The driver’s door handle Citroën Peugeot KTGA 9101W9 is an original part intended for the left front door with a key hole. This is a used car part suitable for Citroën C2, Citroën C3 and Peugeot 307 cars. Thanks to the exact design and identical product codes, it fits into place without modification and restores the full function of opening the door from the outside.

The color of the handle is marked with the KTG code – Hurricane gray lacquer. This color variant is ideal when replacing a damaged handle when you want to preserve the original appearance of the car without the need for additional painting. A used original part usually matches the shade and quality of the material better than cheap universal replacements.

Technical information:
Manufacturer: PSA Citroën Peugeot
Model: Citroën C2, Citroën C3, Peugeot 307
Location: left front door (driver’s side), version with keyhole
Color: KTG – Hurricane gray lacquer
Product codes: 9101W9, 9101AC, KTGA
Other numbers: they may vary according to the specific production plate, but the basic identification takes place according to the codes 9101W9, 9101AC and the KTG color marking

The use of product numbers 9101W9, 9101AC and the KTGA designation greatly simplifies the search for an exact match, especially for auto mechanics and home repairers who often work by catalog numbers. Matching these codes is key to proper installation and trouble-free operation of the door handle.

Installation recommendations:
– Before disassembling the original handle, disconnect the battery, especially if you will be handling near the lock or electric central locking.
– Remove the interior door trim to gain access to the tie rods and bolts holding the handle. Be careful not to damage the plastic handles.
– Check the condition of the pull rods, plastic clips and the lock mechanism; worn or cracked parts should be replaced at the same time.
– Before installing the crank, clean the mating surfaces and check that there is no dirt or corrosion in the key hole or around the mechanism.
– Tighten the handle with the prescribed force to avoid deformation of the plastic or loosening during use.
– After installation, test opening the door several times from the outside and the inside, including locking and unlocking with the key, before finally closing the door trim.

The driver’s door handle Citroën Peugeot KTGA 9101W8 is an external door handle designed for Citroën and Peugeot cars, which is often searched for precisely by the product codes 9101W8, 9101AC or the color designation KTG (Hurricane gray paint). Thanks to these numbers, you can easily assign it to the correct model and position on the body.

This is a handle that can be used on the right front and right rear doors as well as on the left rear door of selected models. It is suitable for Citroën C2, Citroën C3 and Peugeot 307 cars, where it ensures reliable opening of the door from the outside and at the same time preserves the original appearance of the car thanks to the original paint.

Technical information
Manufacturer: PSA (Citroën / Peugeot)
Model: Citroën C2, Citroën C3, Peugeot 307
Location: right front door, right rear door, left rear door (according to the specific car)
Color: KTG – Hurricane gray lacquer
Product codes: 9101W8, 9101AC
Other numbers / designations: KTGA, KTG

This handle is suitable for auto mechanics and home repairers who are looking for a replacement for a damaged or non-functioning exterior door handle, and want to maintain the same shade of paint and the proper functioning of the mechanism.

Installation recommendations
– Before removing the old handle, disconnect the battery if you will be tampering with the central locking or electrical parts in the door.
– Remove the inner door trim carefully to avoid damaging the plastic handles.
– Check the condition of the tie rods and the locking mechanism, if necessary, clean them and lightly lubricate them with a suitable lubricant.
– When installing a new handle, make sure that the rod is properly seated in the lock mechanism – a bad fit can cause the door not to open or close properly.
– Tighten all screws evenly and without using excessive force to avoid cracking the plastic parts.
– Po montáži několikrát otestujte otevírání a zavírání dveří zvenku i zevnitř a zkontrolujte správnou funkci centrálního zamykání.

Are you looking for a reliable way to restore the functionality and aesthetics of your Citroën or Peugeot doors? Our silver door handle, specifically designed for Citroën C2 and C3 models, offers the ideal solution to restoring smooth operation of your doors while maintaining the original look of your vehicle.

This replacement door handle is the perfect choice for owners of these models who are seeking a quality yet affordable alternative to new original parts. It is made from durable materials that ensure long lifespan and consistent reliability. Thanks to its metallic EZRC finish, it seamlessly fits into the overall design of your automobile.

Technical Information:

• Manufacturer: PSA CITROËN PEUGEOT
• Models: Citroën C2, Citroën C3
• Product Codes: 9101W5 EZRC
• Additional Numbers: NFP

Installation of the handle is also straightforward. With a few basic tools and a simple procedure that can be found on many online forums and videos, you can easily install it at home, saving both time and money that you would otherwise spend at a service center.

This specific model of door handle is known for its resistance to common wear and tear, making it a reliable choice for your vehicle. Whether you are an automotive enthusiast or need it for regular maintenance, this handle will deliver the performance you expect from quality parts.

Don’t miss the chance to improve both the functionality and aesthetics of your vehicle with this quality door handle. Purchase it today and enjoy the peace of mind knowing your car is equipped with a reliable part that will last.

Are you searching for a reliable used auto part for your Citroën or Peugeot vehicle? Our Silver Door Handle, featuring an elegant metallic finish, is an excellent choice for replacing damaged or non-functional handles in your CITROËN C2 and C3. This product meets original specifications and is ideal for restoring the functionality and aesthetics of your doors.

