The right rear lamp socket with wiring for Peugeot 206+ is suitable for cars with 3 and 5 doors on the right side behind the passenger. This is a used original part that is not rusty and is fully functional. The socket serves to hold the tail light bulbs and ensures their correct electrical connection to the vehicle wiring. The functionality of the bulbs themselves is not guaranteed.

Technical information:
Manufacturer: Peugeot / PSA
Model: Peugeot 206+ (3/5 doors, right rear lamp – passenger side)
Product codes: 6351GV
Other numbers: may vary depending on the specific design and batch

The part is suitable as a replacement for a damaged or corroded socket, when there are tail lights outages, contact problems or error messages when lighting. A properly functioning rear lamp base is important for operational safety and for the smooth completion of the technical inspection.

Installation recommendations:
– Always disconnect the vehicle battery before installation.
– Check the condition of the contacts on the wiring and in the socket, and in case of oxidation, clean them carefully.
– Check the rear lamp seal to prevent moisture from penetrating the socket.
– Install the socket without force, pay attention to the correct click and routing of the cabling.
– After installation, test all functions of the rear light (sidelights, brake lights, turn signal, reverse light, fog light depending on the equipment).
– When replacing bulbs, use bulbs of the correct type and performance as recommended by the vehicle manufacturer.

Main product description
Original Peugeot 206 rear light seal kit – OEM PSA 6350FP (6350.FP). The ideal solution if your trunk is leaking, your taillights are fogging, or the original foam seal is hardened and leaking. This is an original used part from disassembly, carefully inspected, crack free and ready for assembly. The part is listed in the PSA network as NFP (No Further Production – no longer produced), therefore the original from secondary production is difficult to obtain.

Key benefits
– Stops water from entering the luggage compartment and reduces the risk of corrosion and oxidation of the lamp connectors
– Shape-accurate seal for left and right rear light (L + P set)
– The original material and profile guarantee a correct fit without the need for sealants
– Quick replacement without special tools, suitable for car mechanics and home repairmen

Compatibility
– Peugeot 206, year of manufacture approx. 1998–2009
– Suitable for standard rear lamps (3/5d hatchback; for other body versions, check compatibility by VIN and lamp shape)
– Not sure? Submit VIN – compatibility verification recommended

Technical information
– OEM/PSA Part Number: 6350FP (6350.FP), PSA Designation: NFP
– Location: rear lights, left and right side
– Material: molded foam rubber (water, temperature and vibration resistant)
– Function: seal between the base of the tail light and the body
– Condition: used original part, see photo; flexibility and integrity checked

Package contents
– 2x rear lamp seals (left + right)

Assembly tips
– Disassemble the lamp, carefully clean the contact surfaces on the body and on the lamp from old glue/cut foam
– Install the new gasket without wrinkling and tighten the lamp nuts evenly (do not overtighten to avoid deformation of the gasket)
– Do not use silicone sealants – properly installed original seals seal without them

Search queries / keywords
Peugeot 206 rear light seal, lamp seal 206, light sealing rubber, gasket rear lamp 206, PSA 6350FP, 6350.FP, NFP

Note
This is a used original part from disassembly. Always check the condition according to the photos of the specific piece. If you are unsure about compatibility, please contact us with your car’s VIN.

Original left rear light (tail lamp/tail light) for Peugeot 206, 3/5 doors, from 07/2003. OEM/PSA Part Number: 6350S0 (6350.S0). Used original part from disassembly, fully functional, without bulb socket.

Why choose the original
– Precise fit and reliable watertightness
– Correct optics and light brightness according to ECE, no error messages or improvisations
– Long life – quality materials and surface of the diffuser

Technical information
– Location: left rear (behind the driver), exterior light in fender
– Body: hatchback 3/5 doors (does not fit 206 SW/station wagon, sedan, CC or 206+)
– Designed for models from 07/2003 (facelift)
– Design: incandescent (not LED)
– Functions: contour (W5W), brake (P21W), directional – orange (PY21W), rear fog light (P21W on the left side), integrated reflective element
– Socket/bulb holder: not included – can be purchased separately; the light plugs into the original socket with a PSA multi-pin connector
– Attachment: to the original screws/nuts from the inside of the trunk; the seal is part of the lamp body

Compatibility
– Peugeot 206, 3- and 5d hatchback, production from 07/2003
– OEM/PSA code: 6350S0 (6350.S0)
– If unsure, compare the part number to the original light or verify by VIN

Condition and contents of the package
– Used, tested part from disassembly; fully functional
– Common minor cosmetic marks from use may be present; always see photos for condition
– We supply the complete lamp body without bulb base and without bulbs

Assembly tip
– Before assembly, clean the bearing surface and check the seal, after tightening do not switch the plastic unevenly
– Check the function of all circuits (contour, brake, turn signal, fog light) after connection

Search terms / equivalents
– Left rear light Peugeot 206 3/5 door, tail lamp left, combined lamp left, tail light left, OEM 6350S0, 6350.S0, PSA tail light 206 from 2003

This original part is the ideal choice for a quick and hassle-free replacement – it fits exactly, lights up correctly and lasts.

