High-quality Valeo Left Daytime Running Light (DRL) designed for the Peugeot 308. This direct-fit LED unit replaces the original equipment and restores factory appearance and daytime visibility. Ideal for professional mechanics and DIY enthusiasts who search by part number (90001685 / 6208X4). The compact LED module delivers efficient illumination, low power consumption and long service life compared with traditional bulbs, improving vehicle conspicuity during daytime driving and enhancing the front-end look of the car.

Application

Fits: Peugeot 308. Commonly referenced by product codes 90001685 and 6208X4. Suitable as a left-side (driver-side in left-hand drive vehicles) daytime running light assembly.

Technical Information

• Manufacturer: Valeo
• Model: Peugeot 308
• Product Codes: 90001685, 6208X4
• Other Numbers: Stellantis / Citroen Peugeot References

Function And Features

• Primary Function: Provide a bright, energy-efficient daytime lighting signature to increase vehicle visibility to other road users.
• Technology: LED module integrated into the front lighting cluster for consistent light output and long lifespan.
• Fitment: Designed as a direct-replacement part for the left DRL position; mounts into the existing lamp housing and connects to the original wiring harness.
• Benefits: Improved reliability over incandescent bulbs, quicker turn-on, lower current draw, and OEM style finish.

Common Failure Causes

• Moisture Ingress: Damaged seals or cracks in the housing can allow water into the unit, causing corrosion or LED failure.
• Thermal Stress: Repeated heating and cooling cycles can degrade LED modules or solder joints over time.
• Electrical Issues: Connector corrosion, wiring faults or blown fuses in the circuit can make the DRL stop working.
• Impact Damage: Front-end impacts or minor collisions often crack mounting tabs or lenses, necessitating replacement.

Replacement Guidance

Basic Steps For Replacement (General Guidance):

• Safety First: Switch off ignition and disconnect the negative battery terminal before starting work on any electrical component.
• Access: Depending on model year and bumper design, access to the DRL may require removal of the front bumper, wheel arch liner or release of retaining clips. Consult vehicle repair manual for exact procedure.
• Disconnect: Carefully unplug the electrical connector from the DRL unit. Release any retaining clips or screws holding the lamp in place.
• Replace: Remove the old unit, fit the new Valeo DRL into the mounting, secure fasteners and reconnect the wiring harness. Ensure seals are intact to prevent moisture ingress.
• Test: Before reassembling trim or bumper, reconnect the battery and verify DRL operation with ignition on. Confirm correct alignment and secure fitment.

Installation Recommendation

• Use Manufacturer Fasteners: Reuse OEM clips and screws where possible or replace damaged fasteners to ensure secure mounting.
• Check Seals And Connectors: Replace any brittle seals and clean or replace corroded connectors to avoid premature failure.
• Professional Help: If bumper removal, alignment or access requires special tools, or if there is body damage, consider professional installation to ensure correct fit and sealing.
• Post-Installation: Verify all lighting functions and check for fault codes with a diagnostic tool if vehicle indicates a lighting system warning.

Why This Part Is Searched By Code

Many mechanics and owners search by the Valeo product codes 90001685 and 6208X4 or by the vehicle model Peugeot 308 when sourcing the correct left DRL unit. Including these codes in listings ensures quick identification and helps find the exact replacement part required.

Product Overview

Direct replacement bulb socket designed for the right-hand rear lamp of the Peugeot 308 Hatchback. Ideal for mechanics and DIY enthusiasts who need a reliable electrical connection for P21/5W dual-filament brake/taillight bulbs. The part is supplied with a short section of wiring but does not include the sealing grommet, so attention to the lamp housing seal is required during installation.

