Product Overview

This exterior door handle is an aftermarket replacement designed for Citroën and Peugeot models, supplied in KGQ Kyanos Blue. Commonly referenced by part code 9101GH (KGQC), it is intended for use on left rear and right front/right rear doors depending on vehicle configuration. The robust design matches the exterior finish and mounting points of the original part to ensure proper fit and appearance. Ideal for professional workshops and DIY mechanics looking for a direct-fit, color-matched replacement.

Technical Information

• Manufacturer: Stellantis / Citroën & Peugeot
• Model: Various Citroën And Peugeot Models (See Fitment)
• Product Codes: 9101GH, KGQC
• Additional Numbers: Not Specified

Fitment

Compatible with a range of B‑segment and compact models from Citroën and Peugeot, including but not limited to:

• Peugeot 2008
• Peugeot 207
• Peugeot 308
• Peugeot Partner / Partner Tepee
• Citroën Berlingo (B9)
• Citroën C4 II / C4 Picasso
• Citroën/Peugeot Jumpy III / Expert III

Function

The door handle provides manual actuation of the door latch and integrates with the door’s locking mechanism. It transmits the user’s mechanical input to the latch assembly via linkages or cables and must maintain correct alignment and smooth movement to ensure reliable opening and locking.

Most Common Failure Causes

• Mechanical Wear: Repeated use can wear pivot points, weakening plastic clips or levers until they break.
• Impact Damage: Door hits, parking incidents, or forced entry attempts can deform or crack the handle.
• Corrosion And Environmental Damage: Salt, moisture and dirt ingress can seize linkages or corrode metal fixing points.
• Paint Fading Or Scuffs: Exterior exposure may affect the finish, especially on color‑matched parts.
• Internal Mechanism Failure: Linkage bushings, springs or the latch interface can fail, making the handle feel loose or non‑functional.

Mounting Recommendations

Follow these practical steps to replace the door handle safely and ensure long service life:

• Prepare Tools: Typical tools include trim removal tools, Torx or Phillips drivers, socket set and pliers.
• Remove Door Trim Carefully: Use proper trim tools to avoid breaking clips. Detach the inner door panel to access the handle retaining bolts and linkages.
• Disconnect Linkages: Note the orientation of rods and clips. Remove retaining clips gently to avoid damage.
• Fit Replacement: Align the new handle to the mounting points and secure fasteners to the manufacturer’s recommended torque where available.
• Reconnect And Test: Reattach linkages and test door operation (open, close, lock, and unlock) before refitting the door panel.
• Lubricate Moving Parts: Apply suitable grease to pivot points and linkages to reduce wear and prevent noise.
• Check Finish And Gaps: Ensure the handle sits flush and the paint match meets aesthetic expectations.

Advice For Installers

For professional fitment: Inspect the latch and internal linkages for wear when replacing the handle. Replace damaged clips or worn linkage components at the same time to avoid repeat visits. Keep spare retaining clips on hand—these are a common failure point during disassembly.

Why Replace This Part

Replacing a worn or broken door handle restores proper door operation and security, prevents further damage to the latch assembly, and keeps the vehicle exterior appearance factory‑correct when matched in KGQ Kyanos Blue. For technicians and DIYers, using a correct-fit handle with the right color code reduces rework and improves customer satisfaction.

Description

OEM-fit Exterior Door Handle Designed For Peugeot 3008 I And 5008 I. This painted left front driver door handle (part codes 9101KJ / EPYD) replaces the worn or damaged original and restores correct operation and appearance. The unit is finished in Ruby Red paint (color code EPY) for a factory-matched look. Ideal For Professional Workshops And DIY Mechanics Who Need A Direct-Fit, Ready-To-Install Replacement.

