This exterior left front door handle is a direct-fit replacement designed for workshop use and DIY repairs on Citroën and Peugeot models. Painted in Vapor Grey (EVG), it retains the original appearance and mounting points, making it suitable for bodywork repairs, collision replacement or wear-related renewal. Frequently searched under product code 9101GF, the part is aimed at professional mechanics and experienced home mechanics who need a reliable visual and mechanical match for the listed models.

Key Features

• Direct replacement for left front exterior door handle on listed Citroën and Peugeot models.
• Factory-matching Vapor Grey (EVG) painted finish for minimal visible difference after installation.
• Made to fit original mounting points and linkages for straightforward installation.
• Suitable for collision repair and routine replacement when the original handle is damaged or worn.

Technical Information

• Manufacturer: Stellantis (Citroën / Peugeot)
• Model: Citroën Berlingo III, C4 II, C4 Picasso, Grand C4 Picasso, Jumpy III; Peugeot 207, 308, Partner III, Expert III
• Product Codes: 9101GF
• Additional Numbers: EVG (Vapor Grey)

Installation Recommendations

• Work With The Door In A Stable Position And Protect Interior Trim.
• Remove Interior Door Trim And Moisture Barrier To Access Handle Fasteners And Linkages.
• Carefully Unclip And Label Linkage Rods And Fasteners Before Removal To Ensure Correct Reassembly.
• If The Original Handle Contains A Lock Cylinder Or Electrical Components, Transfer Them To The New Handle As Required.
• Refit Fasteners To Original Torque And Check Smooth Operation Of The Latch And Central Locking After Assembly.
• If Alignment Issues Appear, Adjust Door Catch Or Hinge Settings To Prevent Premature Wear.

Why The Part Most Commonly Fails

• Mechanical Wear And Degraded Plastic Clips Or Springs From Years Of Use.
• Impact Damage Or Deformation From Collisions Or Forced Entry Attempts.
• Corrosion Of Internal Metal Components Or Accumulated Dirt And Moisture Affecting Movement.
• Freezing And Thermal Stress Can Make Plastic Components Brittle And Prone To Breaking.

Fitment Notes

Verify That You Need The Left Front Exterior Handle (Driver Side On Left-Hand Drive Vehicles). Depending On Vehicle Variant, The Lock Cylinder Or Additional Trim May Need To Be Transferred From The Old Handle.

Order Using The Product Code 9101GF To Improve Searchability And Ensure You Receive The Correct Color Variant (EVG – Vapor Grey).

Part description

Used door handle ETSC 9101GF intended for left front door. It is a body part suitable as a replacement in the event of a crack, squeezing of the mechanism or damage to the surface of the handle. Due to the original name Stellantis (Citroën/Peugeot), it is often searched directly by part number.

Colour: ETS – Cendre gray lacquer (as specified in the documents).

Technical information

• Manufacturer: Stellantis (Citroën / Peugeot)
• Model: CITROEN BERLINGO III, C4 II, C4 PICASSO and GRAND PICASSO, JUMPY III; PEUGEOT 207, 308, PARTNER III, EXPERT III
• Other numbers: ETSC

Product codes

• Product codes: 9101GF

Installation recommendations

In general/typically, door handle replacement may vary depending on the specific model and design of the door (rails, lock, tie rod/cables). Below is a practical procedure for this type of part.

1) Before assembly

• Compare with the old part: orientation (front left), shape, fit, design and marking 9101GF.
• Check the condition of the used handle: cracks, play, smooth operation, undamaged grips and bearing surfaces.
• Check shade: ETS – Cendre grey (may vary due to paint age and wear).

2) Necessary tools and materials

• Set of screwdrivers / bits (according to the type of joints in the door)
• Plastic crowbar for removing upholstery (to avoid damage)
• Pliers for buckles/pins, or a small hook for handling tie rods
• Cleaning agent and cloth (for contact surfaces)

3) Step-by-step assembly procedure

1. Secure the vehicle against movement and open the door for convenient access.
2. Disassemble the inner lining of the door (typically: covers, screws, then carefully pry out the clips).
3. Disconnect any connectors in the door if they interfere with handling (proceed carefully, do not pull on the cables).
4. Access the space to the outer handle (after removing the lining and any film/protection).
5. Release the handle attachment according to the door design (screws/detent) and prepare the position of the pull rods/cable guides.
6. Disconnect the tie rods/cables from the crank – note their routing and locking position.
7. Remove the original handle and clean the landing surface in the door.
8. Insert the new handle into the hole, seat it correctly in the guides and bearing surfaces.
9. Reattach the tie rods/cables and check that they are properly secured (no crossing or tension).
10. Tighten the handle attachment and verify that it is firmly seated without play.
11. Before completing the paneling, test the door opening function (from outside and inside).
12. Refit the protective film/insulation (if removed), connect the connectors and fit the door trim.
• 4) Post-assembly checks and test drive/function verification
  • Verify the smooth operation of the handle and correct return to the starting position.
  • Check that the door opens/closes without increased resistance and that nothing rubs.
  • After a short drive, check again for play or unwanted noises from the door area.

