Product Overview

This exterior door handle is an aftermarket replacement designed for Citroën and Peugeot models, supplied in KGQ Kyanos Blue. Commonly referenced by part code 9101GH (KGQC), it is intended for use on left rear and right front/right rear doors depending on vehicle configuration. The robust design matches the exterior finish and mounting points of the original part to ensure proper fit and appearance. Ideal for professional workshops and DIY mechanics looking for a direct-fit, color-matched replacement.

Technical Information

• Manufacturer: Stellantis / Citroën & Peugeot
• Model: Various Citroën And Peugeot Models (See Fitment)
• Product Codes: 9101GH, KGQC
• Additional Numbers: Not Specified

Fitment

Compatible with a range of B‑segment and compact models from Citroën and Peugeot, including but not limited to:

• Peugeot 2008
• Peugeot 207
• Peugeot 308
• Peugeot Partner / Partner Tepee
• Citroën Berlingo (B9)
• Citroën C4 II / C4 Picasso
• Citroën/Peugeot Jumpy III / Expert III

Function

The door handle provides manual actuation of the door latch and integrates with the door’s locking mechanism. It transmits the user’s mechanical input to the latch assembly via linkages or cables and must maintain correct alignment and smooth movement to ensure reliable opening and locking.

Most Common Failure Causes

• Mechanical Wear: Repeated use can wear pivot points, weakening plastic clips or levers until they break.
• Impact Damage: Door hits, parking incidents, or forced entry attempts can deform or crack the handle.
• Corrosion And Environmental Damage: Salt, moisture and dirt ingress can seize linkages or corrode metal fixing points.
• Paint Fading Or Scuffs: Exterior exposure may affect the finish, especially on color‑matched parts.
• Internal Mechanism Failure: Linkage bushings, springs or the latch interface can fail, making the handle feel loose or non‑functional.

Mounting Recommendations

Follow these practical steps to replace the door handle safely and ensure long service life:

• Prepare Tools: Typical tools include trim removal tools, Torx or Phillips drivers, socket set and pliers.
• Remove Door Trim Carefully: Use proper trim tools to avoid breaking clips. Detach the inner door panel to access the handle retaining bolts and linkages.
• Disconnect Linkages: Note the orientation of rods and clips. Remove retaining clips gently to avoid damage.
• Fit Replacement: Align the new handle to the mounting points and secure fasteners to the manufacturer’s recommended torque where available.
• Reconnect And Test: Reattach linkages and test door operation (open, close, lock, and unlock) before refitting the door panel.
• Lubricate Moving Parts: Apply suitable grease to pivot points and linkages to reduce wear and prevent noise.
• Check Finish And Gaps: Ensure the handle sits flush and the paint match meets aesthetic expectations.

Advice For Installers

For professional fitment: Inspect the latch and internal linkages for wear when replacing the handle. Replace damaged clips or worn linkage components at the same time to avoid repeat visits. Keep spare retaining clips on hand—these are a common failure point during disassembly.

Why Replace This Part

Replacing a worn or broken door handle restores proper door operation and security, prevents further damage to the latch assembly, and keeps the vehicle exterior appearance factory‑correct when matched in KGQ Kyanos Blue. For technicians and DIYers, using a correct-fit handle with the right color code reduces rework and improves customer satisfaction.

Product Overview

High-quality exterior door handle designed for Citroën and Peugeot models. Ideal for replacement jobs in garages or for DIY enthusiasts. The handle matches factory fit dimensions and finish for a flush, OEM-like appearance. Commonly referenced by product code 9101GH or color code EVGC, this part is suitable when the original handle is scratched, cracked, or the internal mechanism has failed.

Who Should Buy

Designed for professional auto mechanics and experienced DIYers performing bodywork or door repairs. Fits a range of Stellantis group vehicles and is often searched by its product code (9101GH) when ordering parts.

