Description

OEM-fit Exterior Door Handle Designed For Peugeot 3008 I And 5008 I. This painted left front driver door handle (part codes 9101KJ / EPYD) replaces the worn or damaged original and restores correct operation and appearance. The unit is finished in Ruby Red paint (color code EPY) for a factory-matched look. Ideal For Professional Workshops And DIY Mechanics Who Need A Direct-Fit, Ready-To-Install Replacement.

Technical Information

• Manufacturer: Stellantis / Peugeot
• Model: Peugeot 3008 I, Peugeot 5008 I (First Generation)
• Product Codes: 9101KJ, EPYD
• Other Numbers: Color Code EPY – Ruby Red

Installation Recommendation

Designed For Fast Replacement In A Workshop Environment. Typical Replacement Steps:

• Remove Interior Door Trim Using Proper Trim Tools To Avoid Damaging Clips And Upholstery.
• Disconnect Any Linkages, Cables Or Electrical Connectors Associated With The Handle Or Central Locking.
• Unscrew And Remove The Old Handle Assembly From The Exterior Mounting Points.
• Fit The New Handle, Ensure Correct Engagement Of The Locking Mechanism And Linkages, Then Tighten Fasteners To Manufacturer Specifications.
• Reconnect Electrical Connectors Where Present, Refit The Door Trim And Test Locking, Latching And Handle Movement Several Times.

Use Appropriate Trim Tools And Torque Settings. Protect Painted Surfaces During Installation And Verify Smooth Operation Before Finishing.

Most Common Failure Reasons

• Mechanical Wear: Frequent Use Causes Internal Levers Or Sprung Clips To Wear Or Break.
• Impact Damage: Parking Impacts Or Attempts At Forced Entry Can Crack The Handle Or Break Mounting Points.
• Environmental Degradation: UV Exposure And Temperature Cycles Lead To Paint Fading And Plastic Brittle Failure Of Clips.
• Corrosion: Metal Components And Fasteners Can Corrode, Especially In Regions With Road Salt, Leading To Stiff Or Jammed Operation.
• Paint Damage: Chips From Stones Or Keys Can Expose Underlying Material, Accelerating Wear And Rust.

Remarks

This Part Offers A Direct-Replacement Fit For Vehicles Specified Above. Because Exterior Paint Tone Can Vary Over Time Due To Sun Exposure, New Painted Handles May Show Slight Shade Differences Compared To Aged Panels. Inspect Mounting Points And Linkages During Replacement To Ensure Long-Term Reliability.

Exterior door handle for Peugeot 3008 I and 5008 I in Ruby Red (EPY). Ideal for professional workshops and DIY mechanics searching by part code 9101KH or EPYD. This replacement outer handle restores door opening function and appearance while matching factory paint. Suitable for vehicles with mechanical or central-locking actuation; ensure compatibility with your door lock cylinder arrangement before installation.

Key Benefits

Durable exterior finish matched to factory Ruby Red paint. Direct-fit design for clean installation, reduces installation time in bodyshop and garage settings. Restores proper latch actuation and prevents water ingress around the handle area when fitted correctly.

Technical Information

• Manufacturer: Stellantis / Peugeot
• Model(s): Peugeot 3008 I, Peugeot 5008 I (First Generation)
• Product Codes: 9101KH, EPYD
• Other Numbers: Color Code EPY – Ruby Red

Fitment

Specifically produced for the right front door and both left and right rear doors on first-generation Peugeot 3008 and 5008 models. Check side and door position when ordering (Right Hand Drive vs Left Hand Drive does not affect side designation for the handle itself).

How To Replace (Overview)

1. Remove interior door trim: unscrew fasteners and carefully pry trim clips to avoid damage.
2. Peel back the waterproof membrane to access the inner door shell.
3. Disconnect any electrical connectors if the handle has sensors or switches.
4. Unbolt or unclip the handle from the inside of the door. Detach linkage rods from the latch mechanism.
5. Transfer lock cylinder or trim pieces if required, then fit the new handle and reconnect linkage.
6. Test mechanical movement and central locking operation before reassembling the door panel.
7. Reattach the waterproof membrane and interior trim, ensuring all clips and screws are secure.

