Original additional brake lamp (third brake light) for Citroën C-Crosser and Peugeot 4007. It is a part of a PSA produced with a code 6351CJ, designed for mounting to the top of the fifth door/spoilers. Compared to universal replacements, it guarantees accurate attachment, correct connector and match with the vehicle’s homologation – a reliable function and a long life.

The third brake light significantly increases the visibility of braking and thus the safety of the crew and other traffic participants. We recommend replacing for cracks of the cover, water flowing, oxidized contacts, non -functional segments or with a defect in deck diagnostics. Unsatisfactory or non -functional brake light may be a reason for unsuccessful technical inspection.

The assembly is usually straightforward: after opening the fifth door, the inner plastic lining is removed, the electric connector is disconnected, the light fastening screws are released and the unit is removed outwards. Before installing, check the sealing status of the bearing surface and possibly clean it or replace it to prevent leakage. After mounting, check the function after depressing the brake pedal.

Because it is an original part used, we recommend that you compare the number 6351CJ and the shape/connector with your original flashlight before ordering. Proper pairing according to OE code is the safest way to trouble -free assembly and full compatibility.

technical information

• Manufacturer: PSA (Citroën/Peugeot) – original part
• Model: Citroën C-Crosser (about 2007–2012), Peugeot 4007 (about 2007–2012)
• Product codes: 6351CJ, 6351.CJ
• Other numbers: 6351 CJ

Advantages of the original part: accurate geometry and attachment, proper tilting and luminosity by type, quality materials and compatibility with wiring of the car. Great choice for fast and durable repair without modifications.

Original right rear light – outer part in the fender – designed for Citroën C -Crosser cars. Ideal replacement for cracks, roasts or minor accidents. It comes without the base of the bulbs 621565, which can be purchased separately.

The part fits exactly to the original handles and retains the appearance and function of the rear lights. It is the right side (passenger side in the Czech Republic), an outer lamp located in the fender – not a part in the lid of the fifth door. For easy trace and compatibility control, 6350eG is often sought by codes.

Typical manifestations of defects include cracked glass, moisture inside and oxidized contacts, which can cause a non -functional rudder or outline. The replacement is usually fast – you can handle it with regular tools.

mounting tips:
– the approach is from the trunk after dismantling part of the upholstery; The matrix/screws holding the lamp is released, the connector disconnects and the part is removed from the body.
– Transfer the base of the bulbs and the bulbs from the old lamp, or get a new 621565 socket.
– check the seals and a bearing surface before tightening; Tighten evenly to avoid mounting.
– Test all the rear lights after assembly.

To be sure of compatibility, we recommend comparing the numbers given in the original episode or verify according to the VIN. This type of lamp is used for models from the entire C -Crosser production (about 2007–2012).

technical information

• Manufacturer: Citroën (PSA)
• Model: Citroën C -Crosser, Right rear outer lamp in the fender
• product codes: 6350eG (OE/OEM)

Left rear lamp in the fender for Citroën C -Crosser. It is a used original part of dismantling, suitable as a substitute for damaged or torn rear light. Variant in the fender (body), not in the fifth door. Supplied without the base of the bulbs – it can be purchased separately.

Thanks to the original design, it fits in size and connector exactly, preserves the original appearance and light function of the vehicle. The replacement is usually fast and does not require any modifications – just switch the existing sleeves/bulbs and connect the connector.

A typical reason for replacement in this model is a crack after less tap, root and subsequent corrosion of contacts. When installing it is recommended to check the condition of the seal and base of the bulb; In the case of damage, it is advisable to replace them with a new part 621565.

Exchange procedure in a nutshell: Open the trunk lid, remove the inner lining in the lamp area, disconnect the connector, loosen the fastening nuts/screws, and gently slide the light from the body. You can settle the new piece in the opposite order – take care of the sealing correctly and do not overlap the nuts to avoid bursting of the plastic.

technical information

• manufacturer: dog/Citroën
• Model: Citroën C -Crosser, left rear lamp in the fender (about 2007–2012)
• product codes: 6350eh, 6350.EH, 6350 Eh

Please always verify compatibility by part 6350EH and compare the shape and connector with the original lamp in your car. Using the original part you can be sure of the proper function of the rear lighting and the long life.

Right rear reflector into the rear bumper for Citroën C -Crosser with original PSA number 6340F7. The used part with precise dimensions and shape for trouble -free mounting, which restores the original appearance of the car and improves visibility at night and under impaired conditions.

Location: Right side (passenger) in the back bumper. The reflector is red, set in the bumper on plastic latches. Thanks to the accurate seating, it holds firmly and grind. Suitable as a replacement for a cracked, lost or confused piece.

When and why to change it: reflectors often leave for small taps while parking, when there is a rupture or breaking up paws. The impaired reflectivity or missing reflector can lead to unsuccessful technical inspection and reduces safety – other drivers can be harder to see the car at night.

Mounting and tips: Replacement is usually a matter of minutes. In many cases, the reflector can be carefully clicked with a plastic lever from the outside and snap into the place. Some versions may be more convenient to access from the rear after partial wheel releasing. Clean the bearing surfaces in the bumper before mounting.

