This left rear door limiter (door stop / door check strap) is a direct-fit replacement for Peugeot 207 vehicles and is frequently sought under the product numbers 15189580 and 9037C1. Constructed to withstand repeated opening and closing, it preserves door travel and prevents over-extension. Ideal for professional mechanics and DIY enthusiasts who need an OEM-style part to restore correct door behaviour after wear, minor impact or corrosion.

Technical Information

• Manufacturer: Peugeot (Stellantis)
• Model: Peugeot 207
• Product Codes: 15189580, 9037C1
• Additional Numbers: ETSC, Paint Grey Cendré

Installation Recommendations

• Prepare Tools: Basic hand tools (Torx/sockets), trim removal tools and a torque wrench.
• Access: Open the rear left door fully and, if needed, remove the inner door trim to access the limiter mounting bolts and any retaining clips.
• Support: Support the door to avoid unwanted movement while removing the fasteners.
• Removal: Unscrew the limiter fasteners (retain bolts for reuse if undamaged) and gently pull the limiter free from its mounts. Note mounting orientation to install the new unit correctly.
• Installation: Fit the replacement limiter in the same position, align mounting holes and tighten fasteners to the manufacturer’s recommended torque values where available. Check free movement and door catch points before reassembling trim.
• Final Checks: Open and close the door several times to confirm smooth operation, correct stopping points and absence of binding. Lubricate pivot points with appropriate grease if necessary.

Why This Part Fails Most Often

• Wear And Fatigue: Repeated cycles of opening and closing cause mechanical wear of the pivot and detent surfaces.
• Corrosion: Exposure to moisture and road salt can corrode metal components or fasteners, leading to stiffness or failure.
• Impact Damage: Door impacts or heavy slamming can bend or break the limiter or its mounting points.
• Fastener Failure: Stripped or seized bolts and damaged threads prevent correct mounting and can lead to premature failure.

Particularly useful when customers search by OE numbers 15189580 or 9037C1. The unit supplied matches the colour designation ETS – Grey Cendré and was removed from a Peugeot 207 with 46,000 km on the clock.

Part description

This left front door stop for Peugeot 207 serves to continuously limit the opening of the doors and to hold them in typical positions. It helps protect the hinges and the door itself from excessive stress (e.g. during sudden opening or a gust of wind) and contributes to the safe operation of the door without unwanted noises and “skipping”.

The part is from a low mileage car and is listed as solid and tested. For used stops, it is essential that they have the right stiffness and are not squeezed in the joints – these are exactly the properties that you will feel the most in practice during replacement.

Technical information

• Manufacturer: Stellantis Citroën Peugeot
• Model: Peugeot 207
• Other numbers: ETSC, 15589080

• Type of part: stop / door limiter
• Side: left front door
• Color: ETS – Cendre gray lacquer

Product codes

• Product codes: 23709080, 9035T5

Installation recommendations

Generally/typically replacing a door stop is mechanical work in the door and A-pillar area. The exact design may vary depending on the specific design of the car.

1) Before assembly (checks of used part)

• Compare the new stop with the old piece: shape, length, fit, orientation and markings/codes (if visible).
• Check that the stop is firm, without excessive play in the joints and without cracks or deformations.
• Check the condition of the mounting holes/pins – they must not be squeezed out.

2) Necessary tools and materials (in general)

• Normal set of gola/ratchet and attachments, or bits depending on the used connecting material
• Pry bar/plastic pry bar for removing covers or upholstery (if access is obstructed)
• Door support or helper to secure the door in the open position
• Work gloves, possibly cleaning agent for degreasing

3) Step-by-step assembly procedure

1. Secure the vehicle against movement and open the door to a stable position.
2. Support the door or get a helper – manipulating the stop can change the stability of the open door.
3. If it obstructs access, remove the relevant covers/section of upholstery in the area where the stop is attached (careful not to damage the clips).
4. Release the fasteners of the stop on the side of the door.
5. Release the stop fasteners on the body side.
6. Remove the old stop and check the contact surfaces (corrosion, dirt, bruises).
7. Clean the mating surfaces and threads (if dirty) so that the stop fits without tension.
8. Insert the stop in the correct position and first lightly clamp it on one side (without final tightening).
9. Attach the other side of the stop and check that the stop does not conflict with the position of the door and nothing twists.
10. Tighten the fasteners gradually and evenly.
11. Perform the opening/closing of the door several times and observe the fluidity of the operation and holding in the positions.
12. Reinstall the removed covers/upholstery and double check that nothing rubs anywhere.
• 4) Post-assembly checks and functional test verification
  • Check that the door opens smoothly, without metallic sounds and without “skipping”.
  • Verify that the stop actually restricts opening and the door holds in typical positions.
  • Inspect the fasteners for loosening and the stop for play.

