<?xml version="1.0" encoding="UTF-8"?><rss version="2.0"
	xmlns:content="http://purl.org/rss/1.0/modules/content/"
	xmlns:wfw="http://wellformedweb.org/CommentAPI/"
	xmlns:dc="http://purl.org/dc/elements/1.1/"
	xmlns:atom="http://www.w3.org/2005/Atom"
	xmlns:sy="http://purl.org/rss/1.0/modules/syndication/"
	xmlns:slash="http://purl.org/rss/1.0/modules/slash/"
	>

<channel>
	<title>107 &#8211; Used Parts Vendor</title>
	<atom:link href="https://www.usedpartsvendor.com/body/headlights/107-headlights/feed/" rel="self" type="application/rss+xml" />
	<link>https://www.usedpartsvendor.com</link>
	<description>Citroën Peugeot spare parts</description>
	<lastBuildDate>Fri, 30 Oct 2026 03:03:44 +0000</lastBuildDate>
	<language>en-GB</language>
	<sy:updatePeriod>
	hourly	</sy:updatePeriod>
	<sy:updateFrequency>
	1	</sy:updateFrequency>
	<generator>https://wordpress.org/?v=7.1.4</generator>
	<item>
		<title>Right Rear Lamp Bulb Socket for Citroën C1 and Peugeot 107 1607990780</title>
		<link>https://www.usedpartsvendor.com/body/headlights/c1-i-headlights/right-rear-light-bulb-holder-citroen-c1-peugeot-107-1607990780/</link>
		
		<dc:creator><![CDATA[]]></dc:creator>
		<pubDate>Thu, 08 Oct 2026 05:11:02 +0000</pubDate>
				<guid isPermaLink="false">https://www.usedpartsvendor.com/uncategorized/right-rear-light-bulb-holder-citroen-c1-peugeot-107-1607990780/</guid>

					<description><![CDATA[Stellantis citroën peugeot
1607990780]]></description>
										<content:encoded><![CDATA[<p>Bulb holder for right rear lamp for first-series Citroën C1 and Peugeot 107 2013. Functionality of the bulbs themselves is not guaranteed. Supplied with a piece of wiring.</p>
<p>The Right Rear Lamp Bulb Holder (Part No. 1607990780) is a practical replacement component for first-generation Citroën C1 and Peugeot 107 vehicles. Designed for professional garages and DIY mechanics, this unit provides the electrical contact and mechanical support for stop, tail and indicator bulbs in the right rear lamp cluster. Supplied with a length of wiring, it simplifies repairs where the original connector or short wiring harness is damaged. Including the correct part number in searches increases the chance of quick identification and fitment.</p>
<h3>How It Fits And How To Replace</h3>
<p>Replacement is straightforward for anyone with basic workshop tools. Typical steps:</p>
<ul>
<li>Disconnect the battery before starting the job to avoid short circuits.</li>
<li>Access the rear lamp from the boot/bootlid: remove trim panels and the lamp retaining screws or clips.</li>
<li>Unplug the existing socket from the lamp cluster and note the bulb positions (stop/tail/indicator).</li>
<li>Remove the old holder from the lamp housing and fit the new holder. If necessary, splice the supplied wiring into the vehicle loom using correct connectors or heat-shrink joints.</li>
<li>Refit the lamp, reconnect the battery and test all functions (stop, tail, indicator, reverse if applicable).</li>
</ul>
<h3>Technical Information</h3>
<ul>
<li>Manufacturer: Stellantis (Citroën / Peugeot)</li>
<li>Model: Citroën C1 (First Series), Peugeot 107 (First Series), 2013</li>
<li>Product Codes: 1607990780</li>
<li>Other Numbers: Not Available</li>
</ul>
<h3>Installation Recommendations</h3>
<p>Always disconnect the battery before working on the lighting circuit. Ensure mating surfaces and contacts are clean and free of corrosion before installation. Use dielectric grease on the contacts to improve corrosion resistance and electrical reliability. When splicing the supplied wiring, use sealed heat-shrink connectors or solder and heat-shrink tubing to secure joints. Check the lamp housing for signs of water ingress or damaged seals and repair if needed to prevent premature failure of the new holder.</p>
<h3>Most Common Causes Of Failure</h3>
<p>Bulb holders in rear lamps typically fail due to moisture ingress causing corrosion of the contacts, heat cycling from bulb operation which can deform or melt plastic, vibration leading to cracked plastic or intermittent contacts, and electrical overloads or poor earth connections. Often the visible symptom is flickering lights, intermittent operation, or a circuit that fails under load. Lifespan varies with vehicle use and environment; in humid or salt-exposed conditions failures appear sooner.</p>
]]></content:encoded>
					
		
		
			</item>
		<item>
		<title>Left Rear Lamp Bulb Socket Citroën C1 Peugeot 107 1607990980</title>
		<link>https://www.usedpartsvendor.com/body/headlights/c1-i-headlights/left-rear-light-bulb-socket-citroen-c1-peugeot-107-1607990980/</link>
		