Mounting Recommendations

Work On A Flat Surface And Keep Parts Organized. Use Proper Trim Tools To Avoid Breakage Of Clips. Lubricate Moving Linkages With Suitable Grease (e.g., White Lithium) To Prevent Stiff Operation. Tighten Fasteners Evenly Without Over-Torquing; Replace Any Damaged Clips Or Gaskets To Maintain Water Tightness. After Installation, Check Door Alignment And Central Locking Function On All Doors.

Why This Part Most Commonly Fails

• Mechanical Wear: Frequent use leads to worn pivots or weakened plastic components inside the handle mechanism.
• Impact Damage: Door hits, parking lot knocks or forced entry attempts can crack the handle or break mounting tabs.
• Corrosion And Environmental Stress: Salt, moisture and dirt can corrode metal linkages or cause paint and seal deterioration—more common in colder climates.
• Broken Clips And Fasteners: Interior mounting clips are often plastic and can fail during previous repairs or from vibration over time.

Notes

When replacing, compare the part codes printed on the old handle to the Product Codes listed above (9101KH / EPYD) and confirm color code EPY for paint match. Professional installation is recommended for best fit and sealing, especially on vehicles with integrated central-locking switches or alarm sensors in the handle area.

Original inner right door handle (front and rear) for Citroën and Peugeot cars in HVV – Silver design. This is a used, fully functional OEM part from disassembly. Often searched under 98201552VV and 98000002VV (PSA). Ideal replacement for a damaged or loose handle; dimensions and mounting correspond to the original, assembly is quick and without modifications.

Main advantages
– Genuine PSA/OEM part – precise fit, reliable function
– The right color and HVV finish (Silver) to match the interior
– Suitable for right front and rear doors (LHD – European cars)
– Quick replacement, compatibility verifiable by part number

Technical information
– Name: inner door handle, right (synonyms: handle, handle, door opening lever)
– Location: right side (passenger’s side for cars with left-hand drive); use on front and rear doors depending on equipment
– Color/design: HVV – Silver
– OEM/PSA part numbers: 98201552VV, 98000002VV
– Condition: used part, fully functional; may bear normal cosmetic traces of use
– Assembly: screwed attachment, connection to the lock rod; without the need for modifications
– Packaging/Contents: We deliver what is shown in the product photos

Compatibility (selected models and years/equipment)
– Citroën C4 II
– DS4
– Peugeot 208
– Peugeot 308 T9
– Peugeot 3008 I
– Peugeot 5008 I
– Peugeot 508
Note: Actual compatibility may vary by year of manufacture and equipment. Before ordering, we recommend checking against OEM number 98201552VV / 98000002VV or VIN.

For whom and why
– For car mechanics and DIYers: quick replacement of the original without working with non-original parts
– Solves typical problems: loose handle, cracked lever, non-functioning opening from the interior
– From an economic point of view: a quality used original often lasts longer than a cheap new product

Assembly tips
– Before assembly, compare the shape, fit and end of the tie rod with the old part
– Work with clean plastics, we recommend lightly lubricating the mechanical contact surfaces
– If you are only changing one side, check the HVV – Silver color match with the other side

SEO/numbers for easy tracking
– 98201552VV, 98000002VV, 9820 1552 VV, 9800 0002 VV
– inner handle right Citroën Peugeot, door handle right, door opening handle HVV Silver

Need to check compatibility? Send us the VIN – we will check if the crank 98201552VV / 98000002VV is suitable for your car.

Original inner door handle – left (L) for Citroën/Peugeot cars in the color HVV Silver. This is a used, fully functional part from disassembly, suitable as a direct replacement for the original handle. Often searched under OEM numbers 98201553VV and 98000001VV.