This genuine-fit right rear taillight is designed for Peugeot 206 Combi models and provides a direct replacement for damaged or broken rear lamps. The unit restores proper brake, tail and indicator light functions, improves vehicle safety and ensures compliance with road visibility standards. Ideal for professional workshops and experienced DIY mechanics who need a reliable, OEM-compatible taillight with known part references (9641540577 / 6351R4).

Fitment And Compatibility

Fits: Peugeot 206 Combi (estate) models. Commonly referenced by part numbers 9641540577 and 6351R4. Verify the lamp shape and mounting points against the vehicle before installation. Note: This item is supplied without the bulb holder/socket—purchase the holder and bulbs separately under code 6351R4 if required.

How It Works

The taillight assembly houses the brake light, tail light and turn signal lenses and directs emitted light through reflectors to maximise visibility. The lamp transfers electrical signals from the vehicle harness to the bulbs via a bulb holder/socket (not included). Proper sealing and secure mounting keep the electrical connections dry and stable to maintain reliable operation.

Replacement Procedure (Overview)

• Open the tailgate and remove the interior trim or access panel to reach the lamp retaining screws.
• Unscrew the retaining bolts or nuts holding the lamp assembly; support the lamp to avoid dropping it.
• Carefully pull the lamp outward and disconnect the wiring connector or remove the bulb holder (if present).
• Install the new lamp assembly, reconnect the wiring or fit the bulb holder (purchased separately), and secure all fasteners.
• Test all light functions (tail, brake, indicator, reverse if applicable) before reassembling the interior trim.

Recommended Installation

Perform installation in a dry, well-lit area. Inspect the mounting gaskets and replace any damaged seals to prevent moisture ingress. Check the vehicle wiring and connector for corrosion or damage and repair as needed. Tighten fasteners to the original torque specification where available. For electrical work, use proper insulated tools and ensure good connector engagement. After fitting, verify correct operation of all lamp functions.

Why Taillights Fail

Common causes of failure include physical impact (cracks or broken mounting tabs), water ingress due to degraded seals, connector corrosion, and heat or vibration causing internal damage. In some cases the bulb holder or wiring harness fails while the outer lens looks intact—remember this assembly is supplied without the bulb holder, so check the socket condition when replacing the lamp.

Technical Information

• Manufacturer: Stellantis / Peugeot
• Model: Peugeot 206 Combi
• Product Codes: 9641540577, 6351R4
• Additional Numbers: 6351R4
• Notes: Supplied Without Bulb Holder/Socket. Bulb Holder And Wiring Can Be Ordered Separately Under Code 6351R4.

Tips For Professionals And DIYers

• Carry spare gaskets and appropriate fasteners when replacing taillights to ensure a watertight fitment.
• If the original lamp failed from moisture, inspect and clean the harness connector and apply dielectric grease to prevent future corrosion.
• When replacing bulbs, use the specified bulb types and avoid touching halogen bulbs with bare hands.

Part numbers and visual fitment references (9641540577 / 6351R4) are commonly used when searching for the correct replacement lamp—include these in searches to improve findability.

Overview

Replacement left rear tail light for Peugeot 206 Combi / Estate. This unit is a direct-fit exterior lamp housing designed for rear combination lighting (stop, tail, indicator and reverse depending on vehicle wiring). Commonly searched by part numbers 9641540677 and 6350R4, it is suitable for mechanics and experienced DIY enthusiasts looking for a reliable body lighting replacement.

Function And Application

The lamp provides rear lighting functions required for safe road operation: tail light, brake light, indicator (if applicable) and reverse light connection via the bulb holder. The supplied lamp housing does not include the bulb socket assembly or bulbs; these are available separately under code 6350R4. Ensure correct bulb types and wattages are used according to vehicle specifications when fitting the socket and bulbs.

