Description

This left side exterior mirror is a direct-fit replacement for the Peugeot 206, offering electric adjustment and a heated glass element for clear vision in cold or wet conditions. Finished in EZR Grey Aluminium paint, it is intended for the driverʼs door and uses a 5-pin electrical connector. The part numbers associated with this unit include 96480953XT and 8153KQ, making it easy to find via catalog searches or part-number lookups.

Designed for professional workshops and competent DIY mechanics, this mirror restores full functionality—mirror adjustment and heating—after impact or electrical failures. The unit is an advantageous choice when the original mirror housing or electronics are damaged but the door mounting points are intact. Minor cosmetic marks are visible as shown in the photos.

Technical Information

• Manufacturer: Peugeot / Stellantis
• Model: Peugeot 206 (Driver Side)
• Product Codes: 96480953XT, 8153KQ
• Other Numbers: EZR, 5-pin connector

Installation Recommendations

Installation is straightforward for an experienced technician. Typical steps:

• Remove the interior triangular trim on the driver door to access the mirror mounting nuts.
• Disconnect the 5-pin electrical connector before loosening the fixing nuts.
• Unscrew the mirror retaining nuts, support the mirror to prevent dropping, and remove the old unit.
• Fit the replacement mirror, tighten the mounting nuts to the manufacturerʼs torque, reconnect the electrical plug and test adjustment and heating functions before refitting the trim.

Recommended tools: Torx/spline sockets or appropriate spanners, trim removal tools, and a multimeter for electrical checks. Always disconnect the battery or isolate the vehicle electrical system before working on powered mirrors to avoid short circuits or accidental motor operation.

Why This Part Fails Most Often

Common failure causes for exterior mirrors on the Peugeot 206 include:

• Impact damage from collisions or knocks, leading to broken housings, cracked glass, or stripped mounting points.
• Wear of the mirror adjustment motor or actuator after long service life or heavy use.
• Corrosion or wiring faults in the connector and door harness, causing intermittent or complete loss of power to the heater or motor.
• Failure of the heating element due to moisture ingress or electrical issues.

Fitment Notes

This unit is specified for the Peugeot 206 driver side with electric adjustment and heating functions. Verify the 5-pin connector and EZR paint code match the vehicle specification before installation. Part numbers 96480953XT and 8153KQ are commonly used references for this mirror.

Overview

This replacement right (passenger-side) exterior mirror is a direct-fit option for Peugeot 206 models. Designed to match the original mounting points and electrical connections, it is suitable for body-repair jobs and routine mirror replacement. The part is ideal for mechanics and DIY enthusiasts who search by part number or color code when sourcing a matching unit.

Key Features And Benefits

• Direct Fit For Peugeot 206 Series — simple swap with original mounting locations and fixing points.
• Color Code EKQ — Painted LUCIFER RED For Perfect Visual Match (other colors available).
• Available With Electrical Connections For Power Adjustment/Heating Depending On Variant — check product codes below.
• OE-Style Housing And Glass For Factory-Like Appearance And Function.
• Optimized For Fast Replacement In Bodyshops And Home Garages — reduces repair time.

Technical Information

• Manufacturer: Stellantis (Peugeot OEM)
• Model: Peugeot 206, Peugeot 206+
• Product Codes: 96432613XT, 96437171XT
• Other Numbers: 8148XY, 8154JC, EKQ

Compatibility And Variants

The mirror fits Peugeot 206 platforms and certain 206+ variants. Depending on the original vehicle specification the mirror may be manual or electrically adjustable and may include a heated glass element. Identification by the listed product codes or color code EKQ ensures the best chance of a correct match.