		<dc:creator><![CDATA[]]></dc:creator>
		<pubDate>Thu, 08 Oct 2026 05:05:03 +0000</pubDate>
				<guid isPermaLink="false">https://www.usedpartsvendor.com/uncategorized/left-rear-light-bulb-socket-citroen-c1-peugeot-107-1607990980/</guid>

					<description><![CDATA[Stellantis Citroën Peugeot
1607990980]]></description>
										<content:encoded><![CDATA[<p>Left rear lamp bulb holder for first-series Citroën C1 and Peugeot 107 2013. Functionality of the bulbs themselves is not guaranteed. Supplied with a short piece of wiring.</p>
<p>This left rear tail light bulb socket (often searched under part number 1607990980) is a direct replacement for many first‑generation Citroën C1 and Peugeot 107 rear lamp assemblies. Designed for professional garages and DIY mechanics, the unit allows quick restoration of a faulty or damaged rear lamp connection without replacing the whole light cluster. Supplied with a short length of wiring to simplify installation or repairs.</p>
<h3>Technical Information</h3>
<ul>
<li><strong>Manufacturer:</strong> Citroën / Peugeot (Stellantis)</li>
<li><strong>Model:</strong> Citroën C1 (first series), Peugeot 107 (first series) — compatible with vehicles up to around 2013</li>
<li><strong>Product Codes:</strong> 1607990980</li>
<li><strong>Other Numbers:</strong> OE-type replacement for factory tail lamp socket assemblies on listed models</li>
</ul>
<h3>Compatibility And Notes</h3>
<p>Fits left rear lamp positions on first‑generation Citroën C1 and Peugeot 107 models. Always verify the physical shape, connector type and pin arrangement against the original part — the part number 1607990980 is commonly used in searches and listings.</p>
<h3>Installation Recommendation</h3>
<p>Recommended for installation by experienced technicians or competent DIYers. General replacement steps:</p>
<ul>
<li>Disconnect the battery before starting electrical work to avoid short circuits.</li>
<li>Remove the rear lamp assembly from the body following the vehicle manufacturer’s procedure (access via boot/trunk lining and unscrew retaining fasteners).</li>
<li>Unplug the original bulb holder and remove any retaining clips. Note bulb orientation and pin positions.</li>
<li>Install the replacement socket, connect the supplied wiring harness or splice carefully using appropriate connectors, soldering or approved crimp terminals.</li>
<li>Protect connections with heat shrink or dielectric grease to reduce corrosion risk and ensure good contact.</li>
<li>Refit the lamp assembly, reconnect the battery and test all lamp functions (tail, stop, indicator) before final assembly.</li>
</ul>
<h3>Why This Part Most Often Fails</h3>
<p>Common failure causes include:</p>
<ul>
<li>Corrosion of contacts caused by moisture ingress or damaged sealing in the lamp housing.</li>
<li>Wear from repeated heat cycling and vibration leading to poor electrical contact or broken plastic housings.</li>
<li>Damaged wiring or connector pins due to accidental impacts, faulty bulb installation or previous repairs.</li>
<li>Overheating from incorrect bulb types or poor contact, which can melt the socket or deform terminals.</li>
</ul>
<h3>Practical Tips</h3>
<ul>
<li>Always replace burned or loose bulbs when renewing the socket — bulbs are not guaranteed to be functional with this part.</li>
<li>Use dielectric grease on terminals to prolong life and prevent corrosion.</li>
<li>Check earth/ground connections if symptoms persist after replacement.</li>
<li>Keep the lamp housing seals in good condition to prevent future water ingress.</li>
</ul>
<p>Part number 1607990980 is a common search term for this socket — include it when looking for compatibility or listing this item in catalogs and e‑shop filters.</p>
]]></content:encoded>
					
		
		
			</item>
		<item>
		<title>Left Rear Lamp Peugeot 107 2013 81560-0H090 1607990580</title>
		<link>https://www.usedpartsvendor.com/body/headlights/c1-i-headlights/left-rear-light-peugeot-107-2013-81560-0h090-1607990580/</link>
		
		<dc:creator><![CDATA[]]></dc:creator>
		<pubDate>Thu, 08 Oct 2026 04:53:03 +0000</pubDate>
				<guid isPermaLink="false">https://www.usedpartsvendor.com/uncategorized/left-rear-light-peugeot-107-2013-81560-0h090-1607990580/</guid>