Technical Information

• Manufacturer: Stellantis / Citroën / Peugeot
• Model: Citroën 2008, Citroën C4 II (C4 Picasso/C4 Picasso II), Citroën Berlingo III (B9), Peugeot 207, Peugeot 308, Peugeot Partner / Partner Tepee, Jumpy III, Expert III
• Product Codes: 9101GH, EVGC
• Other Numbers: — (No additional OEM numbers provided)

Function And Typical Faults

The exterior door handle provides the mechanical interface to open the door from the outside. It transmits motion to the internal latch via linkage or cable. Typical failure modes include broken plastic components, worn pivot points, snapped linkage clips, paint abrasion, and damage from impacts. Water ingress and corrosion can also impair function over time, particularly in vehicles exposed to road salt or humid environments.

Replacement Guide

Basic steps for replacing the exterior door handle (general guidance—follow vehicle-specific service manual):

• Remove the interior door trim panel to gain access to the handle mechanism (remove screws, clips, and window switch harness as required).
• Peel back the vapor barrier or water shield carefully to reach the handle mounting area.
• Unbolt or unclip the exterior handle from inside the door; disconnect linkage or cable from the latch.
• Fit the new handle in position, reconnect linkage/cable, and test operation before reassembling the door panel.
• Reinstall the water shield and door trim, ensuring all clips and fasteners are secured.

Installation Recommendations

• Work on a cool, dry day to avoid warping trim or adhesive failure when removing panels.
• Use proper trim removal tools to prevent breaking plastic clips and retainers.
• Apply a small amount of lubricant on pivot points and linkages for smooth operation.
• Verify alignment and smooth operation of the latch before final reassembly.
• Retain all removed fasteners and replace any damaged clips to ensure a secure fit.

Why This Part Fails

Exterior door handles are subject to repeated mechanical stress, UV exposure and occasional impacts. Common causes of failure are plastic fatigue at pivot points, snapped internal springs or clips, corrosion of metal linkages, and cosmetic damage from scratches or knocks. High-mileage vehicles or those used in harsh climates tend to show earlier failure.

Search Tips

When sourcing this part, customers often use the product code 9101GH or the color designation EVGC / Vapor Gray. Checking both the part code and the vehicle model (listed above) will improve the chance of finding the correct replacement quickly.

Product Overview

High-quality exterior left front door handle designed to replace worn or damaged original parts on selected Citroën and Peugeot models. Painted to the OEM color code (KKN – Red Aden) for a factory-fit finish, this handle restores vehicle appearance and door operation. Commonly searched by part number 9101GF, the handle is aimed at professional mechanics and experienced DIY enthusiasts who require a precise fit and correct color match.

Technical Information

• Manufacturer: Stellantis (Citroën / Peugeot)
• Model: Citroën Berlingo III, Citroën C4 II, Citroën C4 Picasso, Citroën Grand Picasso, Jumpy III; Peugeot 207, Peugeot 308, Peugeot Partner III, Peugeot Expert III
• Product Codes: 9101GF
• Additional Numbers: Color Code KKN (Paint Red Aden)

Function And Fitment

This part is an exterior left front door handle that operates the door latch mechanism to open the front left door from the outside. It is supplied painted and finished to match the vehicle body, and it attaches to the door via the original mounting points. The handle transfers user input to the latch through linkage rods or internal levers—ensure correct reassembly of all clips and rods to restore full function.

Installation Recommendations

• Recommended Tools: trim removal tools, Phillips/torx screwdrivers, pliers for retaining clips, and a suitable torque wrench if specified by the vehicle service manual.
• Basic Steps: Remove the inner door trim panel to access the handle fasteners and linkage. Detach the linkage rods and any retaining clips, remove the old handle, install the new handle into the door shell, reconnect linkage and clips, then test operation before refitting the trim.
• If The Handle Has Integrated Electronics Or Sensors: Disconnect the battery before starting work to avoid short circuits or unintended airbag/system faults. Follow safe procedures for handling electrical connectors.
• Final Check: Ensure smooth operation of locking/unlocking and exterior opening. Paint edges around the handle may require gentle cleaning after installation to remove handling marks.