Choosing replacement parts for your vehicle can be challenging, but our Silver Door Handle ensures the compatibility and quality you are looking for. This part has been carefully selected to meet your expectations and provide long-term satisfaction.

Technical Information

• Manufacturer: PSA (Peugeot-Citroën)
• Model: Citroën C2, Citroën C3
• Product Codes: 9101W4 NFP
• Additional Numbers: EZRC

Installation of this door handle is straightforward and uncomplicated, meaning it can be easily replaced by both professional mechanics and skilled DIYers. The handle is designed to match the original handles on the left rear and right & left front doors, ensuring seamless use and integration into the appearance of your vehicle.

Don’t wait any longer to restore the functionality and appearance of your car’s doors. This handle will not only enhance the aesthetic value of your vehicle but also ensure safe and convenient use of the doors. Order now and make sure your Citroën C2 or C3 looks like new again!

Are you searching for a replacement part that combines reliability and performance? The Driver Door Handle for Citroën and Peugeot vehicles is just for you. This original used part with code 9101W8 has been carefully inspected and is ready for installation. The handle is compatible with Citroën C2, Citroën C3, and Peugeot 307 models, making it an excellent choice for owners of these types of vehicles. Additionally, its grey color adds an elegant touch to your vehicle.

Since this part comes directly from a vehicle, you can be assured of its quality and functionality. Although used, it has been treated with the utmost care to provide you with the best utility value and long lifespan. With this product, you not only get a replacement part but also peace of mind and satisfaction with every drive.

Technical Information

• Manufacturer: PSA Citroën Peugeot
• Model: Compatible with Citroën C2, Citroën C3, and Peugeot 307
• Product Codes: 9101W8, 9101AC ETS

The installation of the handle is straightforward and requires no special tools, making it an ideal choice for both DIY enthusiasts and professionals. It is designed to fit perfectly and function fully as an original part, ensuring seamless operation of your vehicle’s doors. Take advantage of the opportunity to purchase a quality and tested auto part that enhances your vehicle’s functionality without any unnecessary compromises.

When selecting parts for your vehicle, it is always important to consider both quality and compatibility. With this product, you can be confident that your car will be equipped with only the best and most accurately corresponding part. Don’t shy away from car troubles – choose the Driver Door Handle Citroën Peugeot and enjoy smooth operation of your car every day.

High-quality rear tailgate handle designed for direct replacement on Citroën C3 Pluriel and Peugeot 307 Hatchback models. This handle includes an integrated microswitch for trunk release and central locking signaling. Ideal for professional workshops and DIY mechanics looking for a precise fit and reliable operation. Frequently searched under part number 8726N1, the unit matches original fitment dimensions and exterior finish in Gray Cendre (ETS), making it a convenient repair when the exterior handle is worn, cracked, or the microswitch fails.

Technical Information

• Manufacturer: Stellantis
• Model: Citroën C3 Pluriel; Peugeot 307 Hatchback
• Product Codes: 8726N1
• Additional Numbers: ETS, ETSC

Compatibility And Applications

Designed primarily for Citroën C3 Pluriel and Peugeot 307 Hatchback variants equipped with an externally mounted tailgate handle with integrated microswitch. Often referenced by part code 8726N1 in parts catalogs and workshop searches.

How The Part Works

The handle provides the mechanical interface for opening the tailgate and houses a microswitch that sends an electrical signal to the central locking or trunk release circuit. When operated, the lever activates the latch mechanism and the microswitch communicates the open/closed status to the vehicle electronics.

Replacement Procedure

1. Open Tailgate And Support Securely.
2. Remove Interior Tailgate Trim To Access Handle Fasteners.
3. Disconnect The Electrical Connector For The Microswitch.
4. Unscrew The Retaining Bolts/Screws And Remove The Old Handle.
5. Fit The New Handle, Reinstall Fasteners And Reconnect The Microswitch Connector.
6. Reassemble Interior Trim And Test Handle Operation, Central Locking, And Trunk Release.

Installation Recommendations

• Use Correct Tools To Avoid Damaging Trim Clips And Fasteners.
• Check And Clean The Connector Pins; Replace If Corroded.
• Lubricate Mechanical Latch Points With Appropriate Grease To Prevent Premature Wear.
• Ensure Proper Alignment Of The Handle To Avoid Excessive Load On The Microswitch.
• After Installation, Verify Central Locking And Electrical Signal From The Microswitch Works Consistently.

Common Failure Causes

• Mechanical Wear And Plastic Fatigue From Frequent Use Causing Cracks Or Breakage.
• Microswitch Failure Due To Contact Wear Or Moisture Ingress.
• Corrosion Of Fasteners Or Connector Pins Leading To Intermittent Electrical Contact.
• Impact Damage From Rear Collisions Or Forceful Operation.

This tailgate handle is a practical replacement part for restoring trunk access and reliable electrical signalling on compatible Citroën and Peugeot models. Always inspect surrounding latch components and cables when replacing the handle to ensure a durable repair.