Installation Recommendations

• Prepare Required Tools: trim tools, Torx/screwdrivers, and socket set as needed for the interior door panel and mirror fasteners.
• Access: Remove the interior door trim or triangular trim panel to expose mirror bolts and electrical connector.
• Disconnect Electrical Connector: Carefully unplug the mirror wiring before removing fasteners to prevent damage to pins and clips.
• Remove Fasteners: Unscrew the mirror retaining bolts and support the mirror while removing it from the door.
• Install Replacement: Position the new mirror, tighten fasteners to manufacturer torque, reconnect the electrical connector and refit trim pieces.
• Functional Check: Verify power adjustment, heating function (if equipped) and mirror folding operation before finishing the job.
• Safety Tip: Work On A Stable Surface And Protect Painted Surfaces During Installation.

Reason For Most Common Failures

• Impact Damage: The most frequent cause—collision or side-swipe leads to cracked housing or broken glass.
• Motor Wear Or Gear Failure: Repeated use and age can wear the adjustment motor or internal gearing on electrically adjustable mirrors.
• Water Ingress And Corrosion: Moisture can corrode connectors or short heating elements, causing intermittent or permanent failure.
• Broken Mounting Points: Plastic studs or clips may shear during impacts or improper removal.

Maintenance And Troubleshooting

Regular visual inspections after minor impacts and checking electrical function after door washes helps detect early issues. If adjustment is slow or erratic, inspect connector condition and wiring for corrosion. Replace the mirror assembly if the housing or glass is structurally damaged.

Why Choose This Part

This mirror provides an economical and visually matching replacement for Peugeot 206 repairs, carrying original-style fitment and paint-matched finish in EKQ LUCIFER RED. Clear product codes included make it easy to locate the correct unit quickly — important for workshops where time and accuracy matter.

Product Overview

This right-hand (passenger side) exterior mirror is a direct-fit replacement for Peugeot 206 models and compatible variants such as the 206+. Finished in KTH Thorium Gray paint, the unit restores exterior appearance and mirror functionality. Ideal for professional workshops and DIY mechanics looking for a cost-effective body repair part that matches original equipment styling and fitment.

Features And Function

• Replacement mirror assembly for passenger (right) side of the vehicle.
• Painted Finish: KTH (Thorium Gray) to match factory body color.
• Includes mounting points and wiring interface for powered/heated variants where applicable.
• Typical functions: manual or electric adjustment, possible heating element depending on original equipment.

Technical Information

• Manufacturer: Stellantis (Peugeot/Citroën)
• Model: Peugeot 206, Peugeot 206+
• Product Codes: 96432613XT, 96437171XT
• Additional Numbers: 8148XY, 8154JC, KTH
• Side: Right (Passenger)
• Color: KTH – Thorium Gray
• Condition Note: Slightly Scuffed

Fitment And Compatibility

Fitment is intended for Peugeot 206 series vehicles and commonly referenced under the above product codes. Always confirm that the part numbers match those of the original mirror on the vehicle. This unit follows OE-style mounting and should align with factory door brackets on compatible models.

Installation Recommendations

• Preparation: Gather Torx/screwdriver set and trim tools. Work on a clean, dry surface and protect painted panels.
• Electrical Safety: If the mirror has electrical functions (adjustment/heating/folding), disconnect the negative battery terminal before unplugging electrical connectors to avoid shorts.
• Removal: Lower window for access if required. Remove interior triangular trim or cover on the door, disconnect the mirror electrical connector, then remove the mounting fasteners (usually three bolts). Carefully support the mirror during removal to avoid dropping and damaging the door skin or trim.
• Installation: Position the replacement mirror, loosely fit fasteners, connect the electrical plug, test all electrical functions (adjustment, heating, folding) before fully tightening fasteners, then re-fit interior trim.
• Adjustment: After installation, adjust mirror glass to driver’s view and check for wind noise at speed. Ensure seals and gaskets are seated to prevent water ingress.

Why This Part Fails Most Often

• Impact Damage: Collisions or side-swipes are the most frequent cause—physical breakage or bent mounting points.
• Wear On Internal Mechanism: Electric motors and gearing can wear out over time, especially with frequent adjustment or folding.
• Water Ingress And Corrosion: Moisture entering through damaged seals can corrode connectors and motors, causing intermittent or permanent failure.
• Glass Damage: Stones or direct impacts can crack the mirror glass while the assembly remains otherwise intact.
• Cosmetic Wear: Paint chipping or scuffs (as noted on this unit) usually result from minor impacts or abrasion and do not affect mechanical function.