Main advantages
– Genuine PSA part: exact fit, correct color and finish
– Compatibility with the left front and rear doors of selected models
– Quick replacement – it is usually enough to transfer the original screws and the lock rod/cable
– Savings compared to a new part, while full functionality

Technical information
– Location: door interior (inside handle)
– Side: left (driver’s side for cars with a steering wheel on the left)
– Position: front left and rear left door (depending on model equipment)
– Color/surface: HVV – Silver
– OEM/cat. numbers (PSA): 98201553VV, 98000001VV
– Material: high-quality plastic with decorative silver finish
– Condition: used original, fully tested; may bear minor cosmetic traces of normal use

Compatibility according to PSA models
– Citroën: C4 II, DS4
– Peugeot: 3008 I, 5008 I, 308 T9
– Furthermore, in practice it is found in some versions of 208 and 508 (verify by OEM number or VIN)
Note: Compatibility may vary by year of manufacture and specific equipment. The safest bet is to compare the part numbers on your original crank.

How to correctly verify the suitability of a part
– Check OEM number match: 98201553VV, 98000001VV
– Compare the color/finish of the HVV Silver with the original part
– In case of uncertainty, send us the VIN – we will verify compatibility for you

Assembly tip
– When replacing, transfer the original cable/rod and fasteners (if not included). Replacement is usually quick and manageable at home with basic tools.

Keywords for easy search
interior door handle left, Citroën door handle, Peugeot handle, HVV Silver, 98201553VV, 98000001VV, original PSA part, door handle, door opening interior

Looking for a reliable, accurate replacement without tedious customization? This original left inner handle in HVV Silver is an ideal choice for quick repair and professional service.

Product Overview

High-quality exterior left rear door handle designed for a range of Citroën and Peugeot models. This color-matched unit (ELS Almond Green) replaces a broken, cracked or worn original handle and restores reliable door opening and locking operation. Ideal for professional workshops and DIY mechanics looking for a direct-fit replacement with OEM cross-reference 1609240780 / 980297831T. The handle is supplied ready for fitment to the driver-side rear door and is intended to match factory paint for a seamless finish.

Key Benefits

• Direct Fit For Multiple Models: Minimizes modification and installation time.
• Color Matched (ELS Almond Green): Reduces need for repainting and simplifies bodywork.
• Restores Proper Operation: Replaces worn mechanisms, broken lever or damaged mounting points.
• Suitable For Workshops And Home Mechanics: Clear fitment and serviceability.

Technical Information

• Manufacturer: Stellantis (Citroén / Peugeot)
• Model: Citroën C3 III; Citroën C4 Picasso; Citroën Berlingo III; Peugeot 308; Peugeot 3008; Peugeot 5008; Peugeot Partner III; Peugeot Rifter
• Product Codes: 1609240780, 980297831T
• Other Numbers: ELSB (Color Code / Paint Reference: Almond Green)

Installation Recommendation

Replacement is straightforward for anyone with basic workshop tools. Typical procedure:

• Remove Interior Door Trim: Carefully pry off the door card using trim tools to avoid breaking clips.
• Disconnect Linkages: Unclip or unfasten the door latch rods and any electrical connectors for central locking or sensors if present.
• Remove Fasteners: Unscrew or unbolt the handle retaining screws from the inner door shell.
• Extract Old Handle: Pull the old handle out from the outside and free any remaining clips or seals.
• Fit New Handle: Position the new handle, secure the retaining fasteners, reconnect the rods and connectors, and test mechanical and locking function before reassembling the door card.
• Final Check: Ensure smooth operation of the handle and central locking. Replace any worn clips or seals to prevent rattles or water ingress.

Most Common Failure Reasons

• Plastic Fatigue And Breakage: Repeated use and mechanical stress lead to cracking of plastic components.
• Corrosion Or Seizure: Moisture ingress and salt accelerate corrosion on metal fasteners and pivot points, causing stiff or failed operation.
• Damaged Linkage Clips Or Rods: Broken or deformed clips cause the handle to operate loosely or fail to open the latch.
• External Impact Or Vandalism: Physical damage from bumps, attempted break-ins or accidents frequently cracks or detaches the handle.
• Paint Wear And Surface Damage: Scratches and paint failure around the handle area compromise appearance and can expose substrate to corrosion.

Notes For Purchase

Check the part numbers (1609240780, 980297831T) and the color code (ELS / Almond Green) against the vehicle requirement to ensure correct fit and finish. This handle is intended for the left rear (driver-side rear) door.