  5) The most common assembly mistakes + how to avoid them

  • Unsecured door: there is a risk of switching the stop or damaging the hinge – always support the door.
  • Ignoring play: if there is play in the mounting, the door will click – check the stop and the mounting before assembly.
  • Assembly “by force”: the stop must sit without tension; check the orientation and contact surfaces for resistance.

  Reasons why the part is damaged

  • Frequent sudden opening of the door and reaching the stop (mechanical overload).
  • Gusts of wind, when the door is “torn” to the extreme position.
  • Wearing of joints and friction parts – formation of backlash, clicking and irregular operation.
  • Corrosion and dirt in the mechanism (mainly for cars operated in demanding conditions).
  • Damage after an accident or after hitting the door/hinge, when misalignment occurs and the stop is stressed off-axis.
  ]]> https://www.usedpartsvendor.com/body/door-stops/207-door-stops/stopping-the-right-front-door-of-the-ewp-peugeot-207-26308980-9035t4/ Thu, 19 Jun 2025 02:09:09 +0000 https://www.usedpartsvendor.com/uncategorized/stopping-the-right-front-door-of-the-ewp-peugeot-207-26308980-9035t4/ Door Stopper – Right Front Door Limit for PEUGEOT 207
  Originates from a vehicle with 42,000 km mileage
  Color: EWP – White Banquise Paint
  Durable and tested for reliability

  Are you looking for a dependable door stopper for the right front door of your Peugeot 207? This original part from a vehicle with only 42,000 km ensures long-lasting performance. It holds your car door securely in place, preventing damage and unwanted noises while driving or parking.

  Technical Information:

  Manufacturer: PSA Citroen Peugeot
  Model: PEUGEOT 207
  Product Codes: 26308980, 14788980, 9035T4
  Additional Numbers: EWP – White Banquise Paint

  This component meets the quality and functional requirements for Peugeot 207. Proper door securing with this stopper reduces wear on door mechanisms, especially with frequent use. Verify compatibility with your vehicle using the product codes provided.

  If you are a professional mechanic or perform your own repairs, you’ll appreciate the straightforward installation using common tools. Replacing the old door stopper with this one enhances door appearance and prolongs the life of related door components.

  This auto part is essential for the proper operation and safety of your Peugeot 207’s door. Maintaining it in excellent condition will improve driving comfort and protect your vehicle from potential door damage.

  ]]> https://www.usedpartsvendor.com/body/door-stops/207-door-stops/stopping-left-rear-door-ewp-peugeot-207-15189580-9037c1/ Thu, 19 Jun 2025 02:09:09 +0000 https://www.usedpartsvendor.com/uncategorized/stopping-left-rear-door-ewp-peugeot-207-15189580-9037c1/ Left Rear Door Hinge Stop for PEUGEOT 207
  Originally fitted on a vehicle with 42,000 km mileage
  Color: EWP – Banquise White Lacquer
  Solid and reliable construction

  Looking for dependable spare parts for your PEUGEOT 207? This left rear door hinge stop is an original part removed from a vehicle with only 42,000 km and is essential to maintain the functionality and safety of your car. This component ensures the correct and safe opening and closing of the left rear door, which is especially important to protect the interior from damage caused by sudden door movements.

  Technical Information

  Manufacturer: PEUGEOT
  Model: 207
  Product Codes: 15189580, 9037C1
  Additional Numbers: EWP (Banquise White Lacquer color)

  This auto part is carefully inspected and ready for installation. Its solid structure and quality guarantee long-term durability, making it ideal for replacing damaged or worn-out components. Installation of the hinge stop is relatively simple and can be performed independently with basic tools, appreciated by both professional mechanics and DIY enthusiasts. Regular maintenance and replacement of such parts help keep your vehicle in a safe and fully functional condition, improving drivability and enhancing safety during driving.