Why This Part Fails Most Often

• Mechanical Wear: Repeated use can fatigue plastic components, internal pivots or clips, causing the handle to loosen or break.
• Impact Damage: Collisions, door slams, or forced entry attempts frequently crack or snap the handle housing.
• Environmental Degradation: UV exposure and temperature cycles can embrittle painted plastic, leading to flaking paint or structural failure.
• Linkage/Clip Failure: Worn or broken rods and retaining clips can make the handle feel loose or prevent it from operating the latch.

Fitment Notes

Always verify model year and door side when ordering. This handle is intended for the left front door only. Searching by the part code (9101GF) and color code (KKN) will increase the chance of finding the correct match for your vehicle. Multiple color options are available from stock for broader compatibility with different paint finishes.

Warranty And Quality

Designed as a direct replacement for original exterior door handles, this unit offers a factory-style appearance and function. Inspect the part on arrival for paint finish and correct mounting points before installation.

This exterior door handle is a direct-fit replacement designed for a range of Citroën and Peugeot models. Supplied in Aden Red (painted), it is ideal for body repairs, panel replacement or cosmetic refreshes. The part is frequently searched under product code 9101GH, so you can quickly find matching fittings or cross-references. Built to restore proper door operation and secure locking, this handle suits both professional workshops and competent DIY enthusiasts.

Features And Benefits

• Direct-fit replacement for left rear and right front/right rear doors (no major modifications required).
• Painted Finish: Aden Red (KKN) — ready to install on vehicles with matching color; other colors available from stock.
• Replaces worn, broken or cosmetically damaged handles to restore function and appearance.
• Easy to source using product code 9101GH for fast parts lookup and ordering.

Technical Information

• Manufacturer: Stellantis (Citroën / Peugeot)
• Model: Citroën C4 Picasso, Citroën Berlingo III, Peugeot 207, Peugeot 308, Peugeot Partner / Partner III, Citroën/Peugeot Jumpy III / Expert III, and compatible body variants
• Product Codes: 9101GH
• Additional Numbers: Color code KKN (Aden Red). Listing also references KNN in some records—verify color code on the part label when matching.

Compatibility

Commonly fitted to a range of models from the Stellantis group. Check fitment for specific body style and door position before ordering. Typical compatible models include:

• Peugeot 207
• Peugeot 308
• Peugeot Partner / Partner III
• Citroën Berlingo III
• Citroën C4 Picasso
• Citroën/Peugeot Jumpy III / Expert III (where applicable)

Installation Recommendations

• Prepare Tools: Trim removal tools, Torx/Screwdriver set, socket set, pliers and a torque wrench if required.
• Remove Interior Door Trim Carefully: Pry off trim clips with plastic tools to avoid damage. Detach the moisture barrier without stretching or tearing it permanently.
• Disconnect Linkages: Unclip the locking rods and any retaining clips from the old handle. Note the orientation and order of any connectors for correct reassembly.
• Unfasten Fixings: Remove bolts or screws securing the handle. Keep fasteners organized for refit; replace damaged clips or screws as needed.
• Fit New Handle: Position the new handle, reconnect linkages and secure fixings. Ensure the handle moves freely and that the locking mechanism engages smoothly.
• Check Operation: Test manual operation, central locking and key/remote function before refitting the door trim. Make any minor alignment adjustments to avoid paint contact or binding.
• Finish: Refit door trim and moisture barrier. Replace any broken clips. Clean and inspect surrounding paint to avoid future corrosion.
• Tip For Painted Handles: Protect paint during installation and avoid over-tightening fasteners that can crack painted surfaces.