Replacement Right-Side Door Handle Designed For Professional Workshops And DIY Enthusiasts. This OE-Fit Handle With Codes 1609239680 / 980297821T (ELSB) Offers Direct Compatibility With Multiple Stellantis Models, Ensuring Correct Fit, Function, And Finish. The Almond Green Painted Surface Matches Factory Color ELS For A Clean Visual Match On Vehicles With The Same Paint Option. Commonly Searched By Part Number 1609239680, This Handle Is Ideal For Mechanics Looking For A Reliable Passenger-Side Front Or Rear Replacement.

Key Features

• Direct Fit For Passenger-Side Front And Rear Doors (Right Side)
• OEM Compatibility With Citroën And Peugeot Models Listed Below
• Painted Finish: ELS Almond Green For Visual Match To Original Bodywork
• Robust Mechanism Designed For Everyday Use And Central Locking Integration
• Easy Identification By Product Codes 1609239680, 980297821T, ELSB

Technical Information

• Manufacturer: Stellantis / Citroën / Peugeot
• Model: Citroën C3 III; Citroën C4 Picasso; Citroën Berlingo III; Peugeot 308; Peugeot 3008; Peugeot Partner III
• Product Codes: 1609239680; 980297821T; ELSB
• Other Numbers: Paint Code ELS (Almond Green)

Function And Typical Failure Modes

The Door Handle Operates The Latch Mechanism To Open The Door From The Outside And Interfaces With The Lock/Central Locking Mechanism. Common Reasons For Failure Include Mechanical Wear Of Internal Plastic Or Metal Components, Broken Mounting Tabs Or Clips Due To Force Or Impact, Corrosion Of Internal Linkages, And Paint Or Surface Damage From Road Debris. Failures Most Often Manifest As Stiff Operation, Intermittent Release, Or Complete Breakage Of The Lever Or Mounting Points.

How To Replace

Basic Replacement Steps (General Guidance):

• Remove The Interior Door Trim Panel To Access The Handle Mechanism And Linkages.
• Peel Back The Moisture Barrier Carefully To Avoid Tearing.
• Disconnect The Rods Or Clips That Link The Handle To The Latch (Note Their Orientation For Reassembly).
• Unscrew The Fasteners Securing The Exterior Handle And Remove The Old Handle.
• If Required, Transfer The Lock Cylinder Or Any Retaining Clips From The Old Unit To The New One.
• Fit The New Handle, Reinstall Fasteners, Reconnect Linkages, And Test Mechanically And Electrically (Central Locking Where Applicable).
• Reassemble The Door Trim And Verify Smooth Operation And Proper Locking.

Installation Recommendations

• Use Appropriate Trim Tools To Prevent Damage To Interior Panels And Paint.
• Inspect The Linkage Clips And Fasteners; Replace Any Damaged Clips To Ensure Reliable Operation.
• Lubricate Moving Linkages Lightly With Suitable Grease To Reduce Wear And Noise.
• When Replacing A Painted Handle, Protect Surrounding Paintwork During Removal And Installation.
• After Installation, Test Door Opening, Latching, And Central Locking (If Present) Several Times To Confirm Correct Function.

Why This Part Most Commonly Breaks

Door Handles Suffer From Repeated Mechanical Stress, Exposure To Moisture And Road Salts, And Occasional Impacts (Parking Scrapes Or Minor Collisions). Internal Plastic Clips And Levers Are Typical Weak Points That Degrade Over Time, While Corrosion Can Cause Linkages To Seize. UV Exposure And General Wear Can Also Affect Painted Finishes, Leading Owners To Replace Handles For Both Functional And Cosmetic Reasons.

This OEM-style left front exterior door handle is designed for direct replacement on a range of Citroën and Peugeot models. It fits driver-side doors and includes a cutout for a mechanical key cylinder, preserving original locking function and appearance in Almond Green (ELS) finish. The part is suitable for mechanics and experienced DIYers who need a reliable exterior handle to restore proper door opening, locking and to match factory paint.