Maintenance Tips

• Regularly check mirror seals and door trim for gaps that could allow water entry.
• Operate electric mirror functions occasionally to keep internal gears lubricated and prevent seizure.
• Address paint chips quickly to prevent corrosion on metal components.

Notes For Professionals

This part is suitable for fitment by experienced technicians and competent DIYers. Verify part numbers from the door mirror label or original part reference before installation to ensure correct variant (heated, electric, folding or manual) is fitted.

Direct replacement exterior mirror designed for Peugeot 206 series. Ideal for professional workshops and experienced DIY mechanics who search parts by product codes. This mirror matches the original mounting points and paint code EYL (Iceland Gray) to ensure a neat finish after installation. Suitable for vehicles that require the listed product numbers and visual match.

Technical Information

• Manufacturer: Stellantis (Peugeot)
• Model: Peugeot 206, Peugeot 206+
• Product Codes: 96432613XT, 96437171XT
• Other Numbers: 8148XY, 8154JC, Color Code EYL

Fitment

Right-hand (passenger side) exterior mirror for Peugeot 206 models. Confirm fitment by matching the product codes listed above. Commonly used on standard door assemblies where the mirror has the same mounting pattern and connector interface.

Installation Recommendation

• Work in a clean, well-lit area and gather basic tools (panel trim tool, screwdriver set, socket set).
• Carefully remove the small trim panel or triangular cover on the inside of the door to access the mirror fasteners.
• Disconnect the electrical connector if equipped. For safety, disconnect the vehicle battery prior to unplugging electrical connectors when working on door electronics.
• Unfasten the mirror mounting screws or nuts, support the mirror while removing to avoid dropping or damaging the door skin.
• Install the replacement mirror in reverse order: secure mounting fasteners, reconnect the electrical connector, test mirror adjustment and any electrical functions before refitting interior trim.
• If the mirror is painted to match the vehicle, inspect paint finish and alignment before completing the job.

Common Failure Reasons

• Impact Damage: Collisions, side-swipes, or parking lot strikes are the most frequent causes of damage.
• Mechanical Wear: Repeated folding and unfolding can wear gears or pivot points, causing loose movement.
• Electrical Faults: Corrosion or connector damage (on electrically adjustable or heated mirrors) can disable functions.
• Glass Breakage: Stones, vandalism, or accidental strikes can crack or shatter the mirror glass.
• Paint and Housing Damage: Weather, corrosion, or impact can compromise the housing and finish.

Notes For Mechanics And DIYers

Customers and workshops often search for this part by product codes (96432613XT, 96437171XT, 8148XY). Verify that the paint code EYL corresponds to the vehicle’s color for a seamless match. There is no fixed service interval for exterior mirrors; replacement is usually required after damage or loss of function.

Original right outside rearview mirror for Peugeot 206 / 206+ with integrated outside temperature sensor. This is a used OEM disassembly part, ideal for a quick and cost-effective repair without compromising fit and function. Paint in the shade EZRC – Gray Aluminum (metallic), which often makes it unnecessary to paint.

Key benefits
– Original PSA part: precise fit, shape and quality of materials
– Outside temperature sensor part of the mirror
– Lacquered cover in the color EZRC – Gray Aluminum
– Suitable for car mechanics and home repairs; quick change without modifications

Technical information
– Location: right (passenger side)
– Model: Peugeot 206 / 206+
– Paint color/code: EZRC (Grey Aluminum)
– Equipment: integrated outdoor temperature sensor
– Mounting: standard PSA (type 206), 3-point
– Electrics/connector: according to the specific equipment of the car – before ordering, compare the shape of the connector and the number of pins
– OEM/cat. numbers: 96432613XT, 8154.JC (8154JC)
– Condition: used part; may show normal cosmetic signs of use, fully functional – see photo for condition

Compatibility
– Peugeot 206 (approx. 1998–2009) – depending on equipment
– Peugeot 206+ (approx. 2009–2012) – according to equipment
Note: Different versions of the 206 differ in wiring and equipment (manual/electric control, heating, etc.). Always verify compatibility by OEM numbers 96432613XT / 8154.JC, connector shape and your car’s equipment. You can send us the VIN just to be sure.