  5) The most common assembly mistakes + how to avoid them

  • Swap sides (right/left): always compare the shape and orientation with the old piece before assembly.
  • Incorrectly guided or unsecured drawbar/cable guide: note the position before disassembly and test function several times after assembly.
  • Damage to trim clips: use a plastic pry bar and work evenly around the perimeter.
  • Bad seat of the handle: clean the seating surfaces and seat the handle in the guides without violence.

  Reasons why the part is damaged

  • Mechanical wear due to frequent use (backlash, squeezing of the bearing).
  • Cracking of plastic parts due to the age of the material or frost.
  • Damage after an accident or during careless handling (e.g. prying open a frozen door).
  • Corrosion/fouling of the lock mechanism which increases resistance and stresses the handle.
  • Incorrect installation (tension of tie rods/cable guides, crooked seating) which leads to excessive stress.
  ]]> https://www.usedpartsvendor.com/body/door-handles/c4-ii-door-handles/door-handle-citroen-peugeot-gray-knn-9101gf/ Wed, 10 Dec 2025 03:03:57 +0000 https://www.usedpartsvendor.com/uncategorized/door-handle-citroen-peugeot-gray-knn-9101gf/ Left front door handle for CITROEN PARTNER III C4 PICASSO i GRAND PICASSO JUMPY III and PEUGEOT 207 308 PARTNER III EXPERT III cars
  Color KKN – ADEN RED PAINT

  The Citroën Peugeot door handle in gray design with the marking KNN 9101GF is intended for the left front door of selected Citroën and Peugeot models. It is a used original part from the PSA concern, suitable for professional car mechanics as well as for home repairs, where the emphasis is on accurate seating and reliable door function.

  This crank is suitable for cars that require a quality replacement of the original part, and is often searched for precisely by the product number 9101GF. Thanks to the correct shape, attachment and dimensions, it enables a full replacement of the original handle without the need to modify the bodywork.

  Technical information
  Manufacturer: PSA (Citroën / Peugeot)
  Model:
  – Citroën C4 Picasso
  – Citroën Grand C4 Picasso
  – Citroën Jumpy III
  – Citroën Berlingo III / Partner III (Citroën)
  – Peugeot 207
  – Peugeot 308
  – Peugeot Partner III
  – Peugeot Expert III

  Product codes:
  – 9101GF

  Other numbers:
  – KNN (designation of color design / part specification)

  Color / design:
  – Gray version of the door handle
  – Surface and color designed to harmonize with the original appearance of the car

  Part location:
  – Left front door

  Part Type:
  – External door handle for Citroën and Peugeot passenger cars and light commercial vehicles

  Installation recommendations
  – Before assembly, compare the shape and handles with the original handle from the car.
  – Dismantle the original handle carefully to avoid damaging the lock mechanism or the pulls inside the door.
  – Check the condition of the lock, pulls and plastic clips – worn or cracked parts should be replaced at the same time.
  – When assembling, seat the handle correctly in the hole in the body and tighten all the screws securely according to the access from the inside of the door.
  – Check the smooth operation of the handle from the outside and from the inside – the handle must return to the starting position and the door must open and close without stuttering.
  – After completing the assembly, perform a door tightness test (fit on the seal) and adjust the position of the door or lock if these parts have been tampered with.

  By using this original Citroën Peugeot KNN 9101GF door handle, you will get a functional and dimensionally accurate replacement for the damaged part, which will restore the comfortable and safe use of the door in your car.

  ]]> https://www.usedpartsvendor.com/body/door-handles/berlingo-partner-i-and-ii-door-handles/right-rear-door-handle-citroen-berlingo-9634932180-9101p9-kddc-2/ Sat, 15 Mar 2025 03:27:48 +0000 https://www.usedpartsvendor.com/uncategorized/right-rear-door-handle-citroen-berlingo-9634932180-9101p9-kddc-2/ The Right Rear Door Handle is designed for Citroën Berlingo and Peugeot Partner I and II models up to 2005. This essential part enhances the functionality and aesthetics of your vehicle’s door, ensuring ease of access and secure closure.