Technical Information

• Manufacturer: Peugeot / Stellantis
• Model: 206 Estate (Combi)
• Product Codes: 9641540677
• Other Numbers: 6350R4

Fitment Notes

Designed for left rear position on Peugeot 206 Estate (Combi) bodystyle. Verify the part number against the original lamp before ordering to ensure correct fit. This lamp housing is supplied without the bulb holder/socket and associated wiring harness piece — order code 6350R4 if that component is required.

Installation Recommendations

• Disconnect the negative battery terminal before starting to avoid short circuits and protect vehicle electronics.
• Open the tailgate and remove interior trim panels to access the lamp retaining screws or nuts.
• Unscrew the fasteners and carefully withdraw the lamp assembly from the body, taking care not to damage clips or paintwork.
• Unplug the wiring connector and remove the old bulb holder if present. If your replacement unit lacks the socket, install the bulb holder (code 6350R4) and appropriate bulbs following manufacturer bulb type recommendations.
• Check rubber seals and lamp mounting clips for wear; replace seals to prevent water ingress.
• Reconnect the wiring, test all light functions (tail, brake, indicator, reverse) before final reassembly, then refit trim panels and secure fasteners to the correct torque.
• Use gloves or clean cloth when handling bulbs to avoid oil contamination which shortens bulb life.

Why This Part Commonly Fails

• Water Ingress: Damaged seals or cracked lens allow moisture inside, causing corrosion of contacts and bulb holder failure.
• Impact Damage: Rear bumper impacts or minor collisions often crack the lamp housing or break mounting tabs.
• Electrical Contact Wear: Socket corrosion or loose connectors lead to intermittent lighting or complete failure of functions.
• Age And UV Exposure: Over time plastic lenses can become brittle or discolored, reducing light output and mechanical integrity.

Practical Tips

When replacing the lamp, inspect the wiring harness for chafing and the connector for corrosion. If the original socket is damaged, replace it together with the lamp to ensure a durable repair. Keep the OE numbers 9641540677 and 6350R4 handy when searching or ordering to speed up identification.

This front roof interior lamp is a direct-fit replacement commonly found on small Stellantis models. Designed for workshop use or DIY repair, the unit restores cabin lighting and map lamp functionality. Ideal for mechanics and car owners searching by part number 6362P3. The compact assembly delivers reliable illumination for driver and passenger area and helps maintain a tidy interior appearance.

Features And Function

The unit houses the interior dome/map lights and the switching mechanism that activates lighting when doors open or when the manual switch is pressed. It provides ambient lighting for the front cabin and often integrates map spot lamps. The lamp assembly mounts to the headliner and connects to the vehicle loom via a plug-in connector.

Replacement Procedure

• Disconnect negative battery terminal for safety before starting electrical work.
• Carefully pry out the lamp trim using a plastic trim tool to avoid damaging the headliner.
• Remove any retaining screws or clips holding the lamp module in place.
• Unplug the electrical connector and remove the old unit from the roof.
• Install the replacement unit, connect the electrical plug and test all lighting functions before refitting trim.
• Refit the trim and secure clips/screws. Reconnect the battery and verify operation.

Installation Recommendations

• Perform installation in a dry, well-lit workspace. Keep small clips and screws secure during disassembly.
• Use a plastic trim removal tool to avoid damaging headliner or lens surfaces.
• Test the lamp functions (door-operated, manual switch, map lights) before final assembly.
• If bulbs are not working after installation, check the dome light fuse and the condition of the bulbs; bulbs are not guaranteed with this unit.

Why This Part Most Commonly Fails

Interior lamps commonly fail due to bulb burnout, broken lens or housing clips, damaged sockets, or corrosion in the connector caused by moisture ingress. Mechanical wear from repeated switch use and accidental impacts when loading items into the cabin are frequent causes. Electrical faults such as blown fuses or poor grounding can also produce loss of function.

Technical Information

• Manufacturer: Stellantis (Citroën / Peugeot)
• Model: Citroën C1; Peugeot 107; Peugeot 206; Peugeot 206+
• Product Codes: 6362P3
• Other Numbers: No additional numbers provided

Are you looking for high-quality used auto parts for classics like the Peugeot 206 or 206+? Our available 3rd brake light offers a cost-effective solution for repairs or replacement of your vehicle’s original component. This part is suitable for Peugeot 206 and 206+ hatchback models and ensures enhanced safety through improved visibility of your vehicle during braking.

Brake lights play a crucial role in vehicle active safety. They are essential for informing other drivers of slowing down, which is particularly important in heavy city traffic or during low visibility conditions. Given that this is a significantly stressed component, regular checks and potential replacement are necessary to maintain safety standards.