Assembly tips
– Before removing the old part, disconnect the battery (because of the temperature/electricity sensor)
– Compare the connector and the direction of inclination of the socket
– After installation, check the function of the temperature sensor on the on-board computer
– EZRC paint usually fits cars with EZRC code; in the event of a deviation, the cover can be easily repainted or reversed

Searching by part number?
– Right mirror Peugeot 206 EZRC 96432613XT 8154JC
– 96432613XT
– 8154.JC / 8154JC
– Peugeot 206 right mirror with temperature sensor, gray metallic EZRC

Why choose a used original?
– Better fit and durability than cheap replicas
– Saving time during assembly
– Economical and ecological repair solution

If you are not sure about compatibility, write – we will help to verify according to the VIN and photos of the connector.

This right-hand passenger mirror is designed for Peugeot 206 models and comes with a Blue Metallic (KMFD) painted cover. Ideal for mechanics and DIY enthusiasts who need a direct replacement using the original mounting points and connector layout. Common search keywords include Peugeot 206 mirror right, 96437171XT, 8148XY, KMFD mirror, and passenger side mirror Peugeot — include these product codes when searching to quickly locate compatible parts.

Fitment And Compatibility

Designed To Fit: Peugeot 206. May Also Fit: Some Peugeot 206+ variants depending on trim and original equipment. Always check the product codes and physical connector/mounting arrangement against the vehicle when replacing the part.

Technical Information

• Manufacturer: Peugeot / Stellantis
• Model: Peugeot 206 (compatible with certain 206+ variants)
• Product Codes: 96437171XT, 8148XY, 8148.XY
• Additional Numbers: KMFD (Paint Code – Blue Metallic)
• Position: Right / Passenger Side

Function And Features

The exterior mirror provides rearward visibility and correct aerodynamic shape for the vehicle. Depending on the vehicle’s original equipment level, the mirror may be manual or electrically adjustable and can have painted cover matching the body color (KMFD). The unit mounts to the door using factory fasteners and connects to the vehicle’s mirror adjustment wiring where applicable.

How To Replace

Replacement Is Straightforward For Experienced Technicians:

• Remove Interior Door Trim Or Triangular Cover To Access Mirror Fasteners.
• Disconnect The Mirror Electrical Connector (If Present).
• Unscrew Mounting Bolts And Carefully Remove The Old Mirror.
• Fit The New Mirror, Tighten Fasteners To Manufacturer Torque Specifications, And Reconnect Wiring.
• Reinstall Trim And Verify Proper Operation: Adjustment, Folding (if fitted), And Any Heating Function.

Installation Recommendations

For Safe And Reliable Installation: Disconnect The Vehicle Battery Before Working On Electrical Connections To Prevent Short Circuits. Use Proper Trim Tools To Avoid Damaging Interior Panels. Ensure Fasteners Are Torqued According To Manufacturer Specifications And That Wiring Plugs Are Fully Seated. After Installation, Verify Mirror Adjustment Range And Any Electrical Functions Work Correctly.

Why This Part Most Commonly Fails

External Mirrors On Small Cars Fail Primarily Due To Impact Damage From Parking Collisions Or Road Debris. Common Failure Modes Include Broken Mirror Glass, Damaged Housing, Seized Or Failed Adjustment Motor (caused by Water Ingress Or Wear), And Corrosion Of Mounting Points Or Connectors. Mechanical Wear From Frequent Folding Or Accidental Force Can Also Compromise The Mechanism.

Notes For Professionals And DIYers

When replacing a painted mirror, minor differences in paint tone can occur depending on age and exposure of the original panel. If the vehicle has additional features (electric folding, heating, or integrated indicators), confirm the connector pinout and functions before final assembly to ensure full compatibility.