Technical Information

• Manufacturer: Stellantis / Peugeot
• Model: Peugeot 3008 I, Peugeot 5008 I (First Generation)
• Product Codes: 9101KJ, EPYD
• Other Numbers: Color Code EPY – Ruby Red

Installation Recommendation

Designed For Fast Replacement In A Workshop Environment. Typical Replacement Steps:

• Remove Interior Door Trim Using Proper Trim Tools To Avoid Damaging Clips And Upholstery.
• Disconnect Any Linkages, Cables Or Electrical Connectors Associated With The Handle Or Central Locking.
• Unscrew And Remove The Old Handle Assembly From The Exterior Mounting Points.
• Fit The New Handle, Ensure Correct Engagement Of The Locking Mechanism And Linkages, Then Tighten Fasteners To Manufacturer Specifications.
• Reconnect Electrical Connectors Where Present, Refit The Door Trim And Test Locking, Latching And Handle Movement Several Times.

Use Appropriate Trim Tools And Torque Settings. Protect Painted Surfaces During Installation And Verify Smooth Operation Before Finishing.

Most Common Failure Reasons

• Mechanical Wear: Frequent Use Causes Internal Levers Or Sprung Clips To Wear Or Break.
• Impact Damage: Parking Impacts Or Attempts At Forced Entry Can Crack The Handle Or Break Mounting Points.
• Environmental Degradation: UV Exposure And Temperature Cycles Lead To Paint Fading And Plastic Brittle Failure Of Clips.
• Corrosion: Metal Components And Fasteners Can Corrode, Especially In Regions With Road Salt, Leading To Stiff Or Jammed Operation.
• Paint Damage: Chips From Stones Or Keys Can Expose Underlying Material, Accelerating Wear And Rust.

Remarks

This Part Offers A Direct-Replacement Fit For Vehicles Specified Above. Because Exterior Paint Tone Can Vary Over Time Due To Sun Exposure, New Painted Handles May Show Slight Shade Differences Compared To Aged Panels. Inspect Mounting Points And Linkages During Replacement To Ensure Long-Term Reliability.

Exterior door handle for Peugeot 3008 I and 5008 I in Ruby Red (EPY). Ideal for professional workshops and DIY mechanics searching by part code 9101KH or EPYD. This replacement outer handle restores door opening function and appearance while matching factory paint. Suitable for vehicles with mechanical or central-locking actuation; ensure compatibility with your door lock cylinder arrangement before installation.

Key Benefits

Durable exterior finish matched to factory Ruby Red paint. Direct-fit design for clean installation, reduces installation time in bodyshop and garage settings. Restores proper latch actuation and prevents water ingress around the handle area when fitted correctly.

Technical Information

• Manufacturer: Stellantis / Peugeot
• Model(s): Peugeot 3008 I, Peugeot 5008 I (First Generation)
• Product Codes: 9101KH, EPYD
• Other Numbers: Color Code EPY – Ruby Red

Fitment

Specifically produced for the right front door and both left and right rear doors on first-generation Peugeot 3008 and 5008 models. Check side and door position when ordering (Right Hand Drive vs Left Hand Drive does not affect side designation for the handle itself).

How To Replace (Overview)

1. Remove interior door trim: unscrew fasteners and carefully pry trim clips to avoid damage.
2. Peel back the waterproof membrane to access the inner door shell.
3. Disconnect any electrical connectors if the handle has sensors or switches.
4. Unbolt or unclip the handle from the inside of the door. Detach linkage rods from the latch mechanism.
5. Transfer lock cylinder or trim pieces if required, then fit the new handle and reconnect linkage.
6. Test mechanical movement and central locking operation before reassembling the door panel.
7. Reattach the waterproof membrane and interior trim, ensuring all clips and screws are secure.

Mounting Recommendations

Work On A Flat Surface And Keep Parts Organized. Use Proper Trim Tools To Avoid Breakage Of Clips. Lubricate Moving Linkages With Suitable Grease (e.g., White Lithium) To Prevent Stiff Operation. Tighten Fasteners Evenly Without Over-Torquing; Replace Any Damaged Clips Or Gaskets To Maintain Water Tightness. After Installation, Check Door Alignment And Central Locking Function On All Doors.

