Original right rear fender light for Peugeot 308 II (T9) SW/Combi. An ideal replacement after an accident or a broken original light. This is a used genuine PSA part with product number 9678093880 – the exact OEM number greatly increases the certainty of correct compatibility and makes it easier to find the part.

Main advantages
– Original PSA part – precise fit and reliable function
– Suitable for Peugeot 308 T9 in SW/Combi version (station wagon)
– Quick replacement, no body modifications (plug and play)
– An economic and ecological choice compared to a new part

Technical information
– Location: right rear outer fender lamp (passenger side)
– Model: Peugeot 308 II (T9) SW/Combi
– OEM/cat. number: 9678093880 (PSA CITROEN PEUGEOT)
– Design: including a piece of cabling (connector see photo)
– Condition: used part, light scratch, functional – see photos
– Bulbs/LEDs: supplied as shown in photos (bulbs not guaranteed unless specifically stated)
– Assembly: usually without the need to code the control unit; we recommend visually comparing the connector and attachment with the old part

Compatibility
– Designed for SW/Combi body (not for hatchback)
– For generation 308 II (T9); for a facelift, details may differ – always check against the OEM number

How to verify the correctness of the part
– Compare the OEM number 9678093880 with your original part
– Check the shape of the lamp, the mount and the connector according to the photos
– If in doubt, verify compatibility by VIN

Typical use
– Replacement for a cracked or oxidized rear light
– Repair after a minor accident or mechanical damage

Keywords for easy searching
right rear light Peugeot 308 T9 SW, fender lamp, original Peugeot rear lamp, OEM 9678093880, rear right Combi light, used light Peugeot 308 II

Note: The photos are part of the description and show the actual condition and equipment of the part. Compare details carefully before ordering.

Right rear lamp – internal (on the trunk lid) for Peugeot 308 II (T9) Combi/SW. Original used PSA part with OE number 9678094880. Ideal replacement if the original light is damaged – precise fit, original appearance and trouble-free connection to the serial wiring.

Main features
– Location: right side, interior lamp on the luggage compartment lid
– Body: only for station wagon (SW/Combi), does not fit hatchback
– Models: Peugeot 308 II (T9) SW, approx. 2014–2021
– OE/OEM: 9678094880 (PSA)
– Design: original part from original production, plug & play on original connector
– Condition: used part, slight surface scratch – see photos; fully functional

Technical information
– Power supply and connector: original PSA connector; connection without modifications
– Light function: internal rear lamp on the lid (usually position/brake depending on the car’s equipment)
– Power supply system: 12 V, for European vehicle specification
– Assembly: replacement by access from the inside of the trunk lid; attachment to serial holders; no control unit coding required (usually)

Compatibility
– Peugeot 308 T9 SW/Combi (2nd generation) – before purchasing, verify compliance according to OE number 9678094880 or according to VIN.
– The differences may be according to the year of manufacture, equipment or facelift – please compare the shape, connector and marking according to the photo and part number.

Why choose this part?
– Original quality and exact compatibility – fits and works like factory
– Significant savings compared to a new part
– Quick and easy installation without modifications to the electrical installation

Search notes
Right rear trunk lid lamp, right inner rear light, tailgate lamp RH inner, Peugeot 308 T9 SW Combi, OE 9678094880.

Assembly tip
– Before installation, check the seal and connector on the vehicle and on the lamp.
– When replacing, disconnect the battery to avoid error messages and a short circuit.
– Light bulbs or light modules are included only if they are clearly indicated or shown in the photos.

Set of rear bumper reflectors for Peugeot 308 T9 SW (station wagon). Genuine used PSA part – fits exactly, fits and looks like factory. Also often searched for as rear bumper reflector, reflective insert, reflective strip, bumper reflector. Product/OEM numbers: 9804313480 and 9804315280.

Why choose this part?
– Original PSA (Citroën/Peugeot) – reliable fit and the right shade of red
– An economical and ecological choice: a high-quality used part with a long service life
– Supplied as a set left + right side (set of 2 pcs.)