Reason Why The Part Most Commonly Fails

• Mechanical Wear: Repeated use eventually wears internal components and plastic mounts, causing looseness or failure to operate.
• Broken Plastic Clips Or Mounts: Impact from doors, slamming or forced entry attempts frequently break plastic retainers inside the handle assembly.
• Corrosion And Paint Damage: Chips in the painted surface can lead to corrosion around mounting points, weakening the structure.
• Latch Or Linkage Failure: Faulty or misaligned linkages and worn latch mechanisms can make a perfectly good handle appear faulty.
• Accidental Damage: Parking impacts, vandalism or collisions are common causes of sudden handle replacement.

Notes

This part is ideal for bodyshop repairs and routine door maintenance. Use the product code 9101GH when searching for cross-references or matching painted colors. For painted items, confirm the color code on the label (KKN / KNN references appear in different records) to ensure a correct visual match.

Order now to restore secure, reliable door operation and a factory-finish appearance.

High-quality replacement left front exterior door handle designed for Citroën and Peugeot models. Built to OEM fit specifications, this black Onyx (EXY) handle offers a direct swap for mechanics and experienced DIYers seeking a durable, cosmetically matching solution. Frequently searched by product code 9101GF, this part restores reliable door operation and appearance after wear, breakage, or accidental damage.

Technical Information

• Manufacturer: Stellantis (Citroën/Peugeot OEM)
• Model: Citroën Partner III, Citroën Berlingo III, Citroën C4 Picasso, Citroën Grand C4 Picasso, Citroën Jumpy III; Peugeot 207, Peugeot 308, Peugeot Partner III, Peugeot Expert III
• Product Codes: 9101GF
• Other Numbers: Color Code EXY – Black Onyx

Features And Function

This external left front door handle operates the door latch mechanism to open the driver side door. It is manufactured to match the original exterior profile and paint finish for a seamless repair. The handle is intended as a mechanical replacement; depending on vehicle variant, it mates with the factory rods, clips and locking mechanism.

Compatibility And Fitment

Designed specifically for the listed Citroën and Peugeot models. Fitment is model- and year-dependent; verify visual match with the existing handle (shape, mounting points and paint code EXY). The part is commonly referenced by code 9101GF when searching or ordering.

Installation Recommendation

Recommended For Experienced Mechanics Or Confident DIYers. Typical Replacement Steps:

• Remove Interior Door Trim To Access Handle Mechanism (remove screws, clips and window controls as required).
• Disconnect Linkage Rods And Any Electrical Connectors If Present.
• Unscrew Retaining Fasteners From The Exterior Handle (usually Torx or Phillips screws and plastic retainers).
• Fit New Handle, Reattach Linkage Rods And Fasteners, Replace Any Damaged Clips With New Ones.
• Test Door Operation And Locking Function Before Reassembling Door Trim; Adjust Rod Position If Necessary.
• Use Proper Trim Tools To Avoid Damaging Interior Panels. Replace Worn Seals Or Clips During Reassembly.

Why The Part Most Commonly Fails

Exterior door handles typically fail due to mechanical wear and plastic fatigue from repeated use, prolonged UV exposure, freeze/thaw cycles that make plastic brittle, or impact damage from accidents and forced entry. Broken or weakened retaining clips and bent linkage rods also cause handle malfunction even if the handle itself appears intact.

Notes For Mechanics And DIYers

When replacing the handle, inspect the door latch, linkage rods and retaining clips and renew them if worn. Lubricate pivot points and the latch with a suitable automotive lubricant to ensure smooth operation. For painted handles, confirm paint code EXY matches the vehicle or consider professional paint touch-up for a perfect color match. After installation, cycle the door several times and check central locking and child-lock functions where applicable.

Product Overview

This OEM-fit left front exterior door handle is designed for a range of Citroën and Peugeot models and offers direct replacement for worn, damaged or faded factory handles. Manufactured to match original mounting points and latch linkage, the unit restores secure operation of the door latch and the vehicle’s exterior appearance. Ideal for professional workshops and DIY mechanics looking for a reliable, vehicle-specific replacement part.

