This right rear fog lamp is a practical replacement part for Peugeot 407 SW estate vehicles and is commonly searched under part numbers 9646507380 and 6351T4. Supplied as a complete assembly including the socket, it is aimed at professional mechanics and experienced DIYers who need a direct-fit unit to restore rear visibility and legal compliance in poor weather. The housing and mounting points are designed to match original equipment for straightforward installation and reliable alignment.

Technical Information

• Manufacturer: Stellantis (Peugeot)
• Model: Peugeot 407 SW
• Product Codes: 9646507380, 6351T4
• Additional Numbers: 6351T4, 9646507380

Installation Recommendations

Install from the luggage compartment side by removing the interior trim panel to access the lamp housing. Remove the retaining screws or clips, unplug the electrical connector and withdraw the lamp assembly. Fit the new assembly into the mounting bracket, secure fasteners evenly to avoid stress on mounting tabs, reconnect the electrical plug and test the lamp function before refitting trim. Apply a small amount of dielectric grease to the connector pins to reduce the risk of future corrosion. If the bulb is not working on delivery, replace it with the correct bulb type and ensure the socket is clean and undamaged.

Common Failure Reasons

Rear fog lamps typically fail due to water ingress and corrosion of the contacts or socket, impact damage when reversing, cracked housings from road debris or minor collisions, or simply bulb burnout. Corroded connectors and damaged mounting tabs are frequent causes that necessitate replacement of the complete assembly rather than just the bulb.

Searchable by OE numbers 9646507380 and 6351T4, this unit is a convenient spare for workshops and owners maintaining Peugeot 407 SW vehicles. Replacing a damaged fog lamp restores rear visibility in adverse conditions and keeps the vehicle compliant with road safety regulations.

This left rear fog lamp is an OEM-style replacement for the Peugeot 407 SW, supplied complete with its bulb socket and wiring connector. Ideal for professional mechanics and competent DIY enthusiasts who search by part number (9646507480 / 6350T4). The unit restores rear fog lighting function and visibility in poor weather, improves safety compliance, and matches the original fit and mounting points for straightforward replacement.

Technical Information

• Manufacturer: Stellantis (Peugeot/Citroën)
• Model: Peugeot 407 SW
• Product Codes: 9646507480, 6350T4
• Other Numbers: 6350T4 | 9646507480

Application

Designed specifically for the left rear fog light position on Peugeot 407 SW (estate) models. Confirm location and fitment visually against the existing unit before installation.

Installation Recommendations

• Required Tools: Flat and Phillips screwdrivers, trim removal tools, 8–10 mm socket set, gloves and a clean cloth.
• Access: On many 407 SW cars the lamp is accessible either through the trunk behind an access panel or by removing the inner bumper/trim. Work on a cold car and disconnect the battery if you will be handling electrical connectors for safety.
• Procedure: Remove the trim or access cover, unplug the wiring connector, release the retaining clips or screws securing the lamp, withdraw the assembly, and replace with the new unit. Fit the socket and bulb, secure all fasteners and trim, then test the fog lamp circuit before final reassembly.
• Sealing: Check and renew any rubber seals or gaskets if they show wear to prevent moisture ingress. Ensure connector contacts are clean and free of corrosion.
• Bulb Note: Bulb operation is not guaranteed with the supplied unit; verify bulb type and condition and replace the bulb if necessary with the correct specification from the vehicle manual.

Why It Most Commonly Fails

• Moisture Ingress: Cracked lenses or degraded seals allow water to enter, causing corrosion or electrical shorting.
• Impact Damage: Rear bumper impacts or minor collisions frequently crack the lens or break mounting tabs.
• Corroded Contacts: Exposure to water and road salts can corrode the socket contacts and wiring.
• Bulb Failure: The bulb itself can burn out independently of the housing; when replacing the assembly, check the bulb separately.
• UV And Ageing: Prolonged sun exposure and age can make the plastic lens brittle and less weatherproof.

Practical Tips

• When replacing the lamp, test the electrical circuit and grounding to avoid false faults after fitting.
• Replace damaged seals and clean connectors with electrical contact cleaner for reliable long-term operation.
• Keep the part numbers 9646507480 and 6350T4 handy when searching or ordering to ensure correct fitment and faster sourcing.

This original front fog light is designed for the Peugeot 407 first generation, specifically for the passenger side. A vital component for safe driving in low visibility conditions, this fog light provides a wider and shorter beam pattern that illuminates the area directly in front of the vehicle without causing glare to the driver. It enhances both safety and vehicle aesthetics by maintaining the authentic look of your Peugeot.

Whether you are a professional mechanic or a DIY car enthusiast, this high-quality fog light ensures a perfect fit and optimal functionality. The part is in excellent condition and ready for immediate installation, making it an ideal replacement for damaged or worn-out fog lights.

Technical Information

• Manufacturer: Citroen Peugeot
• Model: Peugeot 407 First Generation
• Product Codes: 9641945480, 620636
• Additional Numbers: NFP

Fog lights are critical for improving visibility during fog, rain, or other adverse weather conditions. Over time, fog lights may require replacement due to wear or damage. Proper installation should follow manufacturer guidelines or be performed by qualified technicians to ensure safety and compliance.

Ensure your Peugeot 407 is fully equipped for all weather conditions by ordering this genuine front fog light today. Experience safer drives with enhanced road illumination designed specifically for your vehicle.

Looking for a reliable and high-quality replacement part for your Peugeot vehicle? Consider this original front fog light from a Peugeot 407. This specific fog light model is designed for the first generation of Peugeot 407 and fits the driver’s side. Its excellent condition makes it an ideal choice for replacing a damaged or non-functional fog light without the need to invest in a brand new component.