Key Features

• Direct Fit For Peugeot 308 Hatchback Rear Right Lamp
• Designed For Bulb Type: P21/5W (Brake / Tail)
• Supplied With Wiring Section For Easy Replacement
• Simple Plug-In Socket, Compatible With Standard Lamp Assemblies

Technical Information

• Manufacturer: Stellantis (Peugeot/Citroën)
• Model: Peugeot 308 Hatchback
• Product Codes: 1606959180
• Other Numbers: Bulb Type P21/5W

Installation Recommendation

1. Park Vehicle Safely And Switch Off Ignition. For Safety, Disconnect The Negative Battery Terminal If You Will Be Working On The Vehicle Wiring.
2. Open The Boot And Remove Any Interior Trim Panels Or Fasteners To Access The Rear Lamp Assembly.
3. Unscrew Or Unclip The Lamp Assembly From The Body And Carefully Pull It Out To Expose The Bulb Socket.
4. Disconnect The Old Socket From The Wiring Harness And Remove The Bulb By Turning/Withdrawing As Required.
5. Install The New Socket: Connect The Wiring Section, Insert The Bulb, And Ensure The Electrical Contacts Are Clean And Secure.
6. Because This Part Is Supplied Without The Sealing Rubber, Fit A New Grommet Or Ensure The Lamp Housing Seal Is Intact To Prevent Water Ingress.
7. Reinstall The Lamp Assembly, Refit Interior Trim, Reconnect The Battery If Disconnected, And Test All Lighting Functions (Tail, Brake, Indicator If Applicable).

Why This Part Fails Most Often

Bulb sockets in rear lamps are subject to heat, vibration, moisture, and oxidation, which are the primary causes of failure. Typical failure modes include:

• Corroded Or Pitted Contacts Causing Intermittent Or No Connection.
• Melted Or Deformed Plastic From Overheating (Often Caused By Poor Contact Or High Resistance At The Connector).
• Water Ingress When The Sealing Grommet Is Missing Or Damaged, Leading To Short Circuits Or Corrosion.
• Damaged Wiring From Mechanical Stress Or Rodent Activity.

With normal use, a socket can last many years; failures are more common in vehicles exposed to damp environments, salt, or frequent vibration.

Additional Notes

• Because This Item Does Not Include The Sealing Rubber, Replace The Grommet Or Verify The Lamp Housing Seal To Avoid Moisture Problems.
• Use Clean Bulb Contacts And Correct Bulb Type (P21/5W) To Prevent Overheating And Premature Wear.
• If You Encounter Repeated Contact Failures, Inspect The Wiring And Ground Connections For Corrosion Or Damage.

Used Third Brake Light (Center High Mount Stop Lamp) specifically for Peugeot 308 T7 Hatchback. This direct-fit replacement restores the high-mounted brake lamp function, improving rear visibility and road safety. Commonly searched by part numbers 9680426580 and 6350CR, this unit is ideal for workshops and DIY mechanics who need a reliable exterior lighting spare for Peugeot 308 bodywork repairs.

Features And Benefits

– High-mounted brake lamp designed to meet original mounting points and connector layout for easy fitment.
– Improves braking visibility to vehicles behind, reducing risk of rear-end collisions.
– Often replaced after collision damage to tailgate or rear glass area, or when internal LED/lens fails.
– Searched by OEM codes 9680426580 and 6350CR, increasing findability for technicians and parts specialists.

Compatibility

Fits:

• Peugeot 308 T7 Hatchback

Check the part numbers printed on the original unit (9680426580 / 6350CR) to confirm compatibility before installation.

How The Part Works

The third brake light, also known as the center high mount stop lamp (CHMSL), provides an additional brake signal at the rear centerline of the vehicle. It operates in parallel with the main brake lights and is typically LED-based on modern vehicles, offering fast illumination and long life. Proper function is critical for signaling braking intentions to following traffic.

How To Replace (Quick Guide)

• Remove interior tailgate trim to access the lamp assembly fasteners and electrical connector.
• Unplug the electrical connector and remove mounting screws or clips securing the lamp.
• Carefully remove the old unit, noting any seal or gasket orientation.
• Install the replacement unit, secure fasteners, reconnect the electrical connector and reattach trim.
• Test the brake lamp operation with the ignition on and brake pedal pressed; ensure proper sealing to prevent water ingress.

Installation Recommendations

• Perform installation on a clean, dry work surface and keep small fasteners organized.
• Inspect the wiring harness and connector for corrosion or damage; clean contacts if necessary.
• Replace any degraded seals or clips to maintain watertight installation.
• Torque fasteners to manufacturer specification where applicable and ensure the lamp housing sits flush with the tailgate opening.
• After installation, verify lamp operation from outside the vehicle and check for moisture ingress after washing or rain.