  No more worries about poor-quality parts or uncertainties when opening and closing your doors. With our left rear door hinge stop, you gain the reliability and assurance your PEUGEOT 207 requires. Order now to restore your vehicle’s original functionality and safety.

  ]]> https://www.usedpartsvendor.com/body/door-stops/207-door-stops/stopping-the-right-rear-door-of-the-ewp-peugeot-207-13089480-9037c0/ Thu, 19 Jun 2025 02:09:09 +0000 https://www.usedpartsvendor.com/uncategorized/stopping-the-right-rear-door-of-the-ewp-peugeot-207-13089480-9037c0/ Right Rear Door Hinge Stop For Peugeot 207
  Originates From A Vehicle With 42,000 Km Mileage
  Color EWP – Banquise White Paint Finish
  Sturdy And Reliable

  Finding reliable auto parts for your vehicle can be challenging, especially when searching for quality used components. The right rear door hinge stop for Peugeot 207 is an ideal solution for those wanting to maintain their vehicle’s original functionality and safety without investing in new parts.

  This part comes from a Peugeot 207 with 42,000 km and has been carefully checked to meet all quality and safety standards. Thanks to its white EWP color, it blends well with the exterior aesthetics of this popular model. The hinge stop is essential for the correct and safe operation of your car doors, helping to prevent body damage and ensuring doors open and close properly.

  Technical Information

  • Manufacturer: PSA Citroen Peugeot
  • Model: Peugeot 207
  • Product Codes: 13089480, 9037C0
  • Additional Numbers: EWP

  Replacing the hinge stop is generally a straightforward task that can be done independently or with the help of a professional mechanic. Regular inspection and replacement of worn or damaged parts like this one increase the lifespan of other door components and reduce the risk of more expensive repairs in the future.

  If you are looking for a reliable and cost-effective way to keep your vehicle’s doors safe and functional, this used right rear door hinge stop for Peugeot 207 is an excellent choice. Give your car the parts it deserves and enjoy peace of mind with quality used auto parts.

  ]]> https://www.usedpartsvendor.com/body/door-stops/207-door-stops/right-rear-door-hinge-stop-peugeot-207-25109480-9037c0/ Sat, 15 Mar 2025 03:21:58 +0000 https://www.usedpartsvendor.com/uncategorized/right-rear-door-hinge-stop-peugeot-207-25109480-9037c0/ The Right Rear Door Stopper for PEUGEOT 207 is an essential component for maintaining the functionality of your vehicle’s rear door. This durable part acts as a limiter, preventing the door from opening too far and causing damage to the door or the body of the vehicle. Over time, door stoppers can wear out due to constant use and exposure to weather elements, resulting in less effective operation.

  Replacing the door stopper is a straightforward process that can be done by both professional mechanics and DIY enthusiasts. It usually requires removing the door panel to access the existing stopper, followed by securing the new component in place. Regular inspections of the door mechanism can help identify when it’s time for a replacement.

  Technical Information

  • Manufacturer: PEUGEOT
  • Model: 207
  • Product Codes: 25109480, 9037C0
  • Additional Numbers: Not available

  Ensure your PEUGEOT 207 operates smoothly with this reliable Right Rear Door Stopper, designed specifically for vehicles in this model range.

  ]]> https://www.usedpartsvendor.com/body/door-stops/207-door-stops/left-rear-door-hinge-stop-peugeot-207-25009580-9037c1/ Sat, 15 Mar 2025 03:21:58 +0000 https://www.usedpartsvendor.com/uncategorized/left-rear-door-hinge-stop-peugeot-207-25009580-9037c1/ Enhance the functionality of your PEUGEOT 207 with the premium Door Stopper for Left Rear Door. This vital component is designed to ensure that your rear door opens and closes smoothly, providing convenience and security while maintaining the aesthetic integrity of your vehicle.

  With product numbers 25009580 and 9037C1, this door stopper is a perfect fit for PEUGEOT 207 models. It effectively limits the door’s swing, preventing accidental damage to the bodywork and enhancing user safety. Accumulated wear and tear or physical damage can lead to the failure of this part, often seen in older models due to regular use and environmental factors.

  Replacing the door stopper is straightforward and typically involves removing the old part and installing the new one using a few basic tools. It is advisable to check your door stoppers regularly for signs of wear to ensure that your vehicle remains in optimal condition.