Technical Information

• Manufacturer: Stellantis / Citroën / Peugeot
• Model: Citroën C3 III, Citroën C4 Picasso, Citroën Berlingo III, Peugeot 308, Peugeot 3008, Peugeot Partner III
• Product Codes: 1609240280, 980297811T, ELSB
• Other Numbers: Color Code ELS (Almond Green)

Function And Features

The handle provides the mechanical interface for opening the driver-side front door and accommodates the key cylinder for manual locking/unlocking. It houses the lever that actuates the door latch and interfaces with the interior release rod/cable and central locking actuator. The Almond Green (ELS) finish is matched to factory paint for a consistent exterior appearance.

Installation Recommendations

• Prepare: Work on a stable surface and have basic trim tools and a small ratchet set available.
• Door Trim Removal: Remove the inner door panel carefully to access the handle mounting screws, retaining clips and rods. Protect trim clips to avoid breakage.
• Disconnect Linkages: Detach the latch rod/cable and any electrical connector for a handle-mounted switch (if present).
• Remove Old Handle: Unscrew or unclip the handle from the exterior mounting points. Keep track of screws and spacers for reuse or replacement.
• Fit New Handle: Position the replacement handle, reconnect the latch rod/cable and ensure the key cylinder aligns correctly with the cutout. Secure all fasteners to the original torque if available.
• Test Before Reassembly: Operate the handle from outside and inside, operate the key cylinder and verify central locking function before refitting the door trim.
• Final Checks: Ensure paint edges are not pinched, that the handle moves freely, and that weather seals sit correctly to prevent leaks.

Why The Part Typically Fails

• Mechanical Wear: Repeated use causes internal lever wear and weakened mounting tabs, eventually leading to loose or non-functioning handles.
• Impact Or Vandalism: Physical damage from impacts or forced entry can crack the handle or distort attachment points.
• Corrosion And Environmental Damage: Moisture and road salts can corrode metal components and seize moving parts or deteriorate plastic clips.
• Key Cylinder Wear: When present, the key cylinder can wear or seize, which affects the entire handle assembly operation.
• Broken Plastic Clips/Tabs: Common failure on aging vehicles where plastic fastening tabs become brittle and break during operation or removal.

Notes For Mechanics And DIYers

When replacing the handle, inspect the door latch, actuator and linkage for wear or damage and replace any worn clips or rods at the same time to ensure long-term reliability. Use appropriate corrosion protection on metal fasteners and avoid over-tightening screws that could crack the new handle’s mounting points. After installation, verify that the lock cylinder (if reused) is lubricated and operates smoothly.

Compatibility And Fitment

This handle is listed for the models above and commonly referenced by product codes 1609240280 and 980297811T. Always compare the appearance, mounting points and keyway orientation with the original part before fitting to ensure correct match.

This exterior left front (driver) door handle is a direct-fit replacement designed for first-generation Peugeot 3008 and 5008 models. Supplied in EZRC aluminum-grey paint finish and referenced under code 9101KJ, the part restores exterior appearance and reliable door opening function. It is suitable for professional garages and DIY mechanics who need an OEM-compatible replacement handle that matches factory fitment and finish.

Key Features

• Direct replacement for Left Front (Driver) Door Handle.
• Painted Finish: EZRC – Aluminum Grey (LAK ŠEDÝ ALUMINIUM).
• Manufacturer Reference / Product Code: 9101KJ.
• Fitment: Peugeot 3008 I and Peugeot 5008 I (first generation).
• Designed to match original mounting points, clips and fastening holes for straightforward installation.

Technical Information

• Manufacturer: Stellantis / Peugeot
• Model: Peugeot 3008 I, Peugeot 5008 I
• Product Codes: 9101KJ
• Additional Numbers: EZRC (Paint/Finish Code)

Installation Recommendations

Replace the handle with the door trim removed for full access to mounting bolts and linkage. Typical replacement steps:

1. Prepare tools: trim removal tools, screwdriver set, Torx bits or sockets as required, and replacement retaining clips if damaged.
2. If the door has electrical components (central locking sensors, microswitches), isolate the battery before disconnecting connectors to avoid short circuits.
3. Remove door card carefully to avoid breaking plastic clips. Peel back vapor barrier without tearing for reassembly.
4. Detach linkage rods or cables from the old handle and unbolt the handle fastenings. Keep track of washers and spacers.
5. Fit the new handle, reconnect rods/cables, secure fasteners to original torque, and check smooth operation of latch and lock.
6. Reinstall door trim and test door opening, locking, and central locking operation several times to ensure correct alignment.