Reason Why The Part Most Often Fails

• Impact Damage: Rear-end collisions or tailgate impacts commonly crack the lens or deform the housing.
• Water Ingress: Failed seals allow moisture to enter, causing corrosion or LED failure.
• Electrical Issues: Corroded connectors, broken wires or grounding faults can interrupt lamp function.
• Thermal And Aging Effects: Prolonged heat cycles and UV exposure can degrade plastic housing and seals over time.

Technical Information

• Manufacturer: Stellantis / Peugeot / Citroën
• Model: Peugeot 308 T7 Hatchback
• Product Codes: 9680426580, 6350CR
• Other Numbers: 6350CR | 9680426580

Order this third brake light by referencing the part numbers above to quickly restore rear signaling performance on Peugeot 308 T7 Hatchback vehicles. Suitable for professional garages and competent DIY mechanics familiar with tailgate trim removal and vehicle electrical checks.

The right front fog lamp for the first generation Peugeot 308 (T7) will reliably restore the function of the fog lights and the appearance of the front bumper. This is an original PSA part with codes 9680498880 / 6206F0, intended for the right (passenger) side. An ideal choice if you are dealing with cracked glass, broken brackets or leakage of the original light.

The fog lamp function is essential for safety in dense fog, rain and reduced visibility – it creates a wide, low beam of light that reduces glare from fog and better illuminates the edges of the road. The exact shape and fit of the original part ensure correct light geometry and compatibility with the 308 I bumper.

Why this part is changed often: common causes are mechanical damage from stones, cracks from hitting the curb, broken mounting lugs, or leaks that degrade the shine of the reflective surface over time. By replacing the original piece, you will avoid problems at the MOT and poor visibility in bad weather.

Installation is usually accessible from the wheel arch or after removing the plastic cover in the bumper for the 308 I. The fog light is fixed by means of screws to the bracket in the bumper; after installation, we recommend checking the seal and possibly adjusting the angle of the light with the adjusting screw so that it does not dazzle and shines low in front of the vehicle.

Technical information

• Manufacturer: PSA (Peugeot/Citroën)
• Model: Peugeot 308 I (T7), approximately 2007-2013, right front side
• Product codes: 9680498880, 6206F0
• Other numbers: 96 804 988 80, 6206 F0, 6206.F0

Tip to verify compatibility: please compare the listed part numbers with your original headlight and check the shape of the bumper mount. The correct part according to the OEM code is the surest way to a trouble-free installation.

The left rear lamp bulb socket designed for the Peugeot 308 Hatchback provides a reliable mechanical holder and electrical contact for the rear combination bulb. Supplied with a short length of pigtail wiring, this socket is ideal for repairing damaged lamp holders, replacing melted or corroded contacts, or restoring a secure bulb connection after lamp body repairs. The part is commonly searched for by product code and bulb type, which makes it easy to find in catalogs and online stores.

Key Features And Function

The socket secures the P21/5W dual-contact bulb used for stop/taillight and indicator or for combined filament bulbs. It ensures stable electrical contact, proper alignment of the bulb, and mechanical retention inside the lamp housing. The delivered pigtail speeds up replacement where the original harness connector is damaged or brittle. Note: This delivery does not include the rubber sealing grommet, so extra attention to sealing the lamp is required during installation.

Technical Information

• Manufacturer: Stellantis (Peugeot)
• Model: Peugeot 308 Hatchback
• Product Codes: 1606959280
• Other Numbers: P21/5W (Bulb Type; equivalent to 1157 double-contact bayonet)

Fitment

Intended For Left Rear Lamp Use On Peugeot 308 Hatchback Models. The part is typically fitted where the original bulb socket is worn, heat-damaged, or corroded. Buyers often locate this item by searching the product code 1606959280 or the bulb type P21/5W.