  With its sleek design in KDD – Sand Bivouac color, this door handle is both practical and visually appealing, making it a perfect replacement for a worn or damaged handle.

  Commonly identified by OEM part numbers 9634932180 and 9101P9, this handle is critical in maintaining your vehicle’s integrity. An aging door handle can lead to difficulty in operation and may eventually break, causing inconvenience.

  Installing a new door handle is straightforward and typically requires only basic tools. Ensure your vehicle is stationary, then carefully remove the old handle and replace it with the new one, following manufacturer instructions for best results.

  Technical Information

  • Manufacturer: PSA Citroën Peugeot
  • Model: Citroën Berlingo & Peugeot Partner I & II
  • Product Codes: 9634932180
  • Additional Numbers: 9101P9
  ]]> https://www.usedpartsvendor.com/body/door-handles/berlingo-partner-i-and-ii-door-handles/lid-handle-citroen-berlingo-red-9621858877-kjf/ Sat, 15 Mar 2025 03:13:32 +0000 https://www.usedpartsvendor.com/uncategorized/lid-handle-citroen-berlingo-red-9621858877-kjf/ The Tailgate Handle is specifically designed for Citroën Berlingo and Peugeot Partner I & II models, ensuring a perfect fit and reliable functionality. This handle comes in a vibrant red color (KJF), enhancing your vehicle’s aesthetic appeal while providing essential access to the cargo area.

  This component is crucial for the operation of the tailgate, allowing smooth opening and closing. Regular use or wear and tear may lead to deterioration, making replacements necessary over time. This lever is engineered for easy installation, ensuring you can replace the handle without extensive mechanical expertise.

  Technical Information:

  • Manufacturer: PSA Citroën Peugeot
  • Model: Citroën Berlingo, Peugeot Partner I & II
  • Product Codes: 9621858877, 872072
  • Other Numbers: KJF, ARDENT Red
  ]]> https://www.usedpartsvendor.com/body/door-handles/berlingo-partner-i-and-ii-door-handles/lid-handle-citroen-berlingo-green-9621858877-2/ Sat, 15 Mar 2025 03:05:44 +0000 https://www.usedpartsvendor.com/uncategorized/lid-handle-citroen-berlingo-green-9621858877-2/ Upgrade your vehicle with the Tailgate Handle designed for Citroën Berlingo and Peugeot Partner I & II. This handle features a vibrant green metallic finish, adding both functionality and style to your vehicle.

  The tailgate handle is a crucial component for accessing the rear compartment of your vehicle. Over time, due to regular use and exposure to the elements, handles may become worn or damaged, making it essential to replace them for proper functionality.

  Replacement of the handle is straightforward and can typically be accomplished by unfastening a few screws and disconnecting the old handle from the latch mechanism. Ensure to check the alignment with the tailgate to guarantee a smooth operation.

  Technical Information

  • Manufacturer: PSA CITROEN PEUGEOT
  • Model: Citroën Berlingo, Peugeot Partner I & II
  • Product Codes: 9621858877
  • Additional Numbers: 872072
  ]]> https://www.usedpartsvendor.com/body/door-handles/berlingo-partner-i-and-ii-door-handles/left-rear-door-handle-citroen-berlingo-9639225577-9101cg-ezrc-2/ Sat, 01 Feb 2025 04:28:57 +0000 https://www.usedpartsvendor.com/uncategorized/left-rear-door-handle-citroen-berlingo-9639225577-9101cg-ezrc-2/ Upgrade your Citroën Berlingo and Peugeot Partner with the high-quality Left Rear Door Handle designed for vehicles made since 2005. This handle is an essential component for ensuring the functionality and security of your vehicle’s rear door.

  Crafted in a sleek grey metallic finish (EZRC – Grey Aluminum Paint), this door handle not only adds a touch of style but also guarantees durability to withstand everyday use.

  This handle is compatible with the following models: Citroën Berlingo and Peugeot Partner I and II.

  Replacing your door handle is straightforward, typically requiring just basic tools. It is advisable to replace it if there is significant wear or damage, as this can affect the security and operation of the door.

