Part description

Used tailgate handle for Peugeot 207 SW marked ETSC, intended for convenient control of opening the tailgate thanks to the integrated switch. Thanks to the original PSA design, it is suitable as a replacement for a damaged handle (cracks, play, non-functioning switch) and will preserve the original appearance of the car in ETS – Cendre gray paint.

The part is often searched by number, so we also include the product code 8742R2 and the designation ETSC for easy pairing with the existing part.

Technical information

• Manufacturer: Stellantis Citroën Peugeot
• Model: Peugeot 207 (label: Peugeot 207; name: 207 SW)
• Other numbers: ETSC
• Design: back cover handle with switch
• Color: ETS – Cendre gray lacquer

Product codes

• Product codes: 8742R2

Installation recommendations

Generally/typically this involves replacing the handle of the outer part of the back cover with the switch. The exact steps may vary depending on the specific car model and equipment.

1) Before assembly (checks of used part)

• Compare with the old piece: handle shape, location and type of switch, connector/wiring (if included), and whether the 8742R2 / ETSC markings match.
• Check the condition of the paint surface (ETS – gray Cendre), cracks, broken handles and smooth operation/closing of the switch.
• Verify that the contact part of the switch is clean and free of obvious corrosion or moisture.

2) Necessary tools and materials (in general)

• Normal set of hand tools (screwdrivers, socket wrenches according to design)
• Plastic crowbar for removing upholstery/lining
• Cleaning agent and cloth (for contact surfaces)
• Possibly insulating tape/tapes to secure cabling

3) Step-by-step assembly procedure

1. Secure the vehicle against movement and open the tailgate.
2. Disconnect negative battery terminal (recommended for switch/electric parts).
3. Remove the inner lining/upholstery of the rear cover to gain access to the handle mount and switch connector.
4. Locate the handle switch connector and carefully disconnect it.
5. Loosen the fixing of the handle (nuts/screws depending on the version) and pay attention to the plastic handles.
6. Remove the old handle and check the contact surface (dirt, seal residues, damage to the surroundings).
7. Clean the contact surfaces so that the new handle fits properly and there is no play.
8. Place the new handle in the hole and align it to the correct position.
9. Attach the handle in the original way; tighten carefully to avoid cracking the plastic.
10. Plug the switch connector back in and make sure it snaps into place.
11. Reinstall the rear cover inner trim.
12. Connect the battery.
• 4) Post-assembly checks and function verification
  • Test the function of the back cover opening switch repeatedly (short presses, different grip angles).
  • Check that the handle holds firmly, has no play and does not rub anything.
  • After closing the lid, verify that the lid clicks properly and then opens without a problem.

  5) The most common assembly mistakes + how to avoid them

  • Damage to the plastic handles when removing the trim: use a plastic pry bar and proceed evenly.
  • Undertightened/conversely overtightened fastening: tighten with feel, check fit and play.
  • Forgotten or badly snapped connectors: after connecting, pull the connector lightly and perform a function test of the switch before completely reassembling the trim.
  • Impurities in the landing surface: clean before assembly so that the handle sits straight and does not squeak.

  Reasons why the part is damaged

  • Mechanical stress during frequent opening of the lid (play, cracks, broken handles).
  • Wear of the switch and contacts (irregular switching, worse response to pressure).
  • Ingress of moisture and dirt into the area of the handle and switch, which accelerates the corrosion of the contacts and deteriorates the function.
  • Damage during handling (improper closing, impact, improper disassembly).
  ]]> https://www.usedpartsvendor.com/body/rear-door-handles/207-rear-door-handles/handle-ktp-peugeot-207-sw-8742r1/ Fri, 11 Jul 2025 02:00:50 +0000 https://www.usedpartsvendor.com/uncategorized/handle-ktp-peugeot-207-sw-8742r1/ Product Overview

  This Tailgate Handle is designed specifically for the Peugeot 207 SW, featuring product code 8742R1. It integrates a switch mechanism that enables easy opening of both the rear door and the rear window, improving overall convenience when accessing the vehicle’s cargo space.

  The handle is finished in a stylish Grey Shark color (KTP), adding an attractive aesthetic touch while maintaining functionality. Although this is a used part and shows normal signs of wear, it remains fully operational and ready for immediate installation.

  Technical Information

  • Manufacturer: PSA Citroen Peugeot
  • Model: Peugeot 207 SW
  • Product Codes: 8742R1
  • Additional Numbers: KTP

  Installation and Maintenance

  Replacing the tailgate handle is a straightforward process that can be handled by experienced mechanics or skilled DIY enthusiasts. This component plays a critical role in the proper functioning of the rear doors. Regular inspection helps prevent issues related to door closure or opening.

  Ensuring correct installation will not only enhance the ease of opening the rear hatch and window but also contribute to the vehicle’s overall visual appeal thanks to its refined color and design. It is an ideal replacement for those seeking both performance and style.