					<description><![CDATA[Stellantis Citroën Peugeot
81560-0H090 1607990580]]></description>
										<content:encoded><![CDATA[<p>Left rear lamp light for PEUGEOT 107 2013<br />Socket with bulb can be purchased separately<br />Can be used on Citroën C1<br />Driver&#8217;s side</p>
<h3>Product Overview</h3>
<p>High-quality left rear tail lamp assembly compatible with Peugeot 107 (2013) and compatible with first-generation Citroën C1. Ideal for mechanics and DIY enthusiasts looking for a direct-fit replacement part identified by OE code 81560-0H090 and reference 1607990580. The unit houses the tail, brake, and indicator functions in a single compact assembly; bulb holder can be ordered separately if required.</p>
<h3>Compatibility</h3>
<p>Designed For: Peugeot 107 (2013)<br />Also Fits: Citroën C1 (first generation / equivalent rear lamp layout)<br />Fitment: Left / Driver&#8217;s Side</p>
<h3>Function And Common Faults</h3>
<p>Function: The rear lamp assembly provides tail light illumination, brake light, and turn signal indication. It ensures visibility and safety at the rear of the vehicle and integrates with the vehicle wiring harness via a plug-in connector and a removable bulb socket.</p>
<p>Why It Fails: Rear lamp failures are most commonly caused by impact damage (minor collisions or parking knocks), water ingress through damaged seals causing corrosion of contacts or sockets, and brittle or cracked lenses from age and UV exposure. Bulb holders and connectors can also corrode or loosen, causing intermittent operation.</p>
<h3>How To Replace</h3>
<p>Typical Replacement Steps (general guide for experienced technicians):<br />1. Disconnect the vehicle battery before starting.<br />2. Access the lamp from inside the trunk or luggage compartment by removing the trim panel to reach the mounting screws and connector.<br />3. Unscrew the retaining bolts and carefully pull the lamp assembly outwards.<br />4. Unplug the wiring connector and remove the bulb socket if replacing separately.<br />5. Fit the new lamp assembly, connect the wiring plug, secure the mounting bolts, and reassemble trim.<br />6. Reconnect the battery and check all lamp functions (tail, brake, indicator) before finishing.</p>
<p>Note: Follow manufacturer torque specifications and trim removal procedures to avoid damaging clips or body panels.</p>
<h3>Technical Information</h3>
<p>Manufacturer: Stellantis (Citroën / Peugeot)<br />Model: Peugeot 107 (2013) / Compatible With Citroën C1<br />Product Codes: 81560-0H090<br />Additional Numbers: 1607990580</p>
<h3>Installation Recommendations</h3>
<p>Installation Tips: Always disconnect the battery before removal and wear eye protection when working with bulbs. Inspect the wiring connector and body seal—replace the bulb holder or seal if corrosion or damage is present. Use dielectric grease on contacts to slow future corrosion. After installation, verify that all light functions operate correctly and that the lamp sits flush to the body to maintain proper sealing.</p>
<h3>Why Choose This Part</h3>
<p>This tail lamp is an economical direct-fit solution for restoring rear lighting and safety to Peugeot 107 and compatible Citroën C1 models. Provided product codes (81560-0H090, 1607990580) make it easy to locate the correct assembly. Suitable for professional workshops and competent DIY mechanics who require a reliable replacement lamp assembly.</p>
<h3>Additional Notes</h3>
<p>If the bulb socket is not included, the socket and bulb can be purchased separately. Check the bulb type and holder before ordering to ensure you have the correct replacement bulbs and accessories on hand.</p>
]]></content:encoded>
					
		
		
			</item>
		<item>
		<title>Right Rear Lamp Bulb Socket Citroën C1 Peugeot 107 634681</title>
		<link>https://www.usedpartsvendor.com/body/headlights/c1-i-headlights/citroen-c1n-c1-peugeot-107-634681-2/</link>
		
		<dc:creator><![CDATA[]]></dc:creator>
		<pubDate>Thu, 12 Feb 2026 03:03:39 +0000</pubDate>
				<guid isPermaLink="false">https://www.usedpartsvendor.com/uncategorized/citroen-c1n-c1-peugeot-107-634681-2/</guid>