Technical Information

• Manufacturer: PSA CITROEN PEUGEOT
• Model: PEUGEOT 206, 206+
• Product Codes: 6350K5
• Other Numbers: N/A

This specific part is designed precisely for Peugeot 206 and 206+ hatchback models, ensuring compatibility and easy installation. Replacing the 3rd brake light not only meets legal standards but also gives you peace of mind while driving in all conditions.

Aside from its functionality, this auto part is an important aesthetic element that enhances the modern look of your vehicle. You will appreciate that even a used part can look and function like new. All of this comes at an affordable price without compromising on quality and safety. Don’t leave your safety to chance; invest in reliable parts like this one.

Add this item to your shopping cart and improve both the visual and functional aspects of your car today!

Are you looking for a reliable and high-quality Left Rear Light for your Peugeot 206+? We have the solution for you, which is an original used light with product code 9685618280 and an additional number 6350GV. This light is an ideal choice for those who want to maintain the authentic look and functionality of their vehicle without the need to invest in new parts.

The light is located at the rear of the vehicle behind the driver and is designed for Peugeot 206+ models with three or five-door body styles. Its primary function is to ensure sufficient visibility of the vehicle for other road users during nighttime or in poor lighting conditions.

Technical Information

• Manufacturer: PSA CITROEN PEUGEOT
• Model: Peugeot 206+
• Product Codes: 9685618280, 6350GV

This automotive part is made from durable materials, ensuring a long lifespan even though it is a used part. The replacement light has undergone thorough inspection to ensure its functionality is at the highest possible level. Install this part in your vehicle and make sure your journeys are safe and your vehicle is well-visible.

Installing this light is straightforward and does not require special tools, which makes it easier for both mechanics and DIY enthusiasts looking to perform minor repairs themselves. However, always remember to follow safety regulations, and if you are unsure of your abilities, it is advisable to consult a professional.

Looking for replacement parts for your Peugeot 206+? The Right Rear Fog Light is an excellent fit for Peugeot 206+ models with product code 9685587580 and additional number 6351HA. This original part is designed to be positioned behind the passenger seat and comes without a bulb, allowing easy installation of your existing bulb.

The fog light is a crucial safety feature that ensures better visibility in poor weather conditions. Its placement on the right rear side of the vehicle enhances safety when driving in fog or rain by improving visibility to other drivers. This part is specifically manufactured for Peugeot 206+ models and 3/5 door configurations, ensuring perfect fit and functionality.

Technical Information:
Manufacturer: Peugeot
Model: Peugeot 206+
Product Codes: 9685587580, 6351HA
Other Numbers: N/A

Replacing the right rear fog light is a process that can be performed by anyone with basic automotive skills. It is important to follow safety precautions and ensure that the fog light is properly connected to the vehicle’s electrical system. This part is ideal for those who are repairing their vehicle themselves or for professional mechanics looking for quality replacement parts for Peugeot 206+.

For a deeper understanding of the functionality and replacement of the Right Rear Fog Light for Peugeot 206+, we recommend consulting an expert or referring to the vehicle’s service manual. This way, you can ensure that all steps in the replacement process are executed correctly, and your vehicle is back in safe operational condition.

Remember, quality and functional lights are not only a legal requirement but also a guarantee of your safety and the safety of other road users.

Are you looking for a reliable replacement part for your Peugeot 206+? This Left Rear Fog Light with product code 9685587780 and additional designation 6350HA is the ideal choice for replacing your original light. It comes directly from the original production of PSA Citroen Peugeot, ensuring optimal compatibility and functionality with your vehicle.

The part is designed for Peugeot 206+ models with three or five-door body styles. By maintaining the original specifications and dimensions, it ensures hassle-free installation in the designated location behind the driver. The package also includes a socket and cable, allowing for simple and quick assembly. Please note that the functionality of the bulb is not guaranteed, so we recommend checking and potentially replacing it.

Technical Information:
Manufacturer: PSA Citroen Peugeot
Model: Peugeot 206+
Product Codes: 9685587780, 6350HA
Additional Numbers: Not available

This replacement part is highly sought after for its essential role in increasing safety under low visibility conditions. Fog lights are crucial for better visibility on the road and for enhancing the visibility of your vehicle to other drivers in fog or rain. They are often replaced due to their position on the vehicle, where they are more exposed to damage from stones or road salt. Secure this quality and affordable replacement part to ensure safer driving conditions for yourself and your loved ones.