Compatibility
– Peugeot 308 T9 SW (station wagon), approx. 2014–2021
– Does not fit 308 T9 hatchback (different bumper shape)
– Verification: compare the OEM numbers 9804313480 and 9804315280 with the number on your part, or write the VIN to check

Technical information
– Location: rear bumper, left and right reflector (lower part of the bumper)
– Features: passive reflection (does not contain bulbs or LEDs – not lights)
– Color: red (reflective)
– Material: plastic/PMMA (optical part), body with flexible grips
– Fastening: snap clips into the hole in the bumper
– Homologation: E-mark is usually stamped on the body of the part (check on the specific piece)

Condition and origin
– Used original part from disassembly, fully functional
– Normal small cosmetic marks from use possible; always check the condition by looking at the photos

Assembly tips
– Installation usually without the need to dismantle the entire bumper; access to the hole from behind or careful prying with a plastic lever
– Check the integrity of the mounting lugs and the cleanliness of the seat in the bumper before snapping
– It is recommended to clean the surface and check the tight fit so that the reflector holds well and does not creak

Search keywords
– Rear bumper reflector Peugeot 308 T9 SW
– Bumper reflector 308 station wagon
– OEM 9804313480, OEM 9804315280, PSA original
– Peugeot 308 T9 Combi reflectors left right

Are you sure about compatibility? Send the VIN or a photo of the original reflector – we will be happy to verify. Add the kit to your cart and restore the look and safety of your 308 SW quickly and without compromise.

Main product description

Additional brake lamp (third stop lamp) for Peugeot 308 T9 Combi (SW). Original PSA part – ideal replacement for non-functioning LED strip, cracked cover or brake light error message. Thanks to the original design, the dimensions, attachment and connector fit, and assembly is plug & play.

Key features
– Original PSA part – perfect fit and homologation
– LED third brake light with clear visibility
– Location: upper center of the rear (spoiler/fifth door)
– Voltage 12 V, connection via OEM connector
– Suitable for cars with a combi body (SW)

OEM/cat. numbers (for search and verification)
– 9688016380
– 6351LX (6351.LX)
– 9800412680
– 9802932180

Compatibility
– Peugeot 308 T9 SW (Combi), approx. 2013–2021
– Also often used on selected Peugeot and Citroën models (e.g. Peugeot 2008, 5008 I, 508, Citroën C4 Picasso II) – always check by VIN or matching OEM numbers above.

Technical information
– Type: additional (third) brake light, LED
– Cover color: red
– Mounting: original points for spoiler/fifth door
– Connector: OEM (without wiring modifications)
– Operating voltage: 12 V
– Homologation: original PSA, suitable for MOT

Condition and origin
– Used original part from a PSA car, fully functional
– Common cosmetic signs of use possible, do not affect function
– We deliver without screws and cabling, unless otherwise stated (please refer to the photos/contents of the e-shop packaging)

Assembly tip
– Before assembly, clean the mating surfaces and check the seals. If the seal is damaged, we recommend replacing it to prevent leakage into the fifth door.
– Confirm compatibility by comparing the OEM number on your original light or by VIN.

Who is the piece ideal for?
– Auto mechanics and home repairers who want a quick and reliable replacement without compromising on quality and brightness.

Search keywords
third brake light, additional brake lamp, third stop lamp, Peugeot 308 T9 SW Combi, 9688016380, 6351LX, 9800412680, 9802932180, original PSA part, rear upper brake light, Peugeot/Citroën LED brake light.

Product description
Original LED headlight control unit (LED driver/ballast) for Peugeot 308 II (T9). This is a used, fully functional part from the original production – an ideal replacement in the event of a malfunction of the daytime running lights, dipped/main beam LEDs or error messages from the lights. Thanks to the OEM numbers, you can easily verify the correctness of the part: PSA 1610426980, Hella 130732940300. Suitable for versions with LED headlights (not for halogen).