					<description><![CDATA[Stellantis Citroën Peugeot
634681 81550-0H060 6351X8 6351X6]]></description>
										<content:encoded><![CDATA[<p>Bulb socket for the right rear lamp for first generation Citroën C1 and Peugeot 107. Functionality of the bulbs themselves is not guaranteed.</p>
<p>This replacement bulb socket is intended for the right-hand rear lamp on first generation Citroën C1 and Peugeot 107 models. It secures and connects the brake/taillight and indicator bulbs to the vehicle wiring harness. The part is commonly searched by OE and supplier numbers shown below, which makes identification and ordering straightforward for workshops and DIYers.</p>
<h3>Technical Information</h3>
<p><strong>Manufacturer:</strong> Stellantis (Citroën / Peugeot)</p>
<p><strong>Model:</strong> Citroën C1 (First Generation), Peugeot 107 (First Generation)</p>
<p><strong>Product Codes:</strong> 634681, 81550-0H060</p>
<p><strong>Other Numbers:</strong> 6351X8, 6351X6</p>
<h3>Function And Application</h3>
<p>The socket holds and electrically connects the rear lamp bulbs (tail/brake/indicator) to the vehicle&#8217;s wiring. It provides mechanical support, electrical contacts and, in many designs, a basic seal against moisture. This item is a direct-fit component for the right rear light cluster on the listed vehicles and is intended for use when the original socket is damaged, corroded or has poor electrical contact.</p>
<h3>Replacement Procedure (Overview)</h3>
<ul>
<li>Open the rear boot/trunk and remove interior trim panels or access flap to reach the lamp assembly.</li>
<li>Unscrew or unclip the tail lamp fasteners and carefully withdraw the lamp housing from the body.</li>
<li>Locate the bulb socket at the rear of the lamp housing, press the retaining tab and rotate or pull the socket out depending on the design.</li>
<li>Disconnect the electrical connector, replace the old socket with the new one, reconnect and test the circuit before refitting the lamp housing.</li>
<li>Reassemble the lamp and interior trim, ensuring all seals and fasteners are secured to prevent water ingress.</li>
</ul>
<h3>Recommendations For Installation</h3>
<ul>
<li>Work on a cold vehicle and disconnect the battery if you will be handling multiple electrical connections.</li>
<li>Check bulb condition before final assembly—this socket is supplied without guarantee of bulb functionality.</li>
<li>Clean mating surfaces and connector pins; apply a light dielectric grease to contacts to reduce future corrosion.</li>
<li>Inspect the lamp housing seal and replace if damaged to avoid moisture reaching the new socket.</li>
<li>After installation, verify all light functions (tail, brake, indicator, and reverse if applicable) to ensure proper operation.</li>
</ul>
<h3>Why This Part Commonly Fails</h3>
<p>The most frequent causes of socket failure are moisture ingress and corrosion of the electrical contacts, heat-related plastic degradation from bulb operation, mechanical damage during bulb changes, and general aging. Water or condensation inside the lamp accelerates corrosion and can cause intermittent connections or complete loss of contact. Poorly seated bulbs or vibration can also lead to cracked sockets or broken retaining tabs.</p>
<p>This socket is a practical, cost-effective repair for restoring reliable rear lamp connection and ensuring safe, legally compliant lighting on the road. Many professionals and DIY enthusiasts search by the OE numbers listed above when replacing this part.</p>
]]></content:encoded>
					
		
		
			</item>
		<item>
		<title>Right Rear Lamp Bulb Sockets with Wiring Harness Citroën C1 Peugeot 107 634681</title>
		<link>https://www.usedpartsvendor.com/body/headlights/c1-i-headlights/right-rear-lamp-bolt-base-with-citroen-c1-peugeot-107-634681-cable-cable-2/</link>
		
		<dc:creator><![CDATA[]]></dc:creator>
		<pubDate>Thu, 12 Feb 2026 03:03:39 +0000</pubDate>
				<guid isPermaLink="false">https://www.usedpartsvendor.com/uncategorized/right-rear-lamp-bolt-base-with-citroen-c1-peugeot-107-634681-cable-cable-2/</guid>

					<description><![CDATA[Stellantis Citroën Peugeot
634681 81550-0H060 6351X8 6351X6]]></description>
										<content:encoded><![CDATA[<p>Bulb holder for the right rear lamp with a piece of wiring for Citroën C1 and Peugeot 107. Functionality of the bulbs themselves is not guaranteed.</p>
<h3>Product Overview</h3>
<p>This replacement bulb holder with an attached wiring pigtail is designed for the right rear lamp assembly on Citroën C1 and Peugeot 107 vehicles. It restores the electrical connection between the vehicle harness and the lamp sockets, providing a quick repair option for broken sockets, damaged leads or corroded contacts. Ideal for professional workshops and DIY mechanics who search by part number to ensure compatibility.</p>
<h3>Key Features</h3>
<ul>
<li>Direct fit for right rear lamp application on Citroën C1 and Peugeot 107 (first generation).</li>
<li>Includes socket(s) and a piece of wiring for straightforward replacement of the damaged harness section.</li>
<li>Supplied without bulbs; the functionality of bulbs is not guaranteed.</li>
<li>Often stocked and searched by OE/product codes for fast identification.</li>
</ul>
<h3>Technical Information</h3>
<ul>
<li>Manufacturer: Stellantis</li>
<li>Model: Citroën C1 (First Generation), Peugeot 107</li>
<li>Product Codes: 634681, 81550-0H060, 6351X8, 6351X6</li>
<li>Additional Numbers: 634681, 6351X6, 6351X8, 81550-0H060</li>
</ul>
<h3>Installation Recommendations</h3>
<p>Follow safe working practices and vehicle-specific procedures when replacing the lamp holder. Recommended steps:</p>
<ol>
<li>Disconnect the vehicle battery before starting work to avoid short circuits or damage to electrical components.</li>
<li>Access the right rear lamp assembly from the boot/compartment: remove trim panels and unscrew the lamp housing fasteners.</li>
<li>Remove the lamp assembly and access the old socket/wiring. Unplug any connectors and rotate or unclip the socket to release it from the housing.</li>
<li>Fit the new holder, route the pigtail to avoid sharp edges, and secure any retention clips or grommets to maintain sealing against moisture.</li>
<li>Reconnect connectors, reassemble the lamp and test all functions (tail, stop, indicator) before reattaching trim panels.</li>
<li>Use dielectric grease on contacts to reduce corrosion risk and ensure a reliable connection.</li>
</ol>
<h3>Why This Part Fails</h3>
<ul>
<li>Moisture Ingress: Water entry into the lamp housing causes corrosion of contacts and connectors.</li>
<li>Heat Damage: High operating temperatures or incorrect bulb wattage can melt plastic sockets or deform contacts.</li>
<li>Mechanical Stress: Vibration, impact, or repeated bulb changes can crack the plastic or loosen contacts.</li>
<li>Electrical Contact Wear: Oxidation and loss of spring tension in contacts lead to intermittent or non-functioning lights.</li>
</ul>
<h3>How Replacement Is Performed</h3>
<p>The bulb holder is typically replaced by removing the tail lamp assembly, disconnecting the old socket from the lamp and harness, and installing the new holder into the lamp housing. Reassembly is straightforward: secure the lamp, reconnect the battery, and verify all rear light functions. If corrosion or wiring damage extends beyond the holder, additional harness repairs may be necessary.</p>
<h3>Practical Notes</h3>
<ul>
<li>Searches for this part are often performed using the product codes listed above—use them to speed up identification.</li>
<li>Bulbs are not included and their operation is not guaranteed with this part; check and replace bulbs if required.</li>
<li>If the lamp housing shows signs of cracking or heavy moisture ingress, replace or reseal the housing to prevent repeat failures.</li>
</ul>
]]></content:encoded>
					