Application And Fitment

Compatible With: Citroën Berlingo III, Citroën C4 II, Citroën C4 Picasso and Grand C4 Picasso, Citroën Jumpy III; Peugeot 207, Peugeot 308, Peugeot Partner III, Peugeot Expert III. Always confirm visual match with the existing handle and color code before installation. Common color code for this listing: KNY (Tivoli Blue). Other colors available from stock.

How The Part Works And Typical Failures

The exterior door handle transmits user input to the internal latch mechanism via an integrated lever and linkage. Common failure modes include plastic fatigue or breakage of lever/linkage components, corrosion of metal parts, paint wear and mechanical deformation from impact. Excessive force, frequent use, exposure to road salt and moisture, or impact (parking mishaps) are the usual causes of failure.

Replacement Frequency

Service life depends on usage and environment. In normal conditions a door handle can last many years, but in high-corrosion environments or after repeated mechanical stress it may fail within 5–15 years. Visible damage, loose movement, or intermittent latching are signs it should be replaced.

Installation Recommendations

• Tools Required: Trim removal tools, Phillips/flat screwdrivers, Torx sockets or bits as required by vehicle, ratchet, pliers. A small flashlight helps locate fasteners inside the door.
• Procedure Summary: Remove the inner door trim carefully to access the handle mounting. Detach any plastic clips and screws holding the trim (work slowly to avoid breakage). Disconnect the interior door handle rod/linkage and any electrical connectors for locks or sensors if present. Unscrew the exterior handle mounting bolts and remove the old handle. Fit the new handle, ensuring the linkage engages correctly and gaskets/seals are seated to prevent water ingress. Reconnect rods and electrical connectors, test mechanical operation and central locking before reassembling the door trim.
• Tips: Do not force plastic clips; use proper trim tools. Lightly lubricate moving metal-to-metal pivot points with white lithium or similar grease to reduce wear. Check the striker and latch condition while the door is open—worn latches can make a new handle feel loose.
• Final Check: Verify smooth opening/closing and central locking cycles. Ensure paint and handle alignment match surrounding bodywork.

Why Replacements Fail Most Often

Most failures stem from mechanical wear and environmental damage: plastic components cracking from repeated leverage, corrosion of small metal pins or springs, or accidental impact that bends the handle or linkage. Failure is frequently progressive—initially the handle may feel loose before complete breakage occurs.

Technical Information

• Manufacturer: Stellantis / Citroën / Peugeot
• Model: Citroën Berlingo III; Citroën C4 II; Citroën C4 Picasso; Citroën Grand C4 Picasso; Citroën Jumpy III; Peugeot 207; Peugeot 308; Peugeot Partner III; Peugeot Expert III
• Product Codes: 9101GF, KNYC
• Additional Numbers: Color Code KNY (Tivoli Blue)

Additional Recommendations

For professional fitment, follow the vehicle manufacturer’s panel removal procedure to avoid damaging door trim clips and wiring. If the door has electrical sensors or central locking actuators, inspect connectors and wiring for corrosion while replacing the handle. When in doubt, consult factory repair procedures or a professional technician experienced with Citroën/Peugeot door assemblies.

Product Overview

Exterior door handle designed for Citroën and Peugeot models, suitable for left rear and right front/right rear door fitment. Commonly searched under part number 9101GH and color code EXY (sometimes listed as EXYB). Built to match factory appearance and mounting points, this handle is a direct-fit replacement ideal for professional technicians and DIY enthusiasts looking for a reliable, visually matching spare part.

Key Features

• Direct replacement for factory exterior door handles on compatible Citroën and Peugeot models.
• Color: EXY – Onyx Black Paint. Multiple color options available from stock.
• Fits Left Rear and Right Front/Rear positions (check part number 9101GH for exact fitment).
• Durable materials designed for daily use and road exposure.
• Easy To Replace: Fast installation when following standard door disassembly procedures.