Key features
– Genuine PSA/Hella part – exact compatibility and reliability
– Controls LED headlight functions (DRL/daytime running and, depending on the equipment, dipped beam/high beam)
– The unit is universal for both left and right headlights
– Plug & play – identical connectors and mounting, no modifications required
– Tested, functionality guaranteed

Compatibility
– Peugeot 308 II (T9) 2013-2021
– Peugeot 308 SW II (T9) 2014-2021
Note: Designed only for cars with LED headlights. Not suitable for halogen variants.

Catalog/OEM numbers
– PSA: 1610426980
– Hella: 130732940300
Tip: Compare the part number on your original unit and the shape of the connectors/mounts.

Technical information
– Power supply: 12 V (on-board network)
– Communication: CAN-Bus (headlight control unit)
– Mounting: screws directly on the headlight body (aluminum radiator)
– Location: front headlight, left and right
– Design: aluminum body with passive cooling

Condition and origin
– Used original part from disassembly
– Fully tested, no defects, ready to install
– No aftermarket modification, 100% OEM

Assembly and recommendations for car mechanics
– Disconnect the battery before assembly
– Check headlight seals and grommets – moisture often causes unit failures
– When mounting on the LED module cooler, we recommend renewing a thin layer of heat-conducting paste
– After the replacement, delete the error codes and perform a basic diagnosis of the lights
– Initialization via diagnostics may be necessary for some equipment (depending on the SW version of the car)

Package contents
– 1x Peugeot 308 T9 LED headlight unit (PSA 1610426980 / Hella 130732940300)
– Without mounting screws and without other parts of the headlight

Important
– Before ordering, verify that the part number and headlight variant (LED vs. halogen) match
– In case of confusion, send us the VIN – we will verify compatibility

Search Terms (SEO)
Peugeot 308 T9 LED headlight unit, LED driver 308 T9, light control unit 1610426980, Hella 130732940300, Peugeot 308 daytime running light module, Peugeot 308 SW T9 LED headlight ballast, original used PSA part

Product description
Original LED headlight control unit (LED driver/ballast) for Peugeot 308 T9. Used part from disassembly, suitable for repairing non-functioning LED daytime running lights, position or dipped/main beam lights (depending on the specific headlight version). An ideal choice for auto mechanics and home repairers: it maintains original quality while reducing costs compared to a new part.

Key OEM numbers (for search and match verification)
– PSA: 1610426880
– Unit manufacturer: 130732940400
Always compare the part number on your original unit with the list above before purchasing.

Compatibility
– Vehicle: Peugeot 308 T9 (hatchback and SW)
– Years of production: approximately 2013-2021 (T9)
– Side: generally applicable to both left and right LED headlights (depends on part number and headlight version)
– Note: intended for LED headlight. Not suitable for halogen variants.

Typical manifestations of the defect that the part solves
– Non-functioning or flashing LED daytime running lights/position lights
– Error message “light malfunction” on the on-board computer
– LED segments light up weakly or only occasionally
– Damaged/oxidized original unit after running into the headlight

Technical information
– Functions: power supply and control of the LED modules in the headlight (DRL/positional, possibly dipped beam/high beam for Full LED versions – according to the specific headlight)
– Connection: multi-pin connector (exact design according to the headlight manufacturer)
– Mounting: usually on the back of the headlight under the cover; assembly in the original positions
– Control logic compatibility: follow the OEM number; hardware/software versions may vary depending on the year of manufacture and type of headlight

Installation and recommendations
– Disconnect the battery before replacing.
– Check the tightness of the headlight and the condition of the seals to prevent repeated leaks and damage to the new unit.
– Mostly plug & play without the need for coding for the same part number; some versions may have different SW/HW revisions – check by VIN or catalog.
– Work antistatic and clean; do not overload connectors and wiring.

Condition and origin
– Used original part from disassembly
– Always compare the condition visually and functionally with your original work; determine compatibility primarily by OEM numbers

Why choose a used original part
– Original quality and correct function in Peugeot 308 T9 headlight
– Cost saving compared to a new part
– Ecological choice thanks to reuse

Search terms
Peugeot 308 T9 LED headlight unit, LED control unit, LED driver/ballast, DRL module, 308 T9 daytime running light module, 1610426880, 130732940400, Peugeot OEM LED module.