  Durability and Performance

  While used, this handle has been carefully checked to ensure reliable operation. It typically endures long service life but may eventually need replacement due to wear on the switch mechanism or physical damage from regular use. Investing in this part offers a cost-efficient solution with high-quality standards.

  Don’t waste time searching for a new part when this reliable, functional tailgate handle can meet your needs and restore your Peugeot 207 SW to full convenience and style.

  ]]> https://www.usedpartsvendor.com/body/rear-door-handles/207-rear-door-handles/ewp-peugeot-207-sw-8742r2/ Thu, 19 Jun 2025 02:09:09 +0000 https://www.usedpartsvendor.com/uncategorized/ewp-peugeot-207-sw-8742r2/ The Rear Tailgate Handle for Peugeot 207 with EWP finish is a reliable replacement part designed to restore convenience and functionality to your vehicle. Featuring a built-in switch for opening the rear tailgate, this handle enhances ease of use and integrates perfectly with the vehicle’s design thanks to its white Banquise paint color.

  Although this is a used part, it remains fully operational with only minor signs of previous use that do not affect its performance or durability. It is an excellent choice for mechanics and car enthusiasts who prefer quality components at an affordable price.

  Technical Information

  • Manufacturer: Citroen Peugeot
  • Model: Peugeot 207
  • Product Codes: 8742R2
  • Additional Numbers: Not Available

  This product is specifically made for the Peugeot 207 model. Installation is straightforward, making it suitable for both professional garages and DIY car repairs. The rear tailgate handle plays a crucial role in the proper function of the rear door system, and replacing it when worn out ensures continued ease of access and security of the tailgate.

  Buying this part supports sustainability by extending the life cycle of automotive components while maintaining the vehicle’s original quality. Restore your Peugeot’s rear access with this authentic handle, an outstanding option for any Peugeot 207 owner seeking dependable and efficient automotive parts.

  ]]> https://www.usedpartsvendor.com/body/rear-door-handles/207-rear-door-handles/handle-peugeot-308-kombi-ktpd-1608481780-2/ Tue, 31 Dec 2024 03:10:30 +0000 https://www.usedpartsvendor.com/uncategorized/handle-peugeot-308-kombi-ktpd-1608481780-2/ Product Overview

  This rear tailgate handle is designed specifically for the Peugeot 308 SW (station wagon) and includes an integrated switch for easy opening of the rear tailgate. Finished in Shark Gray paint (KTP), it ensures perfect visual harmony with your vehicle’s exterior while upgrading the functionality of your rear door.

  If you need to replace a damaged or worn rear tailgate handle on your Peugeot 308 SW, this high-quality component offers an ideal solution. The integrated switch enhances the convenience of accessing the boot, especially useful for daily use or when carrying cargo. This part maintains the original equipment fitment and durability standards expected from PSA-approved components.

  Technical Information

  Manufacturer: PSA Citroën Peugeot
  Model: Peugeot 308 SW (Station Wagon)
  Product Codes: KTPD 1608481780
  Additional Numbers: Not Available

  Usage and Maintenance

  Exterior door handles, including rear tailgate handles, are frequently exposed to environmental elements such as moisture, dirt, and mechanical wear, which can cause them to deteriorate over time. Checking these components regularly ensures optimal functionality and prevents inconveniences while operating your vehicle’s rear door.

  Installation is straightforward and can be performed by experienced DIY mechanics or professional technicians. Proper alignment and connection of the integrated opening switch are essential to guarantee reliable operation. Replacement intervals depend on usage intensity and external conditions but generally align with typical wear parts maintenance schedules.

  Advantages

  • Exact fit for Peugeot 308 SW ensuring a seamless match with existing components.
  • Durable construction designed to withstand regular use and external conditions.
  • Integrated switch simplifies rear tailgate operation, improving user convenience.
  • Shark Gray finish provides excellent aesthetic integration with vehicle paintwork.

  Why Choose This Part?

  Purchasing this rear tailgate handle ensures you maintain your Peugeot 308 SW in optimal condition, preserving its original style and functionality. Suitable for both professional workshops and car owners performing self-maintenance, this replacement part guarantees compatibility and reliability. Invest in quality components that support vehicle longevity and safety during everyday driving.

  ]]> https://www.usedpartsvendor.com/body/rear-door-handles/207-rear-door-handles/handle-peugeot-207-hatchback-kgzd-8742l0/ Sat, 12 Oct 2024 02:09:11 +0000 https://www.usedpartsvendor.com/uncategorized/handle-peugeot-207-hatchback-kgzd-8742l0/ Handle for the trunk lid of Peugeot 207 Hatchback
  With switch for opening the trunk
  COLOR KGZ – INARI BLUE

  Looking for a replacement part for your Peugeot 207 hatchback? We offer a high-quality used handle that is the perfect solution for replacing a damaged or non-functional original part. This handle not only ensures convenient opening and closing of the trunk lid but also aesthetically enhances the look of your vehicle with its INARI blue color (KGZ).