Applications

Compatible With (Examples):

• Citroën Berlingo III
• Citroën C4 Picasso
• Citroën Jumpy III
• Peugeot 2008
• Peugeot 207
• Peugeot 308
• Peugeot Partner III
• Peugeot Expert III

Technical Information

• Manufacturer: Stellantis / Citroën / Peugeot
• Model: Citroën Berlingo III, Citroën C4 Picasso, Citroën Jumpy III, Peugeot 2008, Peugeot 207, Peugeot 308, Peugeot Partner III, Peugeot Expert III
• Product Codes: 9101GH, EXY, EXYB
• Additional Numbers: No Additional Numbers Provided

Installation Recommendations

• Recommended For: Skilled Auto Technicians And Experienced DIY Mechanics.
• Procedure: Remove Interior Door Trim Panel To Access The Handle Mechanism. Carefully Peel Back Any Vapor Barrier. Unscrew Or Unclip The Handle Retaining Fasteners From Inside The Door. Disconnect Linkage Rods Or Cables From The Old Handle (Note The Orientation And Clip Positions). Install New Handle, Reattach Linkage, Refit Fasteners And Test Opening/Locking Function Before Refitting The Door Trim.
• Tips: Keep Track Of Small Clips And Screws; Replace Broken Clips To Ensure Proper Securing. Apply A Small Amount Of Lubricant To The Latch Mechanism If Stiff. Verify Correct Alignment And Smooth Operation Several Times After Installation.

Why The Part Fails

• Wear And Fatigue: Repeated Use Can Cause Plastic Components And Clips To Weaken Over Time.
• Impact Damage: Door Impacts Or Accidents Commonly Crack Or Break External Handles.
• Corrosion And Environmental Effects: Salted Roads And Moisture Can Affect Metal Clips Or Internal Mechanisms, Leading To Stiffness Or Failure.
• Paint Degradation: External Finish Can Fade Or Chip, Particularly On High-Contact Areas.
• Misalignment Or Faulty Latch: A Maladjusted Door Latch Can Put Extra Stress On The Handle, Causing Premature Wear.

Notes

This part is frequently searched by part number 9101GH and color code EXY/EXYB. Confirm fitment by matching the part number and the door position required. Multiple color options are available from stock to help match the original finish.

Used exterior door handle designed for Citroën and Peugeot models, fitted originally under codes 9101GH / KNYC. Ideal for professional mechanics and DIY enthusiasts looking to replace a damaged or worn handle quickly. Frequently searched by product code 9101GH, this part restores door function and appearance — available in multiple factory and matched paint finishes including KNY (Blue Tivoli).

Technical Information

• Manufacturer: Stellantis
• Model: Citroën 2008, Citroën Berlingo III, Citroën C4 Picasso, Peugeot 207, Peugeot 308, Peugeot Partner III, Jumpy III, Expert III (check door position compatibility)
• Product Codes: 9101GH, KNYC
• Other Numbers: Color Code KNY (Paint Blue Tivoli)
• Suitable For: Left Rear Door, Right Front Door, Right Rear Door

Function And Typical Faults

The door handle provides mechanical engagement between the exterior grip and the internal latch mechanism, allowing opening and closing of the door. Common failures are broken plastic mounting tabs, worn internal levers, corrosion of metal components, or damage from impacts (parking accidents, door slams). Electric locking systems attached to the door may remain functional while the exterior handle assembly breaks, preventing manual opening.

Why The Part Most Commonly Fails

• Mechanical Wear: Repeated use causes plastic clips and internal pivots to fatigue and snap.
• Corrosion: Exposure to moisture and road salt can corrode metal linkages and fasteners.
• Impact Damage: Door impacts or vandalism can crack or deform the handle housing.
• Paint Degradation: Exterior finish may peel or fade, prompting replacement for cosmetic reasons.