Why This Part Most Commonly Fails

• Mechanical Wear: Frequent use leads to worn pivots or weakened plastic components inside the handle mechanism.
• Impact Damage: Door hits, parking lot knocks or forced entry attempts can crack the handle or break mounting tabs.
• Corrosion And Environmental Stress: Salt, moisture and dirt can corrode metal linkages or cause paint and seal deterioration—more common in colder climates.
• Broken Clips And Fasteners: Interior mounting clips are often plastic and can fail during previous repairs or from vibration over time.

Notes

When replacing, compare the part codes printed on the old handle to the Product Codes listed above (9101KH / EPYD) and confirm color code EPY for paint match. Professional installation is recommended for best fit and sealing, especially on vehicles with integrated central-locking switches or alarm sensors in the handle area.

Professional-quality exterior left front (driver side) door handle designed for Citroën C4, Citroën C6 and Peugeot 407 models. Finished in paint code KKQ (Red Profond), this replacement handle restores original appearance and function for vehicles fitted with the matching color. Ideal for mechanics and DIY enthusiasts looking for a direct-fit, visually matched part. Commonly searched by part number 9101EP or code KKQD.

Key Features

– Direct-fit replacement for the left front driver’s door exterior handle.
– Painted to match KKQ (Red Profond) finish for seamless repair of visible bodywork.
– Suited for vehicles in the Citroën/Peugeot family where this handle and color were originally specified.
– Robust construction for repeated daily use; designed to interface with factory locking and latch mechanisms.

Technical Information

• Manufacturer: Stellantis (Citroën / Peugeot)
• Model: Citroën C4, Citroën C6, Peugeot 407
• Product Codes: 9101EP, KKQD
• Additional Numbers: Color Code KKQ (Red Profond)

Function And Fitment Notes

The exterior door handle operates the latch mechanism via internal linkages or rods and works together with the central locking and, where fitted, the lock cylinder. It provides the primary manual release of the door from the outside. Fitment must match the vehicle’s door configuration (left/front) and paint code for an exact visual match.

Replacement Procedure (Overview)

Recommended for competent technicians or experienced DIYers. Typical steps:

• Remove the interior door trim panel using plastic trim tools to avoid damage.
• Disconnect any electrical connectors for central locking or courtesy lights if present.
• Release the interior clips and remove the access cover to reach the handle retaining bolts or screws.
• Detach linkage rods from the old handle (note clip orientations) and remove the retaining fasteners.
• Fit the new handle, reconnect linkage rods and electrical connectors, then secure all fasteners to manufacturer torque specifications.
• Reinstall the door trim and check function of the handle, lock and central locking. Lubricate latch points with suitable grease if required.

Installation Recommendations

– Use trim removal tools to prevent panel damage.
– Keep track of small clips and screws; replace broken retaining clips if found.
– Test mechanical operation and central locking before finishing reassembly.
– If the handle includes or interfaces with a lock cylinder, ensure the cylinder is correctly aligned and operates smoothly.
– When working near airbags or wiring harnesses, follow vehicle manufacturer safety procedures (isolate battery where recommended by the manufacturer) and take appropriate precautions.

Most Common Reasons For Failure

Exterior door handles most frequently fail due to mechanical wear and tear, plastic clip or lever breakage, corrosion of internal components, impact damage (parking knocks or attempted forced entry), or long-term exposure to weather and road salts. Paint damage to the handle can also lead to accelerated surface degradation. Regular inspection and prompt replacement of broken clips or corroded linkages will extend service life.

Compatibility And Search Tips

Customers often search for this part by part number 9101EP or code KKQD and by model names Citroën C4, Citroën C6 and Peugeot 407. Ensure the color code (KKQ) and left front orientation match your vehicle before purchase to achieve a correct visual and mechanical fit.

Notes

This listing describes a painted left front driver’s exterior door handle intended as a replacement part. Verify fitment against the vehicle’s model and door orientation prior to installation.

