, restoring both functionality and aesthetic quality to your vehicle's cabin.

Technical Information:

• Manufacturer: PSA Citroen Peugeot
• Models: PEUGEOT 308, 508; CITROEN C4 II B7, DS4, C3 PICASSO
• Product Codes: 96758889XT 8154SA
• Additional Numbers: FXT – Black Cornelie

The interior rearview mirror's electric dimming function helps reduce glare from headlights during night driving, enhancing safety and reducing eye strain. The mirror's failure often results from sensor or dimming mechanism wear over time, making timely replacement essential. Installation involves removing the original mirror assembly and fitting this part securely onto the mounting clip, with no need for additional wiring changes if your car is already equipped with the dimming feature.

Choose this original-quality mirror to keep your vehicle's interior looking factory-finished while improving visibility and driving safety. Ideal for quick and efficient replacement projects, this part helps maintain your Citroen or Peugeot's comfort and style.

Order your replacement left side mirror for the PEUGEOT 308 and ensure safe driving with a complete view of what’s behind your vehicle. We offer an original used mirror that is fully functional and ready for installation. This is a great option for those who want to maintain the authenticity of their vehicle while saving costs on purchasing a new part.

This left mirror is designed specifically for the PEUGEOT 308 models and is equipped with modern features such as electric operation and folding, enhancing comfort and safety while driving. The mirror contains 8 wires for connection and is available in an attractive BOURRASQUE color, which adds a stylish look to your car.

Technical Information:
Manufacturer: PSA CITROEN PEUGEOT
Model: PEUGEOT 308
Product Codes: 8153NG KGNC
Additional Numbers: Not Specified
This part is original and has been carefully dismantled from a vehicle, ensuring high quality and long lifespan. It is ideal for anyone seeking a reliable and cost-effective replacement part.

Don’t wait for your damaged mirror to become a hazard to your safety; order this quality replacement part today. Your PEUGEOT 308 deserves the best care, and you deserve peace of mind while enjoying safe and comfortable travels.