Use replacement retaining clips if the originals are worn or broken. Minor paint touch-up may be required if alignment exposes gaps. Verify that striker and latch align properly after installation to avoid rubbing or incomplete closing.

Why This Part Most Often Fails

• Mechanical Wear: Repeated use causes plastic components, pivot points or internal levers to weaken and eventually break.
• Clip And Fastener Damage: Door trim removal or impacts often break retaining clips, causing the handle to become loose or misaligned.
• Corrosion And Moisture Ingress: Water entering the door can corrode metal linkages or cause seizing of moving parts.
• Impact Damage: Collisions or door impacts can crack the handle or deform mounting points.
• Misadjustment: Incorrectly adjusted linkage or a damaged latch can overload the handle mechanism and accelerate failure.

Compatibility & Notes

Intended For: Left Front (Driver) Position On Peugeot 3008 I And Peugeot 5008 I. Check The Product Code 9101KJ And Paint Code EZRC When Matching To Vehicle Exterior Finish. This Part Replaces The Exterior Door Handle Assembly And Should Fit Original Mounting Points On The Specified Models.

For a reliable repair, replace any damaged clips or linkage at the same time and test the door operation multiple times after installation. Suitable For Professional Fitment Or Confident DIY Mechanics Looking For A Factory-Looking Replacement.

Exterior door handle finished in EZRC Gray Aluminium, designed for mechanics and DIY enthusiasts working on Peugeot 3008 and 5008 (first generation). This replacement part matches the original appearance and mounting points, making it a direct-fit option for restoring exterior trim and door function. Commonly searched under code 9101KH, the handle is suitable for restoring damaged or worn door handles after impacts, plastic breakage or finish deterioration.

Technical Information

• Manufacturer: Stellantis (Peugeot / Citroën)
• Model: PEUGEOT 3008 I, PEUGEOT 5008 I
• Product Codes: 9101KH
• Additional Numbers: EZRC; Color: Gray Aluminium (LAK ŠEDÝ ALUMINIUM)

Fitment And Function

This handle is intended for the right front door and both left and right rear doors on first‑generation Peugeot 3008 and 5008 models. It operates the door latch mechanism and, depending on vehicle equipment, may work together with central locking rods or electronic actuators. The part restores normal opening/closing and external aesthetics.

Typical Failure Modes

Door handles of this design most often fail due to mechanical stress and plastic fatigue: broken mounting tabs, snapped levers, or wear on pivot points. Additional causes include impact damage (parking collisions or vandalism), corrosion of internal metal parts, and paint/finish peeling after long exposure to weather. Handles on vehicles with frequent heavy use or cold climates can become stiff or crack when frozen.

Replacement Procedure (Overview)

Replacement requires basic workshop skills and common tools.

• Remove interior door trim panel to access handle mounting bolts and linkage.
• Disconnect any electrical connectors or central locking rods attached to the handle.
• Unscrew or unclip the handle retaining bolts/screws and free the old handle from the door shell.
• Fit the new handle into position, reconnect linkage and connectors, and secure fasteners to original locations.
• Test latch and locking function before refitting the door trim and finalizing assembly.

Installation Recommendations

• Keep door clips and insulating foam intact where possible; replace any damaged clips to avoid rattles.
• Lightly lubricate pivot points and latch contact areas with suitable grease to ensure smooth operation.
• Check alignment and smooth operation of the latch before reassembling the door trim.
• If the vehicle has electric components near the handle (sensors, switches, or actuators), handle wiring carefully and disconnect the battery if required by the vehicle repair manual.
• Use appropriate trim tools to avoid damaging panels; if unsure, have the replacement performed by a professional technician.

Why Replace This Part

Replace the handle when it is cracked, loose, does not return to its rest position, or when the paint/finish is severely damaged. A faulty exterior handle can prevent door entry or cause secondary damage to the latch assembly if left unattended.

Search Tips: Customers often find this part by the code 9101KH or by searching for EZRC Gray Aluminium door handle for Peugeot 3008 / 5008.