		
		
			</item>
		<item>
		<title>Left Rear Lamp Bulb Socket Citroën C1 Peugeot 107 634686</title>
		<link>https://www.usedpartsvendor.com/body/headlights/c1-i-headlights/left-rear-lamp-base-citroen-c1-peugeot-107-634686-2/</link>
		
		<dc:creator><![CDATA[]]></dc:creator>
		<pubDate>Thu, 12 Feb 2026 03:03:39 +0000</pubDate>
				<guid isPermaLink="false">https://www.usedpartsvendor.com/uncategorized/left-rear-lamp-base-citroen-c1-peugeot-107-634686-2/</guid>

					<description><![CDATA[Stellantis Citroën Peugeot
81560-0H060 6350X8 6350X6 634686]]></description>
										<content:encoded><![CDATA[<p>Bulb holder for the right rear lamp for first-series Citroën C1 and Peugeot 107. Functionality of the bulbs themselves is not guaranteed.</p>
<p>This replacement tail lamp bulb socket is designed for technicians and DIY motorists who maintain Citroën C1 and Peugeot 107 vehicles. The part restores a reliable electrical connection in the rear light cluster, eliminating flicker, intermittent contact and poor grounding caused by worn or damaged sockets. Frequently searched by OE and reference numbers, this item is suitable when the original holder has cracked, corroded or melted around the terminals.</p>
<h3>Technical Information</h3>
<ul>
<li>Manufacturer: Stellantis / Citroën / Peugeot</li>
<li>Model: Citroën C1 (First Series), Peugeot 107 (First Series)</li>
<li>Product Codes: 81560-0H060, 6350X8, 6350X6</li>
<li>Other Numbers: 634686</li>
</ul>
<h3>Fitment</h3>
<p>Compatible With: Citroën C1 First Generation (2005–2014), Peugeot 107 First Generation (2005–2014). Intended For Use In Rear Light Assemblies As The Bulb Socket/Holder.</p>
<h3>Installation Recommendations</h3>
<ul>
<li>Prepare: Park on a level surface, switch off ignition and remove the negative terminal of the battery for added electrical safety.</li>
<li>Access: Open the boot and remove the interior trim or access panel behind the tail light cluster. Unscrew or unclip the tail lamp to reach the socket.</li>
<li>Remove Old Socket: Twist or unclip the old holder from the lamp housing, disconnect the wiring plug and carefully extract any retained bulb(s). Inspect wiring for heat or corrosion damage.</li>
<li>Install New Socket: Insert the new holder into the lamp housing until it locks, reconnect the wiring plug and install correct bulbs. Use a dielectric grease sparingly on contacts to reduce future corrosion.</li>
<li>Test: Reconnect the battery, test all rear light functions (tail, brake, indicator, reverse if applicable) before reassembling trim and securing the lamp.</li>
<li>Tip: Replace compromised bulbs and clean contact surfaces to ensure long-term reliability. Avoid using higher-wattage bulbs than specified, as they accelerate socket deterioration.</li>
</ul>
<h3>Most Common Failure Causes</h3>
<p>Bulb holders in rear lamps typically fail due to moisture ingress and corrosion, heat damage from over-wattage bulbs or poor ventilation, mechanical fatigue and cracking of the plastic after years of vibration, and loosening or burning of electrical contacts that create intermittent connection or total failure. Road salt and contaminated water accelerate corrosion, especially in vehicles used in cold climates or with frequent short trips.</p>
<p>Note: This listing refers to the bulb holder only. The functionality of bulbs themselves is not guaranteed and should be checked separately. Many customers search using OE numbers like 81560-0H060, 6350X8, 6350X6 or reference 634686 to find the correct replacement quickly.</p>
]]></content:encoded>
					
		
		