Overview

This exterior door handle is designed for Citroën C4, Citroën C6 and Peugeot 407 models and carries the manufacturer/product identifiers used in searches: 9101ER and KKQD/KKQ. It provides a direct-fit replacement for worn or damaged handles, restoring proper door opening and locking function while matching the vehicle paint finish (KKQ Red Profond).

Key Benefits

• Direct Fit: Designed to match original mounting points and linkage for an easy replacement.
• Color Matched: Supplied in KKQ paint (Red Profond) to match factory finish and reduce the need for repainting.
• Durable Construction: Built to withstand repeated use and environmental exposure common to exterior fittings.
• Part Number Search Friendly: Commonly referenced by code 9101ER and KKQD, making it easy to locate for repairs.

Technical Information

• Manufacturer: Stellantis / Citroën / Peugeot
• Model: Citroën C4, Citroën C6, Peugeot 407
• Product Codes: 9101ER, KKQD
• Additional Numbers: Color KKQ – Paint Red Profond

Function

The external door handle provides the mechanical interface to unlatch the door from outside. It transfers motion via linkages or cables to the door latch mechanism and in some versions works together with the locking cylinder or electronic locking components to secure the door.

Installation Recommendations

• Prepare Tools: Remove inner door trim using appropriate trim tools to avoid damage to clips and panels.
• Disconnect Battery: For vehicles with electrical locking or sensors, disconnect the battery before starting to prevent short circuits.
• Access Latch Area: Peel back vapor barrier carefully to access handle fixings, linkage rods or cables, and any electrical connectors.
• Remove Fixings: Unscrew retaining bolts/screws and unclip linkage/cable from the old handle. Keep track of small clips and washers.
• Fit New Handle: Install the new handle, reconnect linkage and any electrical connectors, and secure all fasteners to the original torque where applicable.
• Function Check: Before reassembling the door trim, test opening/locking from outside and inside to ensure smooth operation and correct alignment.
• Reassembly: Refit vapor barrier and inner trim, ensuring all clips are engaged and seals are intact to prevent water ingress.

Most Common Reasons For Failure

• Mechanical Wear: Repeated use leads to wear of pivot points, plastic tabs or metal linkages, eventually causing play or breakage.
• Corrosion: Moisture ingress and salt exposure can corrode metal parts or seize moving joints, especially in older vehicles.
• Impact Damage: Door impacts or attempts to force the door open can crack or deform the handle housing.
• Broken Clips Or Linkages: Plastic retaining clips and connectors can become brittle over time and fail during normal operation or removal.
• Paint Damage: Fading or chipping of the painted surface (KKQ) from environmental exposure or abrasion.

Compatibility And Search Tips

This part is frequently searched by product codes 9101ER and KKQD/KKQ. Verify vehicle model and door side (right front, right rear, left rear) when ordering to ensure correct fit. It is intended as a direct replacement for the listed Citroën and Peugeot models and is ideal for professional technicians and DIY enthusiasts carrying out bodywork or latch repairs.

This used left front exterior door handle is designed for Citroën C3 II (A51) and DS3 models and is commonly referenced under code 9101KY. Ideal for professional mechanics and DIY enthusiasts, the part restores reliable opening and secure locking of the driver door. The unit features a keyhole for manual cylinder access and a grey chiné finish that matches many interior/exterior trim variants. Replacing a worn or broken handle is a cost-effective repair that returns proper function and improves vehicle appearance.

Technical Information

• Manufacturer: Stellantis / Citroën / Peugeot
• Model: Citroën C3 II (A51); DS3
• Product Codes: 9101KY
• Other Numbers: A51
• Color/Finish: HVD Color – Grey Chiné Trim
• Position: Left Front (Driver’s Door)
• Features: With Keyhole

Installation Recommendation

Fitment is straightforward for experienced technicians and competent DIYers. Typical replacement steps:

• Remove the inner door panel by releasing fasteners and plastic clips to access the handle mechanism.
• Disconnect the interior door release linkage and electrical connectors where present.
• Unscrew the retaining bolts or nuts securing the exterior handle to the door shell.
• Carefully withdraw the old handle, transferring the lock cylinder or trim pieces if required.
• Install the replacement handle, refit fasteners and reconnect linkages, ensuring smooth movement and correct engagement with the latch.
• Test door opening, locking and key operation before refitting the door panel and clips.