Product Overview

High-quality replacement left (driver-side) exterior mirror designed for Peugeot 206. This unit is a direct-fit option for quick replacement and is commonly searched by part numbers 96429956XT and 8148YC. The mirror housing is supplied in black; alternative painted versions are available from stock. Ideal for professional workshops and experienced DIY enthusiasts who need a reliable, roadworthy replacement after impact or wear.

Key Benefits

• Direct Replacement: Designed to match original mounting points for straightforward installation.
• Stock Availability: Black color commonly stocked; additional colors available to match vehicle trim.
• Search-Friendly Codes: Frequently located using OEM/Product codes (96429956XT, 8148YC, 8148.YC).
• Durable Construction: Robust plastic housing and secure fixing points for long service life under normal use.

How It Works And When It Fails

The exterior mirror provides driver visibility of the left lane and rear quarters, reducing blind spots and supporting safe lane changes. Common failure modes include impact damage (collisions, door knocks), cracked or shattered glass, motor or actuator failure in electrically adjustable units, corrosion or wiring faults affecting heating or folding functions, and broken mounting tabs from repeated stress or minor collisions. Mechanical wear to the adjustment mechanism and degraded seals allowing water ingress are frequent causes of malfunction.

Replacement Procedure

Typical replacement steps for a mechanic or competent DIYer:

1. Remove Interior Door Trim Panel To Access Mirror Fasteners And Electrical Connector.
2. If Applicable, Carefully Disconnect Mirror Electrical Connector (Power Adjustment, Heating, Folding).
3. Remove Mounting Nuts/Screws And Detach Old Mirror Assembly From Door.
4. Fit New Mirror Assembly, Secure Fasteners To Manufacturer Torque Where Available, And Reconnect Electrical Connector.
5. Refit Door Trim Panel, Test All Mirror Functions (Adjustment, Heating, Folding) And Adjust Mirror Glass For Correct Field Of View.

Note: If The Mirror Includes Electrical Functions, It Is Recommended To Disconnect The Battery Before Working On The Electrical System To Prevent Short Circuits Or Unintended Airbag Deployment In Vehicles Where Door Trim Removal Affects SRS Components.

Technical Information

• Manufacturer: Stellantis (Peugeot/Citroën)
• Model: Peugeot 206
• Product Codes: 96429956XT, 8148YC, 8148.YC
• Other Numbers: 8148.YC | 8148YC | 96429956XT

Installation Recommendations

Ensure Door Trim Removal Is Performed Carefully To Avoid Damaging Clips Or SRS Components. Use Appropriate Tools And A Suitable Torque Wrench For Mounting Fasteners. For Mirrors With Electrical Functions (Heated Or Power-Folding), Confirm Connector Pins Are Clean And Secure; Apply Dielectric Grease If Necessary To Prevent Corrosion. If Painting The Housing To Match Body Color, Mask Electrical Connectors And Mirror Glass Properly Before Spray Painting.

Why This Part Is Most Commonly Replaced

Exterior mirrors are most often replaced due to accidental impact (parking lot knocks, side collisions), vandalism, or progressive failure of internal actuators and heating elements. Weather exposure and water ingress can accelerate corrosion of contacts and motors, while repeated mechanical stress can break mounting tabs and hinge components.

Who Should Fit This Part

Suitable For Experienced DIYers And Professional Automechanics. Professional Fitting Recommended For Vehicles With Integrated Electrical Features Or Where Door Trim Removal Involves Airbag/Restraint Systems.

Search Tips

Customers Often Find This Part By Searching Product Codes: 96429956XT, 8148YC, Or By Vehicle Model: Peugeot 206. Including These Codes In Your Search Will Improve The Likelihood Of A Quick Match.

Original right rearview mirror for Peugeot 206/206+. This is a used OEM PSA part, suitable as a full replacement for a damaged mirror. Thanks to the original codes 96437171XT and 8148XY, you can easily verify compatibility – the part fits exactly into the original mounts and connectors of the specific equipment.