Replacement Procedure

• Disconnect Battery If Advised By The Vehicle Repair Manual To Avoid Short Circuits When Working On Wiring.
• Access The Rear Lamp Unit By Opening The Tailgate And Removing Interior Trim Or The Lamp Mounting Screws As Required.
• Remove The Lamp Assembly From The Body If Necessary To Reach The Socket.
• Extract The Old Socket By Releasing Any Retaining Clips Or By Turning/Unplugging The Holder Depending On Lamp Type.
• Connect The New Socket Pigtail To The Vehicle Wiring (Match Colors/Polarity). Use Proper Connectors Or Solder And Heat-Shrink For A Durable Joint.
• Fit The Bulb, Check That It Sits Firmly, And Test Lamp Functions Before Reassembling The Lamp Housing.
• Ensure Proper Sealing Of The Lamp Housing Since This Part Is Supplied Without The Rubber Grommet.

Installation Recommendations

Use Corrosion-Resistant Connectors Or Soldered Joints With Heat-Shrink Tubing For Longevity. Apply A Thin Layer Of Dielectric Grease On Contacts To Reduce Moisture Ingress And Oxidation. Replace Any Damaged Sealing Grommet Or Add Appropriate Sealant To Prevent Water Entry. Verify All Functions (Tail, Brake, Indicator) After Installation And Secure The Wiring Away From Sharp Edges Or Heat Sources.

Why This Part Fails Most Often

Failure Is Usually Caused By Heat Stress From Bulb Operation, Corrosion From Water Ingress (Especially When The Sealing Grommet Is Missing Or Damaged), Loose Or Oxidized Contacts Leading To Intermittent Operation, And Mechanical Fatigue From Vibration. Overheating Can Melt Plastic Contacts And Distort The Socket, While Moisture Causes Increased Resistance And Localized Heating.

Search By Product Code 1606959280 Or Bulb Type P21/5W To Quickly Find This Socket For Peugeot 308 Hatchback Repairs.

The Rear Right Tail Light for Peugeot 308 T7 SW is positioned on the passenger side and plays a crucial role in ensuring your vehicle’s safety. This essential component guarantees visibility during nighttime driving and adverse weather conditions, while complying with road safety regulations.

Technical Information

• Manufacturer: PEUGEOT
• Model: PEUGEOT 308 T7 SW
• Product Codes: 96814438XT, 25950206, 6351FF
• Additional Numbers: 96814438XT

Compatibility and Installation

This tail light is specifically engineered for Peugeot 308 SW models, ensuring perfect compatibility and straightforward installation. It is an ideal replacement part for professional mechanics and car enthusiasts performing repairs at home who want to maintain proper functionality and vehicle aesthetics.

Maintenance and Function

As a critical rear lighting element, the tail light endures constant exposure to the elements and mechanical stress, which may lead to wear or failure over time. Regular inspections are recommended, and replacement should be performed promptly if the light is damaged or malfunctioning to prevent safety risks and avoid legal penalties related to improper signaling.

Benefits

Investing in a high-quality rear right tail light for your Peugeot 308 SW enhances not only your vehicle’s safety but also its visual appeal. This part supports the longevity of your automobile by providing durable and reliable performance.

Order Convenience

Take advantage of our offer to purchase this essential component at a competitive price with fast shipping. This used part is ready for immediate installation to extend the lifespan of your vehicle and ensure safe driving conditions.

Are you searching for a reliable part for your vehicle? The Rear Right Lamp Socket for Peugeot 308 SW marked 6351KW is the perfect choice for repairing or replacing a damaged light. This socket, positioned on the passenger side, includes a piece of wiring that simplifies installation. Although the functionality of the bulbs has not been previously tested, the socket is ready for installation and can significantly enhance the functionality and appearance of your vehicle.

Technical Information
Manufacturer: PEUGEOT
Model: 308 T7 SW
Product Codes: 6351KW
Other Numbers: Not Available

This original car part plays a significant role in the lighting system of your Peugeot 308 SW. The lamp socket is crucial for securely holding the bulbs and ensuring the proper functioning of the lights. Replacing a damaged or non-functional part restores the effectiveness and safety of your lighting, which is especially important when driving in poor lighting conditions. Additionally, the proper functioning of the rear lights increases your visibility to other drivers and contributes to road safety.