Tips: Use proper trim tools to avoid breaking door-panel clips. Keep fasteners and small parts organized during disassembly. If the lock cylinder is worn, consider transferring or replacing it at the same time.

Why This Part Most Often Fails

• Material Fatigue: Plastic components and internal levers can crack or fracture over time, especially after repeated use.
• Wear Of Lock Cylinder: Keyhole mechanisms accumulate wear and dirt, causing stiff operation or failure to turn.
• Corrosion And Seizing: Moisture ingress and corrosion of metal linkages can prevent smooth operation.
• Impact Damage: Door impacts or attempted break-ins often deform or break the exterior handle assembly.
• Broken Clips Or Fasteners: Internal mounting clips can fail, causing loose or misaligned handles.

This replacement handle is often searched by its product code 9101KY. Compatible with the listed Citroën models and intended for those comfortable with standard door trim removal and assembly procedures.

This exterior door handle is a direct-fit replacement designed for Citroën C3 II (A51) and DS3 models. Ideal for professional workshops and DIY enthusiasts, the part restores reliable door access and lock operation while matching the interior trim thanks to the Grey Chine finish. Many customers search by product code 9101KZ, so this listing is optimized for quick findability and fast identification in parts catalogs.

Technical Information

• Manufacturer: Stellantis (Citroën/Peugeot)
• Model: Citroën C3 II (A51), DS3
• Product Codes: 9101KZ
• Additional Numbers: A51

Function And Compatibility

The door handle provides exterior access and transfers user input to the door latch mechanism via rods or cables. It is compatible with left rear and both right front and right rear doors on the specified Citroën C3 II (A51) and DS3 applications. The Grey Chine finish is matched to corresponding trim versions used in these models.

Replacement Procedure

Recommended For Experienced Mechanics And Capable DIYers. Typical Replacement Steps:

• Prepare Tools: Trim removal tools, Torx/Phillips screwdrivers, socket set, pliers, and suitable lighting.
• Remove Interior Door Trim: Carefully pry out trim clips and remove screws to lower the door card without damaging clips or upholstery.
• Access Handle Mechanism: Peel back the moisture barrier and locate the handle fixing bolts, rods, and retaining clips.
• Disconnect Linkages: Unclip or detach the connecting rod or cable from the handle. Note the orientation for reassembly.
• Remove Old Handle: Unscrew the retaining bolts/screws and withdraw the handle from the exterior side of the door.
• Install New Handle: Position the replacement handle, secure fasteners to the correct torque, and reconnect rods/cables using original clip positions.
• Test Function: Before refitting the door card, operate the handle to confirm latch engagement, lock/unlock function, and smooth travel.
• Reassemble Door: Replace the moisture barrier, refit the door card and trim fasteners, and verify final operation and alignment.

Installation Recommendations

• Perform Work On A Stable Surface With The Door Fully Supported To Avoid Damage To Trim And Glass.
• Keep Fasteners And Clips Organized; Replace Any Broken Clips To Ensure Secure Fitment.
• Lightly Lubricate The Latch Mechanism And Moving Linkages With A Suitable Grease To Prevent Noise And Wear.
• Check Door Alignment And Locking Operation After Installation; Adjust Linkage If There Is Excessive Play.
• Use Manufacturer-Appropriate Fastener Torque Where Specified.

Why This Part Most Commonly Fails

• Plastic Fatigue And Breakage: Internal levers and mounting tabs are commonly made from plastic that can crack or snap after repeated use, especially on older vehicles.
• Impact Damage: Door impacts, slamming, or vandalism can fracture the handle or bend its mounting points.
• Corrosion And Seizure: Metal linkages and fasteners exposed to moisture can corrode, causing increased load on the handle and eventual failure.
• Freezing And Ice: In cold climates, ice can lock the mechanism and lead to excessive force being applied to the handle when forced, causing breakage.
• Worn Clips Or Detached Rods: Retaining clips can wear or fall out, resulting in a handle that operates but does not actuate the latch.

