Premium used left front Xenon headlight assembly designed for Citroën C8 and compatible with Peugeot 807 models. This full unit includes the HID bulb and the ballast/control unit, offering a direct replacement for damaged or worn original equipment. The assembly is ideal for professional mechanics and experienced DIYers looking for a reliable, ready-to-fit headlight that restores factory-level illumination and beam pattern.

Technical Information

• Manufacturer: Citroën (Stellantis)
• Model: Citroën C8 (fits also Peugeot 807)
• Product Codes: 1494320080, 89006373, 620816
• Other Numbers: NFP (reference from seller listing)

Compatibility

Fits Citroën C8 and Peugeot 807 models (common production years 2002–2014). Always compare the part numbers above with your original part to ensure correct fitment.

Installation Procedure

1. Disconnect the negative battery terminal before starting work to avoid electrical damage and airbag/vehicle electronics faults.
2. Open the bonnet and, if necessary, remove the bumper or trim pieces to access the headlamp mounting points (depending on vehicle variant).
3. Unscrew the headlamp retaining bolts and carefully pull the assembly forward to access electrical connectors.
4. Disconnect the main wiring harness, the xenon ballast connector and any headlight leveling or washer connections.
5. If transferring auxiliary parts (leveling motors, washers, or brackets), remove them from the original unit and install on the replacement unit.
6. Fit the replacement unit, reconnect all connectors, and secure all fasteners to the manufacturer’s torque where specified.
7. Reconnect the battery, verify operation (ignition, headlight self-checks) and adjust headlight aim according to local regulations.

Installation Recommendation

• Wear gloves and avoid touching the xenon bulb glass surface. Finger oils shorten bulb life and can cause failure.
• Handle the ballast/control unit and its connectors with care; moisture and impact damage are common failure causes.
• After fitment, check for dashboard warning lights and clear any stored errors with diagnostic equipment if present. Proper aiming and leveling is essential for road safety and legal compliance.
• If the vehicle is equipped with adaptive lighting or automatic leveling, confirm correct operation after replacement.

Why This Part Fails Most Often

• Ballast/Control Unit Failure: The most frequent cause of xenon lighting problems—symptoms include flickering, failure to ignite, or intermittent operation.
• Bulb End-Of-Life: Xenon bulbs degrade and will eventually fail to light or produce reduced output.
• Moisture Ingress And Condensation: Leaks or cracked seals allow water into the housing, causing corrosion of connectors and electronics.
• Mechanical Damage To Mounts: Broken brackets or impact damage misalign the unit or prevent secure mounting (note: this unit is missing the lower bracket at the control unit).
• Electrical Connector Corrosion Or Wiring Damage: Poor contacts can produce intermittent faults or complete loss of function.

Notes For Professionals And DIYers

This is a used, fully functional complete Xenon headlamp assembly. The lower bracket near the control unit is missing and may require repair or bracket transfer during installation. Verify mounting points and connectors visually before installation. If you are uncertain about handling high-voltage Xenon systems or headlight leveling/adaptive functions, consult a professional technician.

Searchable reference numbers: 1494320080, 89006373, 620816. Exact item as shown in the real photos will be supplied.

Used OEM Xenon headlight ideal for mechanics and experienced DIYers who need a reliable replacement unit for Citroën C8 (and compatible platforms). This complete assembly includes the Xenon bulb and its control/ballast, providing a fast, cost-effective solution compared with sourcing individual components. The unit is sold as shown in the photos and is ready to install assuming standard vehicle connector compatibility.

Technical Information

• Manufacturer: Stellantis / Citroën
• Model: Citroën C8
• Product Codes: 1494319080, 89006372, 620616
• Other Numbers: NFP

Compatibility

Primarily for Citroën C8. May also fit related Stellantis models that share the same front light assembly (for example Peugeot 807 platform equivalents). Verify connector type and mounting points visually against your vehicle before installation.