Fog lights play a crucial role in both safety and vehicle aesthetics. They not only improve visibility in poor lighting conditions but also enhance the overall appearance of your car. If your fog light is damaged, it may compromise both safety and look. Replacing the damaged fog light with this original part ensures your Peugeot 407 will look and function as intended.

Technical Information

• Manufacturer: Peugeot
• Model: Peugeot 407, First Generation
• Product Codes: 9641945680, 620836 NFP

When replacing the fog light, it is recommended to have the electrical connections professionally checked and the light properly adjusted to guarantee optimal road illumination. This part is designed specifically for installation on the driver’s side, which is critical for correct light distribution on the road and surroundings. Using an original component ensures the best compatibility and performance.

Choose this well-preserved original fog light for the Peugeot 407 and ensure your vehicle is equipped with a properly functioning and visually appealing component that enhances its look. Fix your vehicle wisely and efficiently with the confidence of original parts quality!

As an essential part of the Peugeot 407 SW Estate lighting system, this socket supports the correct operation of brake lights, indicators, and reverse lights, enhancing your vehicle’s visibility during night driving or poor weather conditions. Over time, sockets may degrade due to heat, moisture, or mechanical wear, which can cause lighting failures and increase safety risks.

Installation is straightforward: disconnect the damaged socket from the vehicle’s wiring, then connect the new socket with its integrated wiring harness into the original lamp housing. Always ensure secure connections and check the functionality of the bulbs, as their operation is not guaranteed with this part alone.

Technical Information

• Manufacturer: Citroen Peugeot
• Model: Peugeot 407 SW Estate
• Product Codes: 6351T3, 6351FR
• Additional Numbers: No further detailed specifications or related codes available

Whether you are a professional auto mechanic or a car enthusiast performing your own repairs, this socket with wiring harness is an ideal and reliable replacement part for the Peugeot 407. Despite the high quality of the aftermarket part, the bulb functionality is not guaranteed and should be checked or replaced during installation. Equip your vehicle with this socket to ensure dependable performance and enhanced safety day and night.

Looking for a reliable part to restore the rear lighting of your Peugeot 407 Kombi? We offer a proven socket with wiring harness for the left rear lamp, ready for immediate installation. This component is essential for the safe and proper operation of your vehicle’s rear lighting, ensuring visibility and thus your safety while driving at night or in low visibility conditions.

The socket is a key part that provides an effective and stable connection between the rear light bulbs and the vehicle’s electrical system. It is crucial for both illumination and flashing functions of the rear lights. Since the bulbs’ functionality cannot be guaranteed, we recommend checking and replacing them if necessary to achieve full lighting performance.

Technical Information

• Manufacturer: PSA Citroen Peugeot
• Model: Peugeot 407 Kombi SW
• Product Codes: 6350T3, 6350FR
• Additional Numbers: Not Specified

This part was carefully removed from a Peugeot 407 Kombi model and inspected by our technicians to ensure its quality and trouble-free operation in your vehicle. Furthermore, installation of the socket is relatively simple and can be performed at home using common tools, making this part an ideal solution for personal replacement without professional service.

Do not wait until your lighting issue becomes a serious safety risk. Keep your Peugeot 407 Kombi in excellent condition and prepared for whatever the road brings. Investing in quality parts always pays off with increased safety and driving satisfaction.

This rear light assembly is essential for maintaining compliance with traffic regulations and improving vehicle aesthetics. If your vehicle’s rear lights are dim or damaged, timely replacement is necessary to avoid visibility issues during night driving. Regular inspections can help identify wear and tear, and it’s recommended to replace the assembly if any cracks or electrical faults are found.

Technical Information

Manufacturer: PSA CITROEN PEUGEOT
Model: Peugeot 407 COUPÉ
Product Codes: 6534PP
Other Numbers: Not available

This product is compatible with the following models: Peugeot 407.

Over time, the nozzle can become clogged or damaged from exposure to weather elements or debris, leading to reduced visibility when driving in adverse conditions. Regular checks and timely replacements ensure optimal functionality of your headlight washers.

Technical Information:

• Manufacturer: PSA Citroën Peugeot
• Model: 407
• Product Codes: 9648976280, 6438L9, 6438N1
• Additional Numbers: Not provided

Replace your headlight washer nozzle to ensure clear visibility and enhance driving safety. Slightly cracked holder may require adhesive for optimal installation.

Designed to fit models from 2008 onwards, this essential component effectively connects the left rear lamp to the vehicle’s electrical system, ensuring proper functionality of your vehicle’s lighting system.

Over time, wiring harnesses may degrade due to exposure to heat, moisture, and vibrations, which can lead to malfunctions in your lighting system. Regular inspection and replacement of wiring harnesses are necessary to maintain the safety and performance of your Peugeot 407.

Technical Information

• Manufacturer: Peugeot
• Model: 407 Sedan
• Product Codes: 6350HP
• Additional Numbers: N/A

The part number for this wiring harness is 6351HP, making it easy to locate when searching for replacements. Regular wear and tear on electrical components can lead to deterioration, which is why replacing the wiring harness is crucial for ensuring your rear lights function correctly.

Replacing a wiring harness can be a straightforward process for those familiar with car repairs. Ensure to disconnect the battery before starting the replacement to avoid any electrical issues. The wiring harness connects to the rear light assembly, and proper installation is key to maintaining optimal light function.

Technical Information:

• Manufacturer: PSA CITROEN PEUGEOT
• Model: 407 Sedan
• Product Codes: 6351HP
• Additional Numbers: N/A