What you get by this: a quick and cheap solution of visual repair, maintaining the original appearance of the C -Crossser and the certainty that the reflective light fulfills its safety function. If you are looking for 6340F7 (also 6340.F7, 6340 F7).

technical information

• Manufacturer: PSA (Citroën)
• Model: Citroën C -Crosser, First Generation (about 2007–2012)
• Product codes: 6340F7
• Other numbers: 6340.f7, 6340 F7

Verify compatibility by comparing Part 6340F7 and shape/handles with the original piece. When ordering according to VIN, you are sure of the right choice. Suitable for mechanics and home repairs – quick mounting without special tools.

ORIGINAL CABINATION OF LOBERS BULPS IN THE BLAUBLATION FOR CITROëN C – CROSSER, PSA code 621565 (NFP). It is a wiring bundle designed for the internal connection of the rear light located in the fender. The cabling is the same for the left and right side, so it fits both sides of the vehicle.

This part solves typical rear light problems, such as occasional outages, weak lighting or non -functional turn signal/outline light caused by transition resistors, contacts or damaged wires. Replacement of cabling is often the fastest and most reliable way to restore the correct function of lighting and pass the MOT without complications.

The assembly is straightforward: after the battery is disconnected, the rear lamp in the fender (access from the trunk space after removal of upholstery) is removed, the original connector is disconnected, the cable beam is replaced and the contacts and seals are checked. It is recommended to clean the skeletal points, check the condition of the bases of the bulbs and possibly use a contact spray or dielectric petrolatum to prevent corrosion. Do not bend the cabling on the sharp radius and guide it in the original mounts to avoid wire stress.

technical information
manufacturer: dog (Citroën/Peugeot), original part
Model: Citroën C -Crosser (about 2007–2012), rear lamp in the fender, left/right identical
product codes: 621565
Other numbers: 6215.65, 6215 65, NFP (finished production)

Always verify compatibility according to the Part code and by comparing the connector and cable management with your original cabling. Because it is an original dog solution, you maintain the correct connection and reliable function without the need to modify the wiring.

This is the original part used, suitable as a cost -effective replacement for no longer non -functional volume. Code 621565 is kept as NFP in the PSA, so this is an ideal choice for keeping the car in operation with the availability of OEM quality.

Original inner rear light (left side) designed for the hinged lid of the fifth door. Suitable for Citroën C -Crosser cars. Parts on the lid are used to supplement the main rear lamps in the fender and ensure proper visibility and safety in operation. Thanks to OEM quality, it fits exactly the original handles and connectors without the need for modifications.

Typical reasons for replacement are cracks after less collision, leakage and subsequent corrosion of contacts, confusion of the cover or damaged handles. If you are not dealing with the “light” defect, check the status of the base, fuses and skeletal points before installing the new lamps – the connector oxidation often manifests itself in this model.

Installation is fast and manageable even in home conditions: After opening the lid, remove the inner plastic lining, release the fastening screws of the lamp, disconnect the electric connector, transfer the bulb and the seal, set the new lamp into the guides and evenly tighten the screws. Finally, test all functions and check the seal tightness. Note: “Left” means the driver’s side in the European concept.

Technical information

• manufacturer: dog/Citroën (OE part)
• Model: Citroën C -Crosser (approx.
• Product codes: 6350ek, 6350.ek
• Other numbers: 6350 EC (writing variant)

Choose an original lamp for the correct light geometry, precise fit with the body and long life. This part is an ideal choice if you want to quickly and efficiently restore the full functionality of the rear lights without unnecessary compromises.

Original rear fogging for the bumper for Citroën C-Crosser cars. Practical solution, if the rear fog light does not work due to interrupted conductors, corroded connectors or mechanical damage to the bundle after a smaller collision. Thanks to the exact length and correct connectors, this cabling corresponds to the original design and easily fits into the original bumper handles – without the need for modifications.

The rear fog light is an important safety feature for driving for impaired visibility. This cabling ensures a reliable power supply and proper grounding to the fog light. Compared to universal solutions, the original cable bundle is the certainty of compatibility and resistance to moisture and vibrations that are common in the rear bumper area.

Typical symptoms of wiring defects include rear fog lights, occasional flashing, oxidized or relaxed connectors or visible insulation damage. The most common causes are moisture and salt in the bumper space, or the cabling voltage after a smaller impact or poor handling during previous repairs.

Installation is standard: disconnect the battery, ensure access to the rear fog (it is often necessary to partially release the lower covers or bumper), guide the bundle on the original route and fasten to clips, connect the connectors to the stop and check the seal. Test the fog function before the final composition. For longer life, we recommend treating contacts with a suitable contact petrolatum.

technical information
Manufacturer: PSA (Citroën/Peugeot)
Model: Citroën C-Crosser-Rear fogging in the bumper
Product codes: 621563
Other numbers: 6215.63; 6215 63

Before ordering, compare the part code and the shape of the connectors with the original bundle in the vehicle. If you are replacing after a crash or corrosion, check the status of the sockets and the bulb seal to make the repair complete and reliable in the long term.