  Technical Information

  • Manufacturer: PEUGEOT
  • Model: 207
  • Product Codes: 25009580, 9037C1
  • Other Numbers: N/A
  ]]> https://www.usedpartsvendor.com/body/door-stops/207-door-stops/right-front-door-hinge-stop-peugeot-207-26308980-9035t4/ Tue, 16 Jul 2024 04:07:28 +0000 https://www.usedpartsvendor.com/uncategorized/right-front-door-hinge-stop-peugeot-207-26308980-9035t4/ Stop Hinge for the Right Front Door of Peugeot 207
  Fixed and reliable component designed for optimal door operation and protection.

  If you are a mechanic or enjoy repairing your car yourself, this genuine Peugeot door stop hinge is an excellent choice for replacing the original worn or damaged part. It prevents the door from opening too far, protecting both the vehicle bodywork and the door itself from impact damage.

  Although door stop hinges are durable components, exposure to extreme conditions or frequent use may cause wear or damage over time. Replacing this component is crucial maintenance to ensure your Peugeot 207’s doors function smoothly and safely every day.

  Technical Information:

  Manufacturer: PSA Citroen Peugeot
  Model: Peugeot 207
  Product Codes: 26308980, 14788980, 9035T4
  Additional Numbers: Stop Hinge Right Front Door

  Our used auto parts for Citroen and Peugeot vehicles provide a cost-effective alternative to new components and are perfect for mechanics and DIY enthusiasts aiming to keep their vehicles in optimal condition without investing in expensive replacements. Each item is carefully inspected to ensure full functionality.

  Take advantage of our extensive range of auto parts and manage your vehicle maintenance confidently, knowing you have selected quality components that guarantee a safe and reliable operation of your Peugeot 207.

  ]]> https://www.usedpartsvendor.com/body/door-stops/207-door-stops/left-rear-door-hinge-stop-peugeot-207-15189580-9037c1/ Sat, 22 Jun 2024 04:05:32 +0000 https://www.usedpartsvendor.com/uncategorized/left-rear-door-hinge-stop-peugeot-207-15189580-9037c1/ Product Overview

  The Door Stop for the Left Rear Door of the Peugeot 207 is a vital component designed to maintain the safety and proper functionality of your vehicle’s rear door system. This sturdy door stopper ensures the left rear door opens and closes correctly, preventing accidental or uncontrolled door movements either during driving or when parked.

  Constructed with durability in mind, this high-quality door stop offers reliable performance and longevity. Despite being a used part, it remains in excellent condition, ready for immediate installation and continued service in your Peugeot 207.

  Technical Information

  • Manufacturer: PSA Peugeot Citroen
  • Model: Peugeot 207
  • Product Codes: 15189580, 9037C1

  Function and Replacement Details

  This door stop plays a crucial role in preserving the structural integrity of your vehicle by protecting both external and internal components from damage caused by unexpected door movement. Replacement is typically straightforward and should be conducted by a qualified technician to guarantee proper fit and function.

  As an essential part for the correct and safe operation of the left rear door in the Peugeot 207, this door stop is perfect for professional mechanics and car enthusiasts performing their own repairs. Accurate product codes make searching and ordering fast and hassle-free.

  Secure this reliable replacement part and keep your Peugeot 207 doors operating smoothly and safely with confidence.

  ]]> https://www.usedpartsvendor.com/body/door-stops/207-door-stops/right-rear-door-hinge-stop-peugeot-207-13089480-9037c0/ Sat, 22 Jun 2024 04:05:32 +0000 https://www.usedpartsvendor.com/uncategorized/right-rear-door-hinge-stop-peugeot-207-13089480-9037c0/ Door Stop – Limiter for Right Rear Door PEUGEOT 207
  This durable door stop is designed specifically for the right rear door of the PEUGEOT 207. It ensures that the door opens and closes smoothly, providing a reliable solution for your vehicle’s functionality.

  As a common component that may wear out over time due to frequent use, it is recommended to replace your door stop if you notice any resistance or difficulty in opening and closing your door. Regular maintenance helps ensure the longevity of your vehicle’s door mechanism and prevents potential damage.

  Technical Information

  • Manufacturer: PSA
  • Model: PEUGEOT 207
  • Product Codes: 13089480
  • Additional Numbers: 9037C0
  ]]>