Installation Recommendations

• Disconnect the vehicle battery before starting any work to avoid electrical shorts.
• Remove trim and fasteners securing the bumper or inner wheel arch to access the headlamp as required for your model.
• Unplug all electrical connectors (ballast/power, leveling motor, indicator) and remove mounting bolts. Support the lamp during removal to prevent damage.
• Handle the Xenon bulb and ballast carefully: do not touch the bulb glass with bare hands and avoid exposing connectors to moisture.
• Fit the assembly, secure mounting bolts, reconnect connectors and check that headlamp leveling and washers (if present) are connected correctly.
• After installation, switch on lights and perform headlamp aim and function check; adjust alignment to manufacturer specifications.
• If the vehicle has adaptive leveling or advanced headlamp electronics, follow manufacturer procedures for initialization where applicable.

Why This Part Most Often Fails

Xenon headlamps commonly fail due to bulb wear (end of life after several thousand hours), ballast/control unit failure from heat or electrical stress, or moisture ingress causing corrosion of connectors. Mechanical damage from impacts or degraded plastic mounting tabs caused by age and vibration is also frequent. In this particular unit one mounting tab is cracked but it does not affect secure installation.

Notes For Workshop And DIY

• Recommended For: Professional fitters and experienced DIYers familiar with high-voltage Xenon systems.
• Safety: Ballast contains high-voltage components—ensure power is isolated before handling.
• Testing: Verify low and high beam function, leveling operation and headlamp washers (if fitted) after reassembly.

Original front left headlight for Peugeot 807 – driver’s side (CZ/LHD). Used part in good condition: dish not illuminated, all brackets and mounts in order, ready to install. An ideal replacement for a broken or fogged reflector, suitable for auto mechanics and home repairs.

Key benefits
– Original design for precise fit and correct light trail
– Left side = in front of the driver (LHD)
– Unilluminated optics, holders without damage
– Frequent compatibility across the Eurovan platform (see compatibility by part numbers)

Part numbers (for easy tracking and verification)
– PSA/OE: 6208.F1 (6208F1)
– 1400964380
– 89901574
You can often find the listed codes directly on the headlight body; always check compatibility with the part number on your original light.

Compatibility
– Peugeot 807 (approx. 2002–2014), front left headlight
– In many cases it also fits related models Citroën C8, Fiat Ulysse and Lancia Phedra, if the OE number matches (different trims may have different lights – halogen/xenon, with/without automatic tilt).

Technical information
– Location: front left (driver)
– Type: by part number; verify the version (halogen/xenon) according to your car and original light
– Height adjustment: electric – presence of motor and lids follow photos and description
– Light bulbs: not included as standard; bulb types differ depending on the version (usually H7/H1 + PY21W + W5W for halogen)
– Connector: identical to the original (plug & play for the respective version)

Condition and packaging
– Used, fully functional part, no cracks in the body, no broken brackets
– Optics may have small operational micro-scratches corresponding to age, does not affect function
– Supplied as shown in photos; bulbs and caps only if they are clearly indicated in the photos

Assembly tips
– Before ordering, compare the OE number and connector shape with your original headlight
– After assembly, we recommend adjusting the headlights according to the regulations
– For versions with electric tilting, check the function of the motor and the connectors

Looking for the right headlight to match? Put “Peugeot 807 right headlight” or the OE code corresponding to the right side into the search.

Search keywords: Peugeot 807 front left headlight, 807 left lamp, OE 6208.F1, 1400964380, 89901574, Citroen C8 headlight, Fiat Ulysse, Lancia Phedra.

Front right headlight for Peugeot 807 (pre-facelift, approx. 2002-2004) with OEM numbers 6206.F1 and 1400964280. This is a genuine used PSA part – an ideal choice if you want to keep the correct headlight geometry and light quality as factory. The lamp is unlit and has all the brackets in order, ready for immediate assembly.