Key benefits
– Genuine PSA part – better fit and durability than cheap replacements
– Correct side: right mirror (passenger)
– Suitable for Peugeot 206 and 206+ (check by codes and connector)
– Quick installation without modifications – mounting and connector as factory
– Economical and ecological repair with verified part number

Technical information and compatibility
– OEM/PSA codes: 96437171XT, 8148XY
– Location: right side (passenger)
– Models: Peugeot 206, 206+ (always verify compatibility by OEM code and connector type)
– Control/equipment: electric or manual control, heating or folding depending on the specific piece – follow the photos and the number of pins in the connector
– Color/cover: execution according to photos; with painted covers, the shade may be different from your car – it can usually be repainted
– Mounting: original spacing and PSA foot, mounting in serial holes

How to verify that a part fits
– Compare the OEM codes on your original part with 96437171XT / 8148XY
– Check the shape of the foot, the type and number of pins in the connector in the photos
– Check if you have the same equipment (manual/electric control, heating, electric folding, etc.)
– In case of uncertainty, send us the VIN – we will verify compatibility

Condition and contents of the package
– Used original part, normal cosmetic signs of use
– We deliver exactly what you see in the photos (complete/without cover/glass according to the specific offer)
– Always judge the functionality and possible defects according to the detailed photos

Assembly tip
– Before assembly, compare the connector and seal, tighten evenly, after connection, test the positioning and possible heating of the mirror

Search terms: right wing mirror Peugeot 206, passenger mirror 206+, OEM 8148XY, 96437171XT, outside mirror Peugeot 206, original used mirror PSA.

Upgrade or replace a worn interior mirror with this reliable OEM-fit rear-view mirror for Citroën and Peugeot models. Designed to restore clear rear vision and the factory fitment, this mirror is often sought under the part code 8149WZ. Ideal for professional workshops and DIY mechanics, the unit delivers straightforward installation and immediate improvement in driver visibility after replacement.

Key Benefits

– Direct fit for multiple Citroën and Peugeot models, reducing installation time and alignment work.
– Restores original sightlines and mounting geometry for safe driving.
– Commonly available under the reference 8149WZ, so it’s easy to find and order for repairs or fleet maintenance.

Technical Information

• Manufacturer: Stellantis (Citroën / Peugeot)
• Model: Citroën C1; Citroën Berlingo (I & II); Peugeot 107; Peugeot 206; Peugeot Partner (I & II)
• Product Codes: 8149WZ
• Additional Numbers: No further cross-reference numbers supplied

Fitment And Compatibility Notes

The mirror is intended as a direct-replacement interior rear-view mirror for the vehicle models listed above. Vehicles can differ by mounting type (push-fit button on the windshield or screw-mounted bracket) and by presence of electrical connections (e.g., for auto-dim or integrated sensors). Verify the mirror mounting style on the vehicle before ordering to ensure correct fitment.

Installation Recommendations

Suitable for experienced mechanics and competent DIYers. Typical replacement steps:

• Carefully remove the trim around the mirror base if present to access retaining screws or the mounting button.
• If the mirror is push-fit on a mounting button, release the catch or slide the mirror off the button following manufacturer procedure.
• If electrical connectors are present, disconnect them gently and note connector orientation.
• Install the new mirror onto the mounting button or bracket and secure any screws/clips. Reconnect electrical plugs if applicable and test functionality (day/night switch, dimming if present).
• Check mirror alignment and secure any trim pieces removed. Typical installation time: 15–30 minutes depending on vehicle and whether connectors are involved.

Common Reasons For Failure

Interior mirrors usually fail or require replacement for the following reasons:

• Impact Damage: Sudden impacts or heavy door closing can crack glass or break the housing.
• Mounting Wear: Over time the adhesive pad or button bracket can lose adhesion or develop play, causing vibration and poor visibility.
• Housing Degradation: Long-term sun exposure can degrade plastic components, leading to cracks or loosening.
• Electrical Faults: For electrified mirrors, wiring or connector corrosion and internal sensor faults may cause loss of auxiliary functions.

