This replacement bulb socket assembly is intended for the right outer rear lamp of the Citroën C4 II (B7) second generation. Designed for professional mechanics and competent DIYers, the part restores reliable electrical contact for tail, brake and turn signal functions and is frequently searched by part number 6351KS. The unit includes the bulb holders and a short length of wiring for straightforward plug-in replacement.

Technical Information

• Manufacturer: Stellantis / Citroën / Peugeot
• Model: Citroën C4 II (B7) Second Generation
• Product Codes: 6351KS
• Other Numbers: None Provided

Function And Benefits

The socket assembly secures the rear lamp bulbs in the right outer tail lamp cluster and provides the electrical connections for lighting circuits (tail, brake, indicator and possibly reverse depending on lamp configuration). A healthy socket ensures solid contact, correct lamp operation and minimises intermittent faults caused by loose or corroded contacts. Installing a fresh socket reduces the risk of flickering lights, poor lamp contact and heat-related failures.

Installation Recommendations

1. Safety First: Disconnect the negative battery terminal before working on the rear lighting harness to avoid short circuits.
2. Access: Open the boot and remove any trim panels or covers to reach the rear lamp cluster. Remove lamp cluster fasteners and carefully extract the lamp unit from the body aperture.
3. Disconnect: Unplug the original wiring connector from the lamp and remove the old bulb socket by releasing its retaining tabs or clips.
4. Fit New Socket: Insert the new socket into the lamp body until it clicks into place. Ensure the wiring is routed the same way as factory to avoid pinching.
5. Test: Reconnect the battery, test all lamp functions (tail, brake, indicator and reverse if applicable) before reassembling trims.
6. Reassembly: Secure the lamp cluster back into the vehicle, reinstall trim and confirm watertight seating of the lamp to prevent ingress.

Most Common Failure Reasons

• Corrosion And Water Ingress: Moisture and road salt lead to oxidised contacts and poor conductivity.
• Heat And Thermal Cycling: Repeated heating of bulbs and cooling causes plastic to become brittle and contact points to loosen.
• Vibration And Mechanical Stress: Road vibration and repeated removal/installation can break retaining tabs or damage wiring.
• Poor Contact Or Loose Connections: Worn contacts create intermittent operation, flicker or increased resistance and local heating.

Signs that this socket needs replacing include intermittent lamp operation, one lamp function not working while others do, visible corrosion at contacts or melted/deformed plastic around the socket. In everyday use, sockets often fail after many years—commonly observed on vehicles older than 8–12 years or in regions with heavy road salt or frequent moisture exposure.

This part is intended for direct replacement of the right outer rear lamp socket on compatible Citroën C4 II vehicles. Customers commonly search using the part code 6351KS when looking for this exact component.

Decorative Trim For Right Rear Taillight Designed For Citroën C4 II. This OE-fit exterior trim piece (product codes 9672155480 / 7453E4) restores the factory look of the right rear lamp assembly and is intended for workshops and experienced DIYers who want a precise cosmetic replacement. The part is commonly searched by its product number, so you will find fast identification and fitment when ordering by code.

Key Benefits

Restores Original Appearance: Matches factory styling and finish to eliminate scratches, cracks or missing trim around the right rear light. Durable Fitment: Manufactured to the same mounting points as the original, ensuring a secure and flush installation.Ideal For Body Shops And DIY Repairs: Easy to source by part number and straightforward to replace with common tools.

Installation Recommendations

Before starting, inspect the taillight clips and surrounding bodywork. Typical replacement requires access from the trunk/boot area to reach fasteners and clips. Follow these general steps:

• Open boot and remove any trim panels covering the taillight fixing points.
• Unscrew or unclip the taillight assembly fasteners (keep fasteners and clips organized for reuse if undamaged).
• Carefully withdraw the taillight to expose the decorative trim. Use a plastic trim tool to avoid scratching paint and breaking clips.
• Remove the damaged trim from the taillight or body by releasing retaining clips; replace with the new trim and press into place until clips engage.
• Reinstall the taillight assembly, secure all fasteners, and check alignment and sealing.