Are you looking for reliable and quality used automotive parts for your Citroën or Peugeot vehicles? We present to you the Driver Door Handle that is compatible with Citroën C2, C3, and Peugeot 307 models. This part is ideal for replacing damaged or non-functional door handles of your vehicle.

The handle has been thoroughly tested to ensure its full functionality and safe usage. Additionally, with its original EZW – Grey color, it perfectly matches the aesthetics of your car. This product is characterized by high durability and a long service life, making it a dependable replacement for the original part.

Technical Information:
Manufacturer: Citroën, Peugeot
Models: Citroën C2, Citroën C3, Peugeot 307
Product Codes: 9101W8, 9101AC, EZWD
Other Numbers: Not rated

There is no need to worry about complicated installation. This driver door handle has been designed for easy replacement, which will be appreciated by both professional mechanics and individuals who want to carry out repairs on their vehicles themselves. Since this is a used part, we recommend conducting a visual and functional inspection before installation to prevent any unexpected issues during use.

Shop with confidence with us, where quality and customer satisfaction come first. Let your car look great again and operate flawlessly with our verified automotive parts!

Are you looking for high-quality and reliable parts for your Citroën or Peugeot vehicle repairs? We have a fantastic recommendation for you – the Rear Lid Handle with Micro Switch, which is perfect for Citroën C3 Pluriel and Peugeot 307 HATCHBACK. This auto part is an excellent choice for anyone searching for original replacement parts at a reasonable price.

The handle is in a metallic grey color (color code EZWD, Grey FER), which not only adds functionality to your vehicle but also enhances its aesthetic appearance. It is ideal for those wanting to maintain the original look of their car or for mechanics looking for quality replacement parts for their customers.

Technical Information
Manufacturer: PSA Peugeot Citroën
Model: Citroën C3 Pluriel, Peugeot 307 HATCHBACK
Product Codes: 8726N1, EZWD
Additional Numbers: Grey FER, color label EZWD

This part is particularly important for the seamless opening and closing of your vehicle’s rear lid, protecting the trunk contents from external elements and ensuring safety during cargo transportation. The micro switch replacement further contributes to ensuring that the vehicle’s electronic systems accurately detect the lid’s status – open or closed.

Considering common wear and tear, it is crucial to have quality parts that ensure smooth operation of all mechanisms. Whether you are a professional mechanic or a DIY enthusiast, this part is the perfect solution to keep your vehicle in operational condition while preserving its original look. Add this essential part to your shopping cart today and ensure your car is always in top condition!

Are you looking for a replacement part for your Citroën or Peugeot vehicle? The Rear Tailgate Handle, product number 8726N0, is a high-quality auto part that promises reliability and longevity. This part is the ideal choice for repairing or replacing a damaged tailgate handle on your vehicle.

The Rear Tailgate Handle, equipped with a micro switch, has been designed for perfect compatibility with Citroën C3 Pluriel and Peugeot 307 HATCHBACK models. Its precise design ensures that it will fit perfectly and is easy to install. The replacement is relatively straightforward and can be performed by both DIY enthusiasts and professional mechanics, saving time and money on servicing.

Technical Information:
Manufacturer: PSA
Model: Citroën C3 Pluriel, Peugeot 307 HATCHBACK
Product Codes: 8726N0
Other Numbers: N/A

With us, you can expect that all offered parts are carefully inspected and tested before sale, ensuring their full functionality and safety. The Rear Tailgate Handle Citroën Peugeot 8726N0 is therefore the perfect solution for anyone looking for a reliable and affordable auto part.

If you have any questions regarding the installation or compatibility of this part with your vehicle, do not hesitate to contact us. Our expert services are available for any advice or assistance in selecting the right auto part for your vehicle.

Are you looking for a reliable replacement for a damaged or non-functional inner left door handle for your Citroën C2 or C3? We offer original used parts that will ensure your car functions as it should. This left door handle has been carefully removed from Citroën C2 and C3 models and is ready for installation.

With used parts, it is crucial that they are original and manufactured specifically for the vehicle model, ensuring full compatibility and optimal functionality. This particular inner handle is the right solution for Citroën vehicle owners who seek a quality and cost-effective repair option without the need to invest in new parts.

Technical Information:
Manufacturer: Citroën
Model: Citroën C2, Citroën C3, Citroën C3 Pluriel
Product Codes: 9647164677, 9647164577, 9143G0
Additional Numbers: 9143G0

This part is located on the driver’s side and is primarily intended for internal use, serving the function of opening the door. It is frequently sought after for its specificity and model precision, which is key for proper function in Citroën vehicles. The installation is relatively straightforward, appreciated by both DIY enthusiasts and professional mechanics alike.

With years of experience with Citroën vehicles, we can assure that this part will provide a quality and long-lasting solution for your left door. If you need assistance with selection or installation, feel free to reach out. Our experts are available for any inquiries regarding the assembly or functionality of this part.

Remember, even used parts can offer excellent functionality and longevity, provided they are chosen and installed correctly. Ensure that the handle fits precisely to your Citroën C2 or C3 model and enjoy smooth operation of your vehicle.