Practical Tips

• If The Handle Feels Loose Or Exhibits Play, Inspect The Mounting Tabs And Support Clips First.
• When Replacing The Handle, Inspect The Connecting Rods/Cables And Replace Any Corroded Or Distorted Components To Avoid Repeat Repairs.
• Search By Product Code 9101KZ For Faster Identification In Parts Databases And Catalogs.

This exterior door handle is a direct-fit replacement for Peugeot 307 CC models and is suitable for both left and right sides. Finished in Babylone Red (LKR lacquer), it restores original appearance and reliable operation. Popular among professional mechanics and DIY enthusiasts, this part is often searched for by its product numbers 9651421577, 9651421477, 9647831280 and code 9101X2 — include these codes when searching to find exact matches fast. The handle is supplied functional and tested, making it a convenient choice for quick repairs or bodywork refinish jobs.

Technical Information

• Manufacturer: Stellantis / Peugeot
• Model: Peugeot 307 CC (Left And Right)
• Product Codes: 9651421577, 9651421477
• Additional Numbers: 9647831280, 9101X2, LKRD
• Color / Finish: Babylone Red (LKR) Lacquer
• Condition: Functional, Tested

Installation Recommendations

Recommended for experienced technicians and competent DIYers. Typical replacement requires removal of the inner door trim to access the handle fasteners and linkage. Follow these general steps:

• Open the door and raise the window to a safe position.
• Remove door trim panel and any moisture barriers carefully to avoid tearing clips or damaging upholstery.
• Disconnect the handle linkage and lock cylinder rods, noting their positions for reassembly.
• Unscrew the retaining nuts/bolts securing the handle from inside the door.
• Fit the new handle, reconnect linkage and check free movement of latch and lock.
• Reassemble the door trim, ensuring all clips and seals are correctly positioned.

Use appropriate hand tools and trim removers. Replace any broken clips or worn gaskets during reassembly to prevent rattles and water ingress. After installation, check locking/unlocking with remote and manual key where applicable, and verify smooth opening from both exterior and interior sides.

Reason For Failure

Exterior door handles typically fail due to mechanical wear or damage. Common causes include:

• Broken plastic tabs or internal levers caused by repeated use or excessive force.
• Corrosion of metal components or fasteners allowing parts to seize or break.
• Impact damage from minor collisions or door strikes.
• Degradation from prolonged sun exposure, leading to brittle plastics and cracked paint.
• Water ingress accelerating corrosion or causing linkage to bind.

Replacing a worn or damaged handle not only restores proper function but also improves the vehicle’s appearance and resale value. This handle is a practical choice for repair shops and independent mechanics seeking a tested, color-matched replacement. Order using the product codes for quickest identification and compatibility search.

High-quality exterior replacement door handle designed for mechanics and DIY enthusiasts who work on Citroën C1 and Peugeot 107 (first generation). This KWD-colored Lipizan White handle (product code 9101AK) restores function and appearance after mechanical damage or wear. Ideal for fast repairs in a workshop environment or home garage, the part is made to match factory fitment for a clean finish and reliable operation.

Key benefits include direct-fit installation for the left front door, OEM-style mounting points, and a painted finish to minimize visible color mismatch. Use this handle when the original shows cracks, broken mounting tabs, sticking operation, or when the exterior has been damaged in a minor collision.

Technical Information

• Manufacturer: Citroën / Peugeot (Stellantis)
• Model: Citroën C1, Peugeot 107 — First Generation (2005–2014)
• Product Codes: 9101AK
• Additional Numbers: Color Code KWD (Paint: Lipizan White)

Installation Recommendations

Replacement is straightforward for professional technicians and competent DIYers. Typical steps:

• Remove the interior door trim to access the handle mechanism and lock rods. Keep fasteners organized for reassembly.
• Disconnect linkage rods and any electrical connectors for central locking if present.
• Unscrew the retaining bolts or nuts securing the exterior handle from inside the door shell and carefully extract the old handle.
• Fit new handle, engage linkage rods and check smooth mechanical operation before tightening fasteners fully.
• Reinstall door trim and test door latch, locking, and central-locking functions. Adjust striker or linkage if necessary for smooth closing.