Recommended Tools: Trim removal tools (plastic), Phillips or Torx drivers depending on vehicle fasteners, soft gloves, and a flashlight. Typical Replacement Time: Approximately 20–45 minutes depending on skill level and access.

Why The Part Fails Most Often

• Impact Damage: Rear-end contact or minor parking collisions commonly crack or deform the trim.
• Broken Clips: Repeated removals or brittle clips (often worsened by cold or aging) cause poor retention and rattles.
• Surface Wear: Scratches, stone chips and UV exposure can dull or fade the finish, prompting cosmetic replacement.

Technical Information

• Manufacturer: Stellantis (Citroën/Peugeot)
• Model: Citroën C4 II
• Product Codes: 9672155480, 7453E4
• Additional Numbers: 74530000, 7453E4, 9672155480

Notes For Buyers

Search By Part Number: This item is frequently ordered using the product code—adding the code to your search speeds up identification. When removing the old trim, inspect plastic clips and replace any that are damaged to ensure a secure refit. Avoid using excessive force during installation to prevent cracking the new trim or surrounding panels.

This replacement socket assembly with bulbs is intended for the left outer rear tail light of the Citroën C4 II (second generation). Designed for both professional workshops and DIY enthusiasts, the unit provides a direct-fit solution to restore tail light function quickly. The delivered short length of wiring simplifies installation and reduces the need for additional splicing or adapters, making it a practical choice when the original holder or connector is damaged.

Technical Information

• Manufacturer: Stellantis / Citroën
• Model: Citroën C4 II (Second Generation, C4 B7)
• Product Codes: 6350KS
• Other Numbers: N/A

Installation Recommendations

Replacement is straightforward for a competent mechanic or a capable DIYer. Typical steps:

1. Open the boot and remove the interior trim to access the rear lamp housing.
2. Unscrew or unclip the lamp housing from the body and pull it out enough to reach the socket.
3. Unplug the old socket from the lamp unit, cut any tape if necessary, and remove the damaged holder.
4. Fit the new socket assembly into the lamp, connect the wiring, and ensure a secure electrical connection.
5. Check the lamp seal and position the housing back into place; reattach clips or screws and reinstall trim.
6. Test all rear light functions (tail, brake, indicator, reverse if applicable) before finishing.

Recommended tools and tips: flat and Phillips screwdrivers, plastic trim removal tool, pliers, and dielectric grease for the contacts to prevent corrosion. Avoid excessive force on plastic tabs; ensure the lamp gasket is clean to maintain watertightness.

Why It Fails Most Often

• Corrosion and Water Ingress: Moisture entering the lamp or worn gaskets causes corrosion of contacts and short circuits.
• Heat and Vibration: Thermal cycling and road vibration make plastic holders brittle and can break contact points or wiring.
• Mechanical Damage: Impact to the lamp or improper removal/installation can crack the socket or damage pins.
• Electrical Overload or Poor Contact: Loose contacts or arcing from poor connections can burn the socket terminals.

Regular inspection after moisture exposure and replacing a damaged socket promptly restores reliable rear lighting and prevents further damage to the lamp harness. Use the part number 6350KS when searching to find the correct replacement quickly.

This right rear outer tail light is a direct-fit replacement for the Citroën C4 II (second generation). Ideal for professional garages and experienced DIY mechanics, the unit restores rear lighting functions and exterior appearance after collision damage, cracking or moisture ingress. The assembly is commonly searched by part numbers 9687311980 and 6351KS, so listing these codes in your search will help you find the exact match faster. Note: The lamp is supplied without the bulb holder and bulbs.