  Technical Information

  • Manufacturer: PSA Citroën Peugeot
  • Model: Citroën Berlingo, Peugeot Partner I II
  • Product Codes: 9639225577, 9639225677
  • Other Numbers: 9101CG EZRC
  ]]> https://www.usedpartsvendor.com/body/door-handles/berlingo-partner-i-and-ii-door-handles/drivers-door-handle-black-citroen-berlingo-9101j4-9101h6/ Thu, 24 Oct 2024 02:04:30 +0000 https://www.usedpartsvendor.com/uncategorized/drivers-door-handle-black-citroen-berlingo-9101j4-9101h6/ This driver’s door handle is designed specifically for the left front doors of the Citroën Berlingo and Peugeot Partner I & II. The sleek black finish adds an aesthetic touch to your vehicle, whether you’re executing a DIY repair or a full renovation.

  Are you looking for a reliable replacement part for your Citroën or Peugeot vehicle? This driver’s door handle is the perfect choice. It is engineered to meet original specifications, ensuring a seamless replacement and long-lasting performance.

  This automotive part not only excels in functionality but also brings a modern look to your car. The black color of the handle enhances the overall appearance, promoting ease of opening and locking the doors, crucial for daily use.

  Technical Information
  Manufacturer: PSA CITROEN PEUGEOT
  Model: Citroën Berlingo, Peugeot Partner I and II
  Product Codes: 9101J4, 9101H6
  Additional Numbers: 9101J4, 9101H6

  The door handle is straightforward to replace and does not require special tools, making it ideal for DIY enthusiasts or mechanics alike. This part is popular for its durability and long lifespan under regular use.

  Take advantage of our offer and restore the functionality and appearance of your doors with this quality handle that combines practicality, style, and resilience. We recommend this handle for anyone seeking a reliable and aesthetic solution for their Citroën or Peugeot vehicle.

  ]]> https://www.usedpartsvendor.com/body/door-handles/berlingo-partner-i-and-ii-door-handles/door-handle-black-citroen-berlingo-9101j5-9101h7-2/ Fri, 18 Oct 2024 02:05:06 +0000 https://www.usedpartsvendor.com/uncategorized/door-handle-black-citroen-berlingo-9101j5-9101h7-2/ This is a right front door handle for CITROËN BERLINGO and PEUGEOT PARTNER I and II, available in black color.

  Looking for a high-quality replacement part for your Citroën Berlingo or Peugeot Partner? Our black door handle is the perfect choice for anyone needing a reliable and affordable alternative to original parts. This product is specifically designed for CITROËN BERLINGO and PEUGEOT PARTNER I and II models, ensuring a perfect fit and functionality.

  Installation of the door handle is relatively straightforward, making it a task suited for both advanced DIY enthusiasts and professional mechanics. The quality materials used in its construction guarantee long-lasting durability against common wear and tear. For a reasonable price, you will acquire a product that effectively restores the original functionality of your doors.

  Technical Information:
  Manufacturer: Compatible with Citroën, Peugeot
  Model: Citroën Berlingo, Peugeot Partner I and II
  Product Codes: 9101J5, 9101H7
  Other Numbers: This part may also be alternatively referenced in other catalogs as 9101J5 or 9101H7, making your search and compatibility verification easier.

  If you are looking for a reliable and cost-effective spare part to repair or renovate the doors of your vehicle, this black door handle is an ideal option. With our spare parts, you will receive guaranteed quality and functionality without compromise.

  We ensure fast delivery, and if needed, we offer expert support in selecting the right part. Don’t miss the chance to get your car back to full operation with us!

  ]]> https://www.usedpartsvendor.com/body/door-handles/berlingo-partner-i-and-ii-door-handles/lid-handle-citroen-berlingo-green-9621858877-ekqd/ Wed, 15 May 2024 04:09:08 +0000 https://www.usedpartsvendor.com/uncategorized/lid-handle-citroen-berlingo-green-9621858877-ekqd/ The Tailgate Handle for Citroën Berlingo and Peugeot Partner I & II is designed to provide seamless functionality and a stylish appearance to your vehicle. The handle comes in EKQ – Lucifers Red color, ensuring a perfect match for your car’s aesthetic.

  This essential component often needs replacement due to wear and tear from regular use. It’s not uncommon for tailgate handles to fail over time, especially in vehicles subjected to frequent opening and closing. Ensuring that your tailgate handle is in good condition is critical for both convenience and security.

  Replacing the tailgate handle is a straightforward process, making it an excellent option for both professional mechanics and DIY enthusiasts. To replace it, simply remove the panel covering the handle installation area, disconnect the old handle, and connect the new one, securing it in place. Regular checks and timely replacements can prevent issues related to tailgate functionality.

  Technical Information

  • Manufacturer: PSA
  • Model: Citroën Berlingo, Peugeot Partner I & II
  • Product Codes: 9621858877, 872072
  • Additional Numbers: EKQD
  ]]>