Installation Recommendation

• Required Tools: Trim panel tools, Torx/hex sockets, ratchet, screwdriver and pliers.
• Procedure Overview: Remove interior door trim to access the handle mechanism; detach linkage rods and electrical connectors (if present); remove retaining bolts or clips; replace handle and reattach linkages; reassemble trim and test operation.
• Best Practice: Ensure plastic clips are correctly seated and not overstressed. Protect painted surfaces during installation and verify smooth operation of latch and lock after fitting.
• Electrical Precautions: If the door contains electrical connectors for remote locking or sensors, handle connectors carefully to avoid damage. Follow the vehicle manufacturer’s guidance when working near electronic modules.

Notes For Mechanics And DIYers

Search By Product Code 9101GH Or KNYC For Quick Compatibility Checks. Because paint shades may vary between production batches and model years, match color code KNY when possible or plan for local repainting if exact color match is required. Replacement is straightforward for a competent technician but pay attention to clip condition — replacing damaged clips during installation prevents rattles and future failure.

Additional Advice

There Is No Fixed Replacement Interval; Lifetime Depends On Usage And Environmental Exposure. Regular visual inspection and lubrication of moving linkages can extend service life. For vehicles exposed to coastal or salted-road conditions, inspect and clean door internals more frequently to prevent corrosion.

Product Description

High-quality left front exterior door handle compatible with multiple Citroën and Peugeot models. Designed to restore reliable door operation after wear, impact, or plastic breakage. The handle is supplied in Color EWP (Banquise White Paint) and we also keep various other colors in stock to match vehicle finishes. Ideal for professional workshops and DIY mechanics who need a direct-fit replacement part identified frequently by the product code EWPB 9101GF.

Key Features

• Direct Replacement For Factory Door Handle Assembly
• Painted Finish: EWP Banquise White; Other Colors Available
• Compatible With Central Locking Systems Where Applicable
• Durable Plastic And Metal Internal Components For Everyday Use
• Commonly Searched By Code: EWPB 9101GF / 9101GF

Compatibility

Fits The Following Models: Citroën Berlingo III, C4 II, C4 Picasso And Grand C4 Picasso, Jumpy III; Peugeot 207, 308, Partner III, Expert III. Always Verify Model Year And Door Position When Ordering.

Technical Information

• Manufacturer: Stellantis (Citroën / Peugeot)
• Model: Berlingo III; C4 II; C4 Picasso; Grand C4 Picasso; Jumpy III; 207; 308; Partner III; Expert III
• Product Codes: EWPB 9101GF
• Other Numbers: 9101GF

How The Part Functions

The exterior door handle Transfers Manual Force To The Door Latch Mechanism Via Linkages Or Cables, Allowing The Door To Open From The Outside. On Vehicles With Central Locking, The Handle Also Houses Or Interacts With Lock Cylinder Components And Electrical Actuators. Proper Fitment Ensures Smooth Operation And Correct Engagement With The Latch.

Common Failure Modes And Why They Occur

• Plastic Fatigue And Breakage Of Mounting Tabs Due To Repeated Use Or Forceful Operation.
• Internal Mechanism Wear Or Corrosion From Moisture Ingress, Leading To Stiff Or Nonfunctional Operation.
• Impact Damage From Accidents Or Vandalism Causing Cracks Or Deformation.
• Frozen Or Seized Linkages In Cold Climates Causing Excessive Load On The Handle.
• Failure Accelerated By Sunlight (UV) And Temperature Cycling That Degrades Plastics.

Replacement Frequency

There Is No Fixed Interval For Replacement. Handles Typically Last Many Years Under Normal Use, But Heavy Use, Environmental Exposure, Or Accidental Damage Will Shorten Service Life. Inspect Handles During Routine Bodywork Or When Lock/Opening Issues Are Reported.