Why Choose This Part

This 8149WZ mirror is a cost-effective, workshop-friendly option that matches original fitment for common Citroën and Peugeot models. It’s well suited for everyday repairs, vehicle refurbishments, and fleet maintenance where reliable sightlines and OEM-style mounting are required.

Note For Professionals

Always confirm the mirror mounting type and presence of any electrical features on the vehicle prior to ordering. Use suitable tools and manufacturer-recommended methods when removing and installing mirrors to avoid damage to the windshield, headliner, or electrical connectors.

This interior rear-view mirror (OEM reference 814842 / 8143GP) is a direct-fit replacement for a range of Citroën and Peugeot small cars and light commercial vehicles. Designed for easy installation and reliable day-to-day use, it restores clear rear visibility and original mounting geometry — important for safety and driver comfort. Frequently searched by part numbers 814842 and 8143GP, this mirror is suitable for professional workshops and competent DIY enthusiasts looking for a cost-effective OEM-compatible solution.

Technical information

• Manufacturer: Stellantis (Citroën / Peugeot)
• Model: Interior Rear-View Mirror
• Product Codes: 814842, 8143GP
• Additional Numbers: 8143GP | 814842

Compatibility

Compatible with a range of models (check vehicle equipment level): Citroën C1; Citroën Berlingo (generations I & II); Peugeot 107; Peugeot 206; Peugeot Partner (generations I & II). Confirm fitment by matching the part number 814842 / 8143GP with the vehicle’s original part listing.

Function And Common Equipment Variants

The mirror provides the primary interior rearward view and a secure mounting point on the windshield or overhead bracket. Depending on vehicle trim it may be a simple manual mirror or part of an assembly that includes features such as an anti-dazzle coating (manual or automatic), integrated microphone, or ambient sensors. This product is supplied as the interior mirror unit and is intended to match the original mounting style and geometry.

Replacement Procedure

Typical replacement steps for experienced mechanics or competent DIYers:

• Park the vehicle on level ground and ensure the ignition is off.
• If the mirror has electrical connectors (auto-dim, microphone, lighting), disconnect the negative battery terminal before removing the mirror to avoid short circuits.
• Remove any plastic trim or cover concealing the mirror base. For windshield-mounted mirrors, release the retaining clip or slide off the mirror from the mounting button. For bracket-mounted mirrors, remove the fixing screw(s) and unplug any connectors.
• Fit the new mirror onto the original mounting button or bracket. Ensure the clamp or screw is tightened to the manufacturer’s torque specification and that the mirror is properly aligned.
• Reconnect electrical connectors, restore battery connection if disconnected, and test all functions (manual/auto-dim, microphone, lights) before refitting trim.

Installation Recommendations

• Use OEM-style mounting hardware and avoid over-tightening to prevent damage to the mirror base or windshield button.
• If the mirror attaches to an adhesive button on the glass, inspect the button and windshield surface; replace the adhesive pad or button if damaged. For adhesive-mounted systems, perform installation at moderate temperatures to ensure proper bonding.
• If the unit has electrical features, verify connector seating and wiring integrity. After installation, confirm functionality (mirror adjustment, auto-dim if present, integrated microphone) before returning the vehicle to service.
• When in doubt about integrated sensors or complex assemblies, follow the vehicle manufacturer’s service manual procedures.

Reason Why The Part Most Commonly Fails

Interior mirrors typically fail due to mechanical damage from impact (e.g., collisions, objects striking the windshield area), broken or fatigued mounting clips, or deterioration of the adhesive bond on windshield-mounted buttons. Electrical variants can lose function because of connector corrosion, wiring damage, or internal component failure in auto-dimming modules. Normal wear does not usually mandate scheduled replacement — most faults are caused by external damage or failed ancillary components.

Suitable For Both Professional Workshops And Experienced DIYers. Part numbers 814842 and 8143GP are commonly used to locate the correct replacement quickly.