			</item>
		<item>
		<title>Left Rear Lamp Bulb Socket With Wiring Citroën C1 Peugeot 107 634686</title>
		<link>https://www.usedpartsvendor.com/body/headlights/c1-i-headlights/left-rear-lamp-bolt-base-with-citroen-c1-peugeot-107-634686/</link>
		
		<dc:creator><![CDATA[]]></dc:creator>
		<pubDate>Thu, 02 Oct 2025 02:22:03 +0000</pubDate>
				<guid isPermaLink="false">https://www.usedpartsvendor.com/uncategorized/left-rear-lamp-bolt-base-with-citroen-c1-peugeot-107-634686/</guid>

					<description><![CDATA[Stellantis Citroën Peugeot
81560-0H060 6350X8 6350X6 634686]]></description>
										<content:encoded><![CDATA[<p>Socket for right rear lamp bulb holder for first series Citroën C1 and Peugeot 107. Supplied with a short length of wiring. Functionality of the bulbs themselves is not guaranteed.</p>
<p>This replacement bulb socket with wiring harness is designed for rear light applications on first‑generation Citroën C1 and Peugeot 107 vehicles. It provides a direct-fit electrical connection for standard rear bulbs and is commonly sought by mechanics and DIY enthusiasts under part numbers such as 634686, 6350X8 or 81560-0H060. The included pigtail cable simplifies installation when the original wiring or connector is damaged.</p>
<p>The part is ideal for quick repairs to restore a secure bulb connection and prevent intermittent lighting faults. Note that this listing covers the socket and short cable only; bulbs are not guaranteed to be functional and are usually replaced separately.</p>
<h3>Technical Information</h3>
<ul>
<li>Manufacturer: Stellantis / Citroën / Peugeot</li>
<li>Model: Citroën C1 (First Series), Peugeot 107 (First Series)</li>
<li>Product Codes: 81560-0H060, 6350X8, 6350X6, 634686</li>
<li>Additional Numbers: 6350.X8, 81560-060</li>
</ul>
<h3>Function And Fitment</h3>
<p>The socket secures rear lamp bulbs in the tail light assembly and provides the electrical contact for stop, tail or indicator bulbs depending on the lamp position. The short cable section allows reconnection to the vehicle wiring loom when the original connector is cracked, corroded or the wiring is cut. This part fits the rear lamp assemblies used on first‑generation Citroën C1 and Peugeot 107 models.</p>
<h3>Recommended Installation</h3>
<ol>
<li>Park on a level surface, switch off the ignition and remove the key. For safety, disconnect the negative battery terminal if you will be handling wiring extensively.</li>
<li>Open the boot and remove the trim or access panel to reach the tail light cluster. On C1/107 models this is usually accessible from inside the boot after removing a few fasteners.</li>
<li>Unscrew or unclip the tail light unit and gently pull it clear. Unplug the main connector and remove the bulb holder by pressing the locking tab and turning or pulling as required.</li>
<li>Release the old socket from the lamp, fit the replacement socket into the bulb holder, and connect the supplied cable to the vehicle loom (secure with the original connector or suitable crimp/heat‑shrink joints).</li>
<li>Test the lamp functions (tail, brake, indicator) before refitting the lamp and trim. Ensure all connections are tight and protected from moisture.</li>
</ol>
<h3>Why This Part Commonly Fails</h3>
<ul>
<li>Corrosion: Water ingress or condensation in the tail lamp can corrode contacts and cause intermittent or failed connections.</li>
<li>Heat And Vibration: Repeated heating cycles from bulbs and road vibration can crack plastic sockets and weaken contacts over time.</li>
<li>Mechanical Damage: Impact, over‑tightening when refitting the lamp, or incorrect bulb removal can break the socket or wiring.</li>
<li>Ageing Wiring: Insulation becomes brittle on older cars, leading to exposed wires or broken pigtails.</li>
</ul>
<p>For a durable repair, clean the lamp housing, replace any damaged seals to prevent future moisture ingress, and use proper electrical connectors when joining wires. Regular inspection of rear lamps during service intervals helps catch socket degradation early and avoids driving with a non‑working rear light.</p>
]]></content:encoded>
					
		
		
			</item>
		<item>
		<title>Lighting Citroën C1 Peugeot 107 81270-020 6340E2</title>
		<link>https://www.usedpartsvendor.com/body/headlights/c1-i-headlights/lighting-citroen-c1-peugeot-107-81270-020-6340e2/</link>
		
		<dc:creator><![CDATA[]]></dc:creator>
		<pubDate>Thu, 02 Oct 2025 02:19:27 +0000</pubDate>
				<guid isPermaLink="false">https://www.usedpartsvendor.com/uncategorized/lighting-citroen-c1-peugeot-107-81270-020-6340e2/</guid>