Installation Recommendation

• Disconnect The Battery When Working Near Electrical Connectors To Avoid Short Circuits.
• Remove The Interior Door Trim Panel To Access Mounting Screws, Linkages, And Electrical Plugs.
• Carefully Disconnect Door Lock Cables Or Rods And Any Electrical Connector For Central Locking Sensors Or Switches.
• Remove Retaining Screws Or Nuts Securing The Handle, Replace The Handle, And Reassemble In Reverse Order.
• Check And Replace Any Broken Clips Or Fasteners To Ensure A Secure Fit And Prevent Rattles.
• Lubricate Latch Pivot Points And Test Door Operation Several Times After Installation; Verify Central Locking Function Where Applicable.
• For Complex Cases Or If Structural Damage Is Present, Seek Professional Installation.

Why This Part Is Useful For Professionals And DIY Mechanics

Identifying The Correct Part By Product Code EWPB 9101GF Saves Diagnostic Time. The Handle Is A Cost-Effective Repair For Common Door Operation Faults, Restoring Proper Function Without Replacing The Whole Door Assembly. Available In Painted Finish To Match Body Color, Which Reduces Additional Preparatory Work.

Exterior door handle designed as direct replacement for many Citroën and Peugeot models. Ideal for professional garages and DIY mechanics who search by product code (e.g. 9101GH). The part restores reliable opening and closing of the door, matches factory paint when ordered in the EWP (White Banquise) finish and is available in a range of other colours to suit common OEM livery. Fitment is straightforward for technicians familiar with door trim removal; the unit is intended for use on left rear and right front/right rear doors depending on the vehicle layout.

Technical Information

• Manufacturer: Stellantis (Citroën / Peugeot)
• Model: Citroën Berlingo III, Citroën Berlingo B9, Citroën C4 Picasso, Citroën Jumpy III; Peugeot 2008, Peugeot 207, Peugeot 308, Peugeot Partner (including Partner Tepee), Peugeot Expert III / Jumpy family
• Product Codes: 9101G, 9101GE, 9101GH
• Other Numbers: EWP (Paint Code) – White Banquise; EWPB / 9101GH (common seller references)

Installation Recommendations

• Work In A Clean, Well-Lit Area: Keep small fasteners and clips organized to avoid loss.
• Tools Needed: Trim removal tools, Torx/hex drivers or screwdrivers as required by the specific model, small socket set, needle-nose pliers.
• Removal Steps (General Guide): Remove interior door trim carefully using trim tools, disconnect the door handle linkage (rod or cable) and any electrical connector for central locking or sensors, remove retaining screws/bolts securing the handle, then withdraw old handle from door skin.
• Fitting Steps: Insert new handle into the door aperture, secure with original fasteners, reconnect linkage and any electrical plugs, refit door trim and test mechanical operation and central locking before finishing.
• Testing: Check smooth operation of latch, confirm central locking cycles correctly and verify door closes and seals without interference.
• Professional Tip: Replace any damaged clips or weakened linkage components at the same time to avoid repeat removal.

Most Common Failure Causes

• Mechanical Wear: Repeated opening/closing over years causes plastic or metal components inside the handle to fatigue and eventually fracture.
• Impact Damage: Minor collisions or slamming can crack the handle body or deform mounting points.
• Corrosion And Environmental Stress: Moisture ingress, road salt and temperature changes can accelerate wear of metal parts and clips.
• Linkage Or Clip Failure: Often the handle itself is fine but the connecting rod, cable or retaining clips break, producing the same symptom of a non-working handle.
• Paint And Finish Damage: Scratches or flaking paint (especially on painted handles) are cosmetic but often prompt replacement for appearance reasons.

Why Choose This Replacement

This door handle corresponds to commonly referenced part numbers used by professional workshops and part lookup systems, making it easy to find and order. It is a practical, cost-effective repair for restoring door function and appearance on Citroën and Peugeot models listed above. Suitable for both experienced technicians and competent DIYers who follow manufacturer procedures and use the correct tools.

Additional Notes

When ordering, check the colour and the exact side/position required (left rear, right front, right rear) and compare the product code listed on your parts diagram or purchase reference. The unit is supplied in the paint code EWP (White Banquise) when specified; other colours are available from stock.