Why choose this part?
– Original PSA – precise fit and optics compared to cheap aftermarket ones
– Complete and undamaged mounts – easy assembly without gluing
– Verified compatibility by part number: 6206.F1 / 6206F1 / 1400964280 89901573

Technical information
– Location: front right headlight (passenger side, LHD)
– Suitable for: Peugeot 807 before facelift until 2004 (Eurovan II platform)
– OEM/PSA numbers: 6206.F1, 6206F1, 1400964280, 89901573
– Design: halogen (without xenon, without daytime running lights)
– Bulb types (usually): low beam H7, high beam H1, turn signal PY21W, parking W5W – check according to equipment/VIN
– Tilting: preparation for electric tilting; motorcycle may not be included (verify according to photos/question)
– Homologation: E-mark (original part)
– Condition: used, unlit; plexiglass and body without cracks; normal minor signs of traffic may occur

Compatibility and Verification
– Primarily for Peugeot 807 up to 2004. Citroën C8, Fiat Ulysse and Lancia Phedra are also on the same platform – always check the compatibility of the part by part number 6206.F1 / 1400964280 or by VIN.
– If you are not sure, send the VIN and number of the old headlight – we will confirm compatibility.

Assembly and delivery
– Plug & play replacement for the original piece
– We check the functional condition before shipping; careful packaging against damage during transport

Search Terms (SEO)
– Front right light Peugeot 807 6206F1
– Peugeot 807 right headlight 1400964280
– Original lamp right Peugeot 807 halogen

Tip: The fastest way to be sure of the correct part is to compare your part number with 6206.F1 / 1400964280.

Looking for a reliable right headlight for your Peugeot 807? We offer original used headlights that ensure perfect functionality and compatibility. This particular part is ideal for replacing the damaged or worn light and is ready for immediate installation.

Give your vehicle quality components that will increase its safety and aesthetic value. Our light on the passenger side will give your Peugeot 807 full functionality and safety needed for the night ride and poor weather conditions.

Technical information

• Manufacturer: PSA Citroen Peugeot
• Model: Peugeot 807
• product codes: 630397
• Other numbers: headlight Party of the passenger

This original part of the Citroen Peugeot PSA is specifically designed for the Peugeot 807, which ensures trouble -free compatibility and installation. Thanks to accurate technical processing and high quality of the materials used, our true headlight provides exceptional durability and long -term reliability. Let your car shine again with original parts to ensure its safe and smooth operation.

original front left light in the bumper for Peugeot 807. Ideal replacement for damaged or oxidized piece – retain the original appearance of the car and the right light function. Thanks to OEM design sits dimensions, handles and connector exactly like production, assembly is so fast and without modifications.

This part fulfills an important safety function: improves the visibility of the car for other traffic participants and helps you to better see the road under impaired conditions. For lights in the bumper, glass from stones often bursts, humidity and corrosion of the reflector – replacement is a common service and a quick path to full functionality and better appearance of the front of the car.

assembly usually does not require the dismantling of the entire bumper; Depending on the equipment of the car is accessible from below or via the wheel arches. Before assembly, we recommend comparing the shape of the body body, placing the locking points and the type of electric connector with your original work. After installation check the settings and slope of the light beam according to the regulations.

Technical information

• Manufacturer: PSA (Peugeot/Citroën) – Original part
• Model: Peugeot 807, front left side (for driver), bumper light
• product codes: 630398
• Additional numbers: 6303 98 (alternative PSA)

This is an older part used. Počítejte s drobnými estetickými stopami běžného provozu, které nemají vliv na funkci. Always verify the part number and compare the design with the original light on your car to be sure.

Restore the functionality and appearance of your Citroën C8 with this genuine left rear tail light. This essential component not only guarantees proper signaling and visibility on the road but also enhances your vehicle’s design. Specifically made for Citroën C8 models starting from 2006, this part is an ideal choice for maintenance, repair, or replacement after damage or during routine servicing.

This tail light stands out for its easy installation and quality manufacturing in line with Citroën’s original specifications. Although previously used, it has been carefully inspected and is fully operational. Please note the option to purchase the bulb harness separately, providing a complete solution for quick and efficient replacement.

Technical Information

• Manufacturer: Citroën
• Model: C8
• Product Codes: 6350CZ
• Additional Numbers: Inspection and further specifications available upon request

Choose this genuine automotive part for your Citroën C8 to ensure safety and comfort while driving, as well as preserving the authentic appearance of your vehicle. This component is crucial for the correct operation of rear signaling and lighting systems, significantly contributing to overall vehicle safety on the road.