					<description><![CDATA[Dog Citroen Peugeot
81270-020 6340E2]]></description>
										<content:encoded><![CDATA[<p>Lighting Citroën C1 Peugeot 107</p>
<p>Lighting of the license plate (registration mark lighting) for the Citroën C1 and Peugeot 107. This is an original used part that replaces a damaged or oxidized lamp and restores the correct visibility and legal function of the Submitting of the Civil Code. With accurate OE codes 81270-020 and 6340E2, you can easily verify compatibility with your car.</p>
<p>The original design ensures the correct light scattering, weather resistance and trouble -free mounting into the original handles. Compared to universal substitutes, they sit exactly in the opening in the lid of the fifth door and use the original connector and seals.</p>
<p>The component is designed for the first generation Citroën C1 and Peugeot 107. On these cars are usually two same lamps above the registration sign &#8211; the left and right side are the same. They typically use the W5W (T10) 12 V 5 W in the base and two -meter electrical connection.</p>
<p>The replacement is fast and you can handle it without a jack: open the fifth door, carefully release the lamp latches and pull it out, disconnect the 2 -pin connector, transfer the W5W bulb (if right) into the new lamp, plug the connector and click the part back. After mounting, we recommend checking the function of both lamps and the condition of the seal.</p>
<p>Typical symptoms of defect: darkening or flashing of lighting, corrosion of contacts, cracked views or broken paws. It is often enough to replace the whole lamp &#8211; it is a faster and more reliable solution than repairing damaged brackets. For even appearance and light, both sides commonly change simultaneously.</p>
<p><strong> technical information </strong></p>
<ul>
<li> <strong> manufacturer: </strong> dog (Citroën/Peugeot); Cross OE Code Toyota </li>
<li> <strong> Model: </strong> Citroën C1 I (2005–2014), Peugeot 107 (2005–2014) </li>
<li> <strong> product codes: </strong> 6340e2 (PSA), 81270-0H020 (OE) </li>
<li> <strong> Additional numbers: </strong> 6340.e2, 6340 E2, 812700H020 </li>
</ul>
<p>Mounting tip: Clean the bearing surface before clinging and check the seals so that it does not flow into the fifth door space. Use the right type (W5W/T10) and 5 W power for homologation and lifetime.</p>
]]></content:encoded>
					
		
		
			</item>
		<item>
		<title>Used Third Brake Light for Citroën C1, Peugeot 107 — 1606372780</title>
		<link>https://www.usedpartsvendor.com/body/headlights/c1-i-headlights/third-brake-light-used-citroen-c1-peugeot-107-1606372780-2/</link>
		
		<dc:creator><![CDATA[]]></dc:creator>
		<pubDate>Thu, 02 Oct 2025 02:00:56 +0000</pubDate>
				<guid isPermaLink="false">https://www.usedpartsvendor.com/uncategorized/third-brake-light-used-citroen-c1-peugeot-107-1606372780-2/</guid>

					<description><![CDATA[Stellantis Citroën Peugeot
1606372780 6351W4
This is a used part, the rubber seal may leak and may need to be sealed with silicone]]></description>
										<content:encoded><![CDATA[<p>Third brake light with washer nozzle for Citroën C1, Peugeot 107 and Toyota Aygo. This is a used part; the rubber seal may leak, in which case it needs to be sealed with silicone.</p>
<h3>Product Overview</h3>
<p>High-mounted third brake light (center high-mounted stop lamp) with integrated washer jet, suitable for hatchback models Citroën C1, Peugeot 107 and Toyota Aygo. This used assembly is an economical replacement for a damaged or non-functioning third brake light and is often searched by part numbers 1606372780 and 6351W4, making it easy to find via Google or parts catalogs.</p>
<h3>Function And Benefits</h3>
<p>The third brake light provides an additional, elevated stop lamp that improves visibility to drivers behind the vehicle and helps reduce rear-end collisions. The integrated washer nozzle keeps the lens clean for maximum light output. Replacing a faulty unit restores legal compliance and safety while maintaining factory appearance.</p>
<h3>Compatibility And Typical Applications</h3>
<p>Fits Citroën C1, Peugeot 107 and Toyota Aygo (first-generation hatchbacks). Many buyers search by OEM codes 1606372780 or 6351W4 when looking for this specific unit.</p>
<h3>How To Replace</h3>
<p>Replacement is straightforward for experienced DIYers and professional mechanics. Typical steps:</p>
<ul>
<li>Open the rear hatch and remove the interior trim panel covering the upper tailgate area.</li>
<li>Disconnect the electrical connector for the third brake light and washer nozzle.</li>
<li>Remove the fasteners (clips/screws) securing the lamp assembly to the tailgate.</li>
<li>Carefully remove the old unit from the tailgate, transfer any needed grommets or trim, and inspect the mounting surface.</li>
<li>Fit the replacement unit, ensuring the rubber seal sits evenly. If the seal shows gaps or damage, apply a suitable silicone sealant to prevent leaks.</li>
<li>Reconnect the electrical plug, test the brake light and washer nozzle function, then reassemble the trim.</li>
<p>Recommended For: Mechanics and competent DIY enthusiasts. Use proper trim tools to avoid damaging interior panels.</p>
<h3>Installation Recommendations</h3>
<ul>
<li>Inspect The Rubber Seal: Because this is a used part, carefully check the rubber gasket for hardening or cuts. If the seal leaks, apply automotive-grade silicone to ensure watertight installation.</li>
<li>Electrical Check: Verify that the brake lamp filament/LED and washer nozzle operate before final assembly.</li>
<li>Careful Handling: Avoid touching the lamp lens with abrasive materials; preserve the paint and trim when removing and refitting panels.</li>
<li>Use Proper Tools: Trim removal tools reduce risk of broken clips and scratched panels.</li>
</ul>
<h3>Why This Part Fails</h3>
<p>The most common causes of failure are water ingress due to degraded or misaligned seals, impact damage from rear collisions, and electrical connector corrosion. Washer nozzle blockages or damage can also reduce cleaning effectiveness, causing a dirty lens and reduced light output. As this is a used unit, prior age and exposure to the elements increase the chance of leaks or worn seals.</p>
<h3>Technical Information</h3>
<ul>
<li>Manufacturer: Stellantis</li>
<li>Model: Citroën C1, Peugeot 107, Toyota Aygo</li>
<li>Product Codes: 1606372780</li>
<li>Additional Numbers: 6351W4</li>
</ul>
<h3>Notes For Buyers</h3>
<p>This item is a used original equipment part. Carefully review the photos (if provided) and inspect the rubber seal condition upon receipt. Re-sealing may be required to guarantee watertight fit. Searching by the OEM codes 1606372780 or 6351W4 will help you quickly confirm fitment for compatible vehicles.</p>
]]></content:encoded>
					