Utilize quality spare parts like this one and ensure your car remains in the best possible condition. This part for the Peugeot 308 SW is available with fast shipping at a competitive price. Don’t waste time searching elsewhere – here you have verified quality and reliability from a renowned manufacturer.

Installation is straightforward, and you can often handle it yourself at home with a few basic tools. However, be sure to disconnect the vehicle’s battery before starting work to prevent any potential damage to the electrical system. Safety and proper handling of auto parts should always take priority.

We provide high-quality and certified auto parts like this one to help keep your vehicle in a safe and functional condition. If you need further information or installation guidance, please feel free to contact our customer support.

This rear left tail light is a crucial component for maintaining your vehicle’s safety and aesthetic appearance. It plays a key role in your car’s lighting system by ensuring proper signaling functions such as brake lights, turn signals, and rear illumination.

Mounted on the rear left side of the vehicle, this part fits perfectly behind the driver’s seat on Peugeot 308 SW cars. It complies with traffic safety regulations, especially important for driving in low visibility conditions and at night.

Technical Information:
Manufacturer: PSA Citroen Peugeot
Model: Peugeot 308 T7 SW
Product Codes: 96814447XT, 6350FF, 25950106

Replacing this tail light assembly is straightforward and can be performed by vehicle owners or automotive technicians using basic tools. Since this is a previously used part, check all components such as light modules and seals thoroughly before installation to ensure full functionality and waterproof integrity.

Purchasing this part guarantees a high-quality replacement that matches original specifications, helping keep your vehicle in optimal condition. Using genuine or specifically designated parts ensures not only correct operation but also your vehicle’s safety.

For further information or mounting advice, please contact our customer service center. We are here to assist you for a smooth and trouble-free repair process. Thank you for choosing our products.

Are you looking for a reliable auto part for your Peugeot vehicle? We offer the Rear Left Lamp Socket including a wiring harness for the Peugeot 308 SW, which is an ideal choice for replacing a damaged or non-functional component. This part is located on the driver’s side and is ready for installation. Although the functionality of the bulbs has not been pre-tested, the socket and wiring are thoroughly inspected and maintained in good condition.

Technical Information:
Manufacturer: Peugeot
Model: Peugeot 308 SW
Product Codes: 6350KW
Other Numbers: N/A

This part is specifically designed for Peugeot 308 SW models, known for their reliability and longevity. Replacing the lamp socket may become necessary if damaged during an accident or as a result of normal wear and tear. Proper functioning of the rear lights is crucial not only for your safety but also for complying with traffic regulations. The replacement is relatively easy and can be performed by DIY enthusiasts or professional mechanics without the need for special tools.

Ensure your vehicle is always in a safe and operable condition with our quality used auto parts. This part for Peugeot 308 SW is ready for immediate installation and use, ensuring a quick return of your vehicle to the road. Don’t wait for minor issues to escalate into major problems – invest in quality replacement parts today to save both time and money.

Have you discovered a reliable used part for your Peugeot 308 SW? The Third Brake Light with part number 9681704280 6350EY is the perfect choice for those seeking a high-quality replacement component with a verified origin. This auto part has been carefully selected to meet all necessary standards and ensure maximum safety on the road.

Brake lights are a key component of every vehicle’s safety system, and the third brake light plays a crucial role. Its primary function is to alert other drivers of a reduction in speed or a vehicle’s stop, particularly important in heavy traffic or poor weather conditions.

Technical Information:

• Manufacturer: PSA CITROEN PEUGEOT
• Model: PEUGEOT 308 SW
• Product Codes: 9681704280, 6350EY
• Year of Vehicle Production: 2009

With dimensions and specifications matching the original precisely, this third brake light is specifically designed for Peugeot 308 SW models, ensuring straightforward installation. Mechanics and DIY enthusiasts will appreciate that the light replacement is quick and hassle-free, saving both time and money. If you have any questions regarding installation or compatibility, our team is always ready to assist you.

Don’t wait until your brake light is completely out of service; secure this essential part before it’s necessary. Keep your Peugeot 308 SW safe and functional with our quality checked used parts!