Quality assurance and long-term customer satisfaction are our top priorities; therefore, all offered parts undergo thorough inspection. Investing in quality used automotive parts allows you to save significantly without compromising requirements for quality and safety.

This third brake light (central high‑mount stop lamp) is intended as a direct replacement for Citroën C8 and Peugeot 807 vehicles. It restores the rear high‑level brake signal visibility, ensuring safer braking indication to following traffic. Commonly sought under OE numbers 1401159980, 1489380080 or reference 6350CS, the unit is suitable for professional garages and DIY enthusiasts who need a reliable, installable spare part.

Technical Information

• Manufacturer: Stellantis (Citroën / Peugeot)
• Model: Citroën C8, Peugeot 807
• Product Codes: 1401159980, 1489380080, 6350CS
• Additional Numbers: 1401159980 | 1489380080 | 6350CS

Function And Benefits

The central brake light provides a high‑mounted, clearly visible brake signal to improve safety during deceleration. It complements the left and right tail lamps and helps reduce rear‑end collision risk by offering an additional, eye‑level alert for drivers behind. Replacement restores OEM appearance and signal performance.

Installation Recommendations

Installation is straightforward for a competent mechanic or experienced DIYer. Typical steps:

• Open the tailgate or access cover and remove interior trim panels to reach the lamp mounting points.
• Disconnect the electrical connector and unfasten mounting screws or clips holding the lamp assembly.
• Carefully remove the old unit, clean the mounting area and connectors, then fit the new lamp in reverse order.
• Ensure the connector is fully engaged and seals are intact; use a small amount of dielectric grease on the terminals if available to prevent corrosion.
• Check lamp operation with the ignition/brake pedal and verify correct alignment and secure mounting. Avoid overtightening plastic fasteners to prevent cracking.

Most Common Failure Reasons

Failures typically result from moisture ingress leading to corrosion or short circuits, damage to the lens or housing from impacts, degraded seals, or internal LED/bulb failure and connector corrosion. Vibration and aging of electrical contacts can also cause intermittent operation. Regular inspection of seals and connectors during rear‑lamp maintenance reduces the chance of unexpected failure.

This tail light enhances your vehicle’s visibility during nighttime and low-light conditions, directly contributing to road safety for you and other drivers. Maintaining fully operational rear lights is critical, and replacing damaged or malfunctioning units is straightforward with this part, making it especially suitable for professional mechanics and DIY car repair enthusiasts.

The assembly with bulbs can be purchased separately, offering flexibility for specific needs during installation. This ensures you can tailor the replacement to your vehicle’s current setup without unnecessary extra costs.

Technical Information

• Manufacturer: Citroën
• Model: C8
• Product Codes: 6351CZ
• Additional Numbers: Not available

Specifically designed for the Citroën C8 model from 2006 onwards, this tail light fits seamlessly on the passenger side without requiring major modifications. Its compatibility and ease of installation make it a practical and efficient choice for restoring your vehicle’s lighting system.

By selecting this durable used tail light, you not only reduce your expenses compared to buying new parts but also support sustainability by giving high-quality components a second life. Add this product to your cart today to ensure safe, effective operation of your Citroën C8.

Looking for a reliable part for maintaining your Citroën C8? The Washer Jet with Cover for the Right Light ensures efficient and lasting functionality of your headlight. This component is essential for maintaining good visibility in all weather conditions, thereby contributing to your driving safety.

Compatible with the Citroën C8 model, the washer jet is ideal for replacing worn or damaged parts. This specific piece is perfectly manufactured for the right headlight and is offered in the sand bivouac color, matching the original specifications of the manufacturer.

Technical Information

• Manufacturer: PSA Citroën Peugeot
• Model: Citroën C8
• Product Codes: 6438K3, 6438K7
• Additional Numbers: KDD

With precise workmanship and the use of durable materials, the washer jet with cover is exceptionally resistant to normal wear and guarantees long-term reliability. Installation of this part is straightforward, making it ideal for independent mechanics or those who prefer to make repairs themselves. It’s a great choice for keeping your vehicle in top condition.