Technical Information

• Manufacturer: Stellantis / Citroën
• Model: Citroën C4 II (B7) – Second Generation
• Product Codes: 9687311980
• Additional Numbers: 6351KS
• Position: Right, Outer Rear Lamp (Passenger Side on Left-Hand-Drive Vehicles)
• Supply Scope: Lamp housing only — bulb holder and bulbs not included

Installation Recommendations

Replacement is straightforward for a competent mechanic or experienced DIYer. Typical steps: open the boot and remove the inner trim to access the lamp fasteners; undo the securing screws or nuts; carefully pull the lamp assembly outward, unplug the electrical connector and remove the old unit. Fit the new lamp by reversing the procedure: connect the wiring harness, check the seal and alignment, secure fasteners to hand-tight plus a small additional turn (avoid overtightening), reinstall the trim and test all light functions (position, brake, indicator). Always disconnect the battery or ensure ignition is off when handling electrical connectors. Replace bulbs and holders separately if required and verify correct bulb types from the vehicle manual before installation.

Why This Part Fails Most Often

• Impact Damage: Rear collisions or parking knocks commonly crack the lens or damage mounting tabs.
• Moisture Ingress: Worn seals or cracked housings allow water entry, causing corrosion of sockets and connectors.
• Connector And Socket Corrosion: Oxidation of terminals or bulb holders leads to intermittent or lost function.
• Mechanical Wear: Plastic clips and mounting points can become brittle with age and break during removal or from vibration.

Choosing the correct replacement by part number (for example 9687311980 or 6351KS) ensures fitment and reduces installation time. Regular visual inspection of seals and connectors helps prevent failures caused by moisture and corrosion.

This genuine OE third brake light (center high‑mount stop lamp) is a direct replacement for a range of Citroën models and is commonly searched for by its part numbers. It restores correct signalling and visibility at the rear of the vehicle, improving safety and ensuring compliance with road regulations. Ideal For Professional Mechanics And Enthusiast DIYers Who Need A Reliable, Plug‑In Replacement Part.

Key Benefits

Direct Fit For Specified Models: Designed To Match The Original Mounting Points And Connector Types, Reducing Installation Time. Clear Identification By OEM And Alternative Part Numbers Makes This Product Easy To Find In Catalogs And Search Engines. Durable Construction: Built To OEM Standards With Proper Sealing To Resist Road Vibration And Typical Environmental Exposure.

How It Works And When To Replace

The Third Brake Light Houses LEDs/Light Elements And Serves As A Center High‑Mount Stop Lamp (CHMSL), Providing An Additional Brake Signal Visible To Vehicles Behind. It Should Be Replaced If The Light Fails To Illuminate, If The Lens Is Cracked Or Distorted, Or If There Is Evident Water Ingress Or Corrosion At The Connector. Always Inspect The Supply Cable And Connector Before Replacing The Lamp—A Faulty Wiring Harness Or Damaged Connector Can Cause A New Unit To Appear Defective.

How To Replace (Typical Procedure)

• Park The Vehicle On A Level Surface And Disconnect The Battery Before Starting Work.
• Access The Lamp From Inside The Tailgate/Rear Hatch By Removing Interior Trim Panels Or Fasteners.
• Disconnect The Electrical Connector And Remove Securing Screws Or Clips Holding The Lamp To The Tailgate.
• Swap The Old Lamp For The New Unit, Reconnect The Electrical Connector, Seal Any Grommets If Needed, And Refit Interior Trim.
• Reconnect The Battery And Verify Full Function Of Brake Lights (Brake Pedal Depressed And Handbrake/Lighting Checks Where Applicable).

Technical Information

• Manufacturer: Stellantis (Citroën / Peugeot)
• Model: Citroën C4, Citroën C4 Cactus, DS4, Citroën C5 X7 (Select Generations/Body Types As Listed)
• Product Codes: 9689043280, 89093324, 89093538
• Other Numbers: 6350V2, 6351HH, 6351EY, 9688835380 (Reference / Cross Numbers)

Installation Recommendations

Always Disconnect The Battery Before Removing Or Installing The Lamp To Prevent Short Circuits And Protect Vehicle Electronics. Check The Condition Of The Supply Cable, Connector Pins, And Grommets; Clean Corroded Contacts Or Replace Damaged Wiring. Use Correct Torque On Fasteners And Ensure The Lamp Sits Flush To The Tailgate To Maintain Sealing Against Moisture. After Fitting, Test The Brake Light Function With An Assistant Or Use A Diagnostic Light Tool.