		
		
			</item>
		<item>
		<title>Right Rear Tail Light Peugeot 107 6351X6</title>
		<link>https://www.usedpartsvendor.com/body/headlights/c1-i-headlights/right-rear-lamp-peugeot-107-6351x6-2/</link>
		
		<dc:creator><![CDATA[]]></dc:creator>
		<pubDate>Tue, 25 Mar 2025 03:02:24 +0000</pubDate>
				<guid isPermaLink="false">https://www.usedpartsvendor.com/uncategorized/right-rear-lamp-peugeot-107-6351x6-2/</guid>

					<description><![CDATA[Stellantis Citroën Peugeot
6351X6]]></description>
										<content:encoded><![CDATA[<p>Right rear tail light for PEUGEOT 107 up to 2012. Without bulb sockets; bulbs can be purchased separately. Can be used on Citroën C1. Passenger side.</p>
<p>Direct replacement right rear combination lamp for Peugeot 107 (model years up to 2012) and compatible Citroën C1 vehicles. Ideal for professional workshops and competent DIY mechanics looking for a correct-fit, OE-style lighting unit. Frequently searched under part number 6351X6, this lamp restores rear position, stop and indicator visibility (depending on vehicle specification). Supplied without bulb sockets—order bulbs or holders separately to complete the repair.</p>
<h3>Installation</h3>
<p>Typical replacement is straightforward: open the boot, remove the inner trim or access panel to reveal the lamp retaining screws, unscrew the fasteners, disconnect the electrical connector, remove the old unit and refit the new lamp in reverse order. Check alignment of mounting tabs and hand-tighten fasteners before final torque. After installation, test all light functions (tail, brake, indicator/reverse if applicable) before reassembling trim.</p>
<h3>Technical Information</h3>
<ul>
<li>Manufacturer: Stellantis</li>
<li>Model: Peugeot 107; Compatible With: Citroën C1</li>
<li>Product Codes: 6351X6</li>
<li>Other Numbers: No additional references provided</li>
</ul>
<h3>Installation Recommendations</h3>
<ul>
<li>Work in a dry, well-lit area and keep fasteners and trim clips organized.</li>
<li>Disconnect the negative battery terminal or ensure electrical circuits are inactive when handling connectors to avoid short circuits and accidental activation.</li>
<li>Replace bulb sockets or bulbs if corroded or worn; a faulty socket can cause intermittent function even with a new lamp.</li>
<li>Ensure sealing surfaces are clean and that gaskets are correctly positioned to prevent water ingress.</li>
<li>Test all lamp functions after installation and secure trim to avoid rattles or stress on mounting tabs.</li>
</ul>
<h3>Why This Part Fails Most Often</h3>
<ul>
<li>Impact Damage: Minor collisions or bumps commonly crack the lens or break mounting tabs.</li>
<li>Water Ingress And Corrosion: Failed seals or damaged gaskets allow moisture in, causing corrosion of sockets and connectors or condensation inside the lamp.</li>
<li>Socket Or Connector Wear: Heat cycles and corrosion can degrade bulb holders and electrical contacts, leading to flicker or loss of function.</li>
<li>Plastic Fatigue: Repeated removal/installation or exposure to UV can make mounting points brittle and prone to breakage.</li>
</ul>
<h3>Notes For Buyers</h3>
<p>This unit is supplied without bulb sockets; verify the required bulb types and holders for your vehicle before fitting. Popular search term for this product: Peugeot 107 right rear tail light 6351X6.</p>
]]></content:encoded>
					
		
		
			</item>
	</channel>
</rss>