Tip: If the door incorporates an electrical lock actuator or sensors, protect connectors from damage and ensure correct routing of rods. Verify whether the lock cylinder is included with the part; replace or transfer the cylinder if required.

Why The Part Most Commonly Fails

• Mechanical Wear And Plastic Fatigue: Repeated use and exposure to the elements degrade plastic components and mounting tabs.
• Impact Damage: Minor collisions, door slams, or vandalism can crack the handle or break internal mounting points.
• Corrosion And Fastener Failure: Corrosion around bolts or inside the door may compromise secure mounting and lead to loosening or failure.
• Paint And Surface Deterioration: Exterior finish can flake or peel, prompting replacement for cosmetic reasons.

This door handle is a practical, cost-effective way to restore door operation and exterior appearance on Citroën C1 and Peugeot 107 first-generation vehicles. Use standard workshop tools for replacement and follow manufacturer guidance when adjusting door mechanisms.

This left rear exterior door handle is an OEM-fit replacement designed for Citroën C1 and Peugeot 107 models. Painted in Lipizan White (KWD), it restores original appearance after damage or wear and ensures correct alignment and smooth operation with the factory latch and locking linkage. Ideal for professional workshops and DIY mechanics who need a direct-fit part that is easy to install and matches the vehicle finish.

Technical Information

• Manufacturer: Stellantis (Citroën / Peugeot)
• Model: Citroën C1, Peugeot 107
• Product Codes: 9101AQ
• Other Numbers: KWD (Paint Code), Lipizan White

How It Works

The exterior door handle transmits driver input to the internal latch assembly via a mechanical rod or cable and associated clips. When pulled, the handle moves the linkage to release the latch, allowing the door to open. Proper fit and alignment are essential to avoid excessive wear on clips or binding of the mechanism.

Installation Recommendations

• Prepare Tools: Panel trim tools, screwdriver set, pliers and a flashlight. Keep replacement clips ready in case originals break.
• Removal Steps: Remove the interior door trim panel to access the handle mounting points and linkage. Disconnect any electrical connectors for central locking if present. Unfasten the retaining screws/bolts and carefully detach the linkage from the handle (note clip orientation).
• Fitment: Position the new handle, secure the fasteners and reconnect the linkage. Ensure clips are fully engaged and the handle operates smoothly before reassembling the door trim.
• Final Check: Test door opening and locking functions several times and check for proper paint alignment and gaps.
• Safety: Work with the ignition off and the key removed. Support the door panel to avoid damaging trim clips during removal and reinstallation.

How To Replace (Step‑by‑Step)

1. Open the door and remove the trim panel using trim removal tools to avoid damage.
2. Locate and disconnect the handle linkage and any central locking connector.
3. Remove mounting fasteners securing the exterior handle to the door shell.
4. Extract the old handle, fit the new handle into position and secure with fasteners.
5. Reattach the linkage and connectors, ensuring clips are correctly seated.
6. Refit the door trim panel and perform functional checks of latch and lock.

Why This Part Most Often Fails

Exterior door handles commonly fail due to mechanical wear and fatigue of internal plastic components and mounting tabs, impact damage (parking accidents or slamming), and corrosion or seizing of metal linkage in older vehicles. Small plastic clips that secure the linkage are frequent weak points and are often the first items to break, causing the handle to actuate without opening the door.

Notes

This handle is frequently searched by part number 9101AQ and by color code KWD (Lipizan White). Suitable for both professional technicians and experienced DIYers looking for an exact-fit, painted replacement.

Order now to restore function and appearance to the left rear door of your Citroën C1 or Peugeot 107.