Why This Part Commonly Fails

Typical Causes Of Failure Include Water Ingress Through A Damaged Lens Seal Or Gasket, Corrosion Or Oxidation Of The Electrical Connector, Impact Damage To The Lens Or Housing, And Internal LED Or Circuit Board Failures Due To Vibration Or Thermal Stress. In Many Cases, The Underlying Cause Is A Compromised Wiring Harness Rather Than The Lamp Itself—Inspect Wiring Before Replacing The Unit.

Part Numbers And Clear Model References Improve Searchability In Online Stores And Spare‑parts Catalogs—If You Regularly Search By OEM Code, Use Any Of The Numbers Listed Above To Locate This Exact Fitment.

Product Description

This centre high-mount stop lamp (third brake light) is a direct-fit replacement unit designed for Citroën passenger cars listed below. It restores rear signalling visibility and brake light compliance, improving safety during braking and reducing the risk of rear-end collisions. The unit matches original Stellantis mounting points and electrical connector layout for straightforward replacement.

Compatibility

Compatible Models: Citroën C4 I, Citroën C4 II, Citroën C4 Cactus, Citroën DS4, Citroën C5 X7. Always check the part numbers against your vehicle equipment level and production year to ensure correct fitment.

How To Replace

Replacement is suitable for experienced DIYers and professional garages. General procedure: remove interior tailgate/boot trim to access the lamp assembly, undo retaining screws or fasteners, disconnect the electrical connector, remove the old lamp and clean the mounting area, fit the new lamp and secure with original fasteners, reconnect the wiring and test all light functions (brake, tail, and any integrated LED functions). Ensure sealing surfaces are clean to prevent water ingress. Before starting, disconnect the vehicle battery to avoid short circuits or electrical damage.

Most Common Failure Reasons

Typical causes of failure include water ingress and corrosion of contacts, damaged supply cable or connector, mechanical impact to the rear hatch, and internal LED or filament failure. Wiring abrasion or poor sealing around the tailgate can accelerate failure. Regular visual inspection of the connector and seal can prevent premature issues.

Technical Information

• Manufacturer: Stellantis
• Model: Citroën C4 I / C4 II / C4 Cactus / DS4 / C5 X7
• Product Codes: 9646804580, 6350V2, 6351HH, 6351EY
• Other Numbers: 6350.V2, 6351.EY, 6351.HH

Installation Recommendations

Use original-style fasteners and avoid over-tightening to prevent cracking the housing. Check the condition of the wiring harness and replace any brittle or corroded terminals. After installation, verify operation of the brake light from inside the vehicle and with an assistant outside, and ensure the tailgate closes without pinching the cable. If unsure about access or connector condition, have the replacement performed by a professional technician.

Are you looking for a reliable ceiling light for your Citroën, Peugeot, or DS vehicle? Our ceiling light is the ideal solution for the Citroën C4 II, DS4, and Peugeot 508 models. With this original part, you gain assurance of compatibility and quality specifically designed for your vehicle.

This ceiling light features an elegant color marked by the code FBJ – LAMA, which perfectly complements your car’s interior, providing a modern look and ensuring sufficient lighting within. Given that this is a used part, each light is carefully tested to ensure its full functionality and safety during use.

Technical Information
Manufacturer: PSA
Model: Citroën C4 II, DS4, Peugeot 508
Product Codes: 96781446BJ, 6362AY
Additional Numbers: 6362AY

The installation of this ceiling light is quick and easy, allowing for replacement in just a few minutes. This part is essential for proper interior illumination of the vehicle, and we recommend regular checks and replacements in case of damage or wear. The replacement ceiling light is a key element for maintaining comfort and safety in your driving experience.