  The handle is equipped with an integrated switch that allows for easy trunk opening without the need for a key. This adds increased convenience when handling the vehicle, especially during frequent loading and unloading of luggage. Besides comfort, this handle also serves as a safety feature, allowing for quick opening of the lid when necessary.

  Technical Information
  Manufacturer: PSA CITROEN PEUGEOT
  Model: Peugeot 207 Hatchback
  Product Codes: KGZD 8742L0
  Other Numbers: COLOR KGZ – INARI BLUE

  This part is ideal for mechanics and people who repair their cars themselves. With its specifications and OEM number, it is easy to verify compatibility with your vehicle model, ensuring a seamless installation. Excellent condition and functionality of the part guarantee reliability and long-lasting use.

  Keep your Peugeot 207 in top condition with our high-quality used auto parts. Order the trunk lid handle today and enjoy the combination of functionality, aesthetics, and safety on your vehicle.

  ]]> https://www.usedpartsvendor.com/body/rear-door-handles/207-rear-door-handles/handle-peugeot-207-hatchback-kthb-8742l0/ Wed, 31 Jul 2024 04:11:03 +0000 https://www.usedpartsvendor.com/uncategorized/handle-peugeot-207-hatchback-kthb-8742l0/ Enhance your Peugeot 207 with this Rear Door Handle, designed specifically for hatchback models. This used part comes with typical signs of wear, such as minor scratches, yet remains fully functional and ready for installation.

  The handle features an integrated switch for convenient rear door opening, adding comfort and practicality to your daily use. Finished in the stylish Thorium Grey (KTH) color, it provides an aesthetically pleasing look for your vehicle, despite being a used part. This particular model is perfect for Peugeot 207 owners and repairers seeking an affordable solution to replace or repair their vehicle’s rear section.

  Technical Information:
  Manufacturer: PSA Citroen Peugeot
  Model: Peugeot 207 Hatchback
  Product Codes: KTHB 8742L0
  Additional Numbers: Color Thorium Grey

  This part is very easy to replace, suitable for both professional mechanics and experienced DIYers. The handle is directly designed for Peugeot 207 models, ensuring a perfect fit without the need for further modifications. Replacement may be necessary in cases of damage to the original handle or as part of routine vehicle maintenance.

  Seize the opportunity to restore the functionality and appearance of your vehicle’s rear doors with this quality and affordable auto part. Don’t hesitate to add the Peugeot 207 Hatchback Handle to your cart today!

  ]]> https://www.usedpartsvendor.com/body/rear-door-handles/207-rear-door-handles/handle-kknb-peugeot-207-sw-8742r2/ Fri, 14 Jul 2023 04:02:44 +0000 https://www.usedpartsvendor.com/uncategorized/handle-kknb-peugeot-207-sw-8742r2/ The KKNB Handle for the Peugeot 207 is an essential component for your vehicle’s rear door, equipped with a convenient switch that facilitates easy access to the rear trunk area. This handle is designed specifically for Peugeot 207 SW models, ensuring a perfect fit and seamless integration into your vehicle’s design.

  The item comes in a striking Red Aden color (KKN) and is a used part, which may show some signs of wear, yet it remains fully functional and ready to enhance your vehicle’s accessibility. Over time, door handles can wear out due to regular use, making this replacement necessary for maintaining your vehicle’s functionality and aesthetic appeal.

  Technical Information

  • Manufacturer: PSA CITROEN PEUGEOT
  • Model: Peugeot 207 SW
  • Product Codes: 8742R2
  • Other Numbers: KKNB
  ]]> https://www.usedpartsvendor.com/body/rear-door-handles/207-rear-door-handles/handle-peugeot-207-hatchback-etsc-8742l0/ Sat, 08 Jul 2023 04:05:47 +0000 https://www.usedpartsvendor.com/uncategorized/handle-peugeot-207-hatchback-etsc-8742l0/ Enhance the functionality and aesthetic of your Peugeot 207 Hatchback with the Handle ETSC 8742L0. This quality part is specifically designed for the rear hatch door and includes a switch for easy rear hatch opening, ensuring convenience during use.

  Featuring a sleek ETS – Grey Cendre finish, this handle not only looks great but is also built to withstand the rigors of everyday use. Over time, door handles may fail due to wear and tear, exposure to elements, or accidental damage, making timely replacement essential for maintaining the functionality of your vehicle.

  Technical Information

  • Manufacturer: PSA
  • Model: Peugeot 207 Hatchback
  • Product Codes: ETSC 8742L0
  • Other Numbers: 8742L0

  Replacing the handle is straightforward for those with basic mechanical skills: simply remove the old handle using standard tools and install the new one following the manufacturer’s guidance. Ensure proper alignment and functionality after installation for optimal performance.

  ]]>