The category and tag chapter includes vehicles Citroën C4 GRAND PICASSO, C4 II in the category of Body and Lights. This part is the perfect choice for anyone looking for quality and reliable spare parts for their vehicle.

Let your car shine bright with this quality ceiling light that ensures both aesthetic and functional benefits for your vehicle. Order now and get the best for your automobile!

Are you looking for a reliable ceiling light for your Citroën, Peugeot, or DS vehicle? Our ceiling light is the perfect solution for Citroën C4 II, DS4, and Peugeot 508 models. With this original part, you can ensure compatibility and quality specifically designed for your vehicle.

This ceiling light features an elegant color marked with the code FBJ – LAMA, which perfectly complements your car’s interior, giving it a modern look and ensuring adequate illumination. As this is a used part, each light is carefully tested to ensure full functionality and safety in use.

Technical Information
Manufacturer: PSA
Model: Citroën C4 II, DS4, Peugeot 508
Product Codes: 96781446BJ, 6362AS
Additional Numbers: 6362AS

Installing this light is quick and easy, allowing for replacement in just a few minutes. This part is essential for proper interior lighting in your vehicle, and we recommend regular checks and replacement in case of damage or wear. A replacement ceiling light is a key component for maintaining comfort and safety in your driving experience.

The category and tag section includes Citroën C4 GRAND PICASSO, C4 II in the Body and Lighting category. This part is an ideal choice for anyone looking for quality and reliable spare parts for their vehicle.

Let your car shine with this quality ceiling light that offers both aesthetic and functional benefits to your vehicle. Order now and get the best for your automobile!

Are you looking for a reliable and high-quality rear light for your Citroën C4 II? We have the perfect solution with this original used auto part, ensuring that your vehicle will be back to perfect condition. This part is exactly what you need for the repair or restoration of your vehicle’s rear light.

This specific model of the right outer rear light was designed specifically for the Citroën C4 second generation, also known as the Citroën C4 B7. Its compatibility with this model ensures that installation will be smooth and hassle-free. As this is a used part, you can be assured of its origin and quality, which has been verified and assessed.

Technical Information
Manufacturer: PSA CITROEN PEUGEOT
Model: CITROËN C4 B7 Second Generation
Product Codes: 9808624380, 9808624580
Other Numbers: No additional specified numbers

It is important to note that this light comes without a socket and bulbs. This specification means that you will need the original or replacement sockets and bulbs for installation. With this information, you can effectively determine the next steps needed to get this light installed on your vehicle.

Take advantage of the opportunity to purchase a high-quality used auto part that not only ensures the safety and aesthetics of your Citroën C4 but also helps maintain the authenticity of your vehicle with original parts. This part is ready for immediate installation, reducing the time you would need to spend searching for or waiting on new parts.

Our offering includes this light socket with partial wiring, making installation easier and ensuring reliable functionality in your vehicle.

Technical Information:
Manufacturer: Citroën
Model: C4 II, Second Generation, B7 Type
Product Codes: 9808624380, 9808624580
Additional Numbers: Includes wiring for easy installation

This socket is designed for Citroën vehicles, specifically for the C4 II model. It includes the necessary components for your lighting systems, ensuring not only safety functions but also aesthetic enhancement for your vehicle. Whether you are a mechanic or enjoy fixing your car yourself, this part allows for quick and efficient replacement without requiring additional modifications to the vehicle’s electrical system.

With preserved quality and functionality, this used part is a suitable choice for anyone seeking an effective solution for restoring or repairing rear lights on their vehicle. It’s important to note that each part has been pre-approved for further use to ensure your maximum satisfaction and safety on the road.

Don’t forget that regular inspection and replacement of damaged or worn-out lights are crucial for safe driving. This socket is an excellent solution for keeping your Citroën C4 II in optimal condition. The item is ready for immediate shipping and quick use in your vehicle.