Product Description

This radio surround with integrated air vents is a direct-fit interior trim piece designed for Peugeot 206 dashboards. Manufactured to match the original interior finish, it restores the central dashboard area around the radio and ventilation outlets. Ideal for mechanics and DIY enthusiasts replacing cracked frames, broken vent louvers or faded trim, this part improves both appearance and airflow control. Common search terms: Peugeot 206 radio surround, dashboard trim, air vent frame, part number 8211C4.

Compatibility

Designed For: Peugeot 206. Check the dashboard layout and radio size to confirm visual fitment; this frame is intended for standard Peugeot 206 center consoles with integrated vents. Part Number: 8211C4.

How To Replace

Replacement is straightforward for experienced technicians and competent DIYers. General steps:

• Prepare: Park vehicle on level ground, engage parking brake and remove the ignition key.
• Trim Removal: Use plastic trim tools to carefully pry around the edges of the center trim to avoid damaging surrounding panels. Work evenly to release retaining clips.
• Disconnect Components: Once free, pull the frame forward to access the radio and vent linkages. Disconnect any electrical connectors or cable linkages only if necessary.
• Swap And Refit: Fit the new frame into position, ensuring vent louvers and clip locations align. Press evenly to engage clips and refit any screws removed during disassembly.
• Final Check: Verify vent operation and radio fitment. Confirm there are no loose panels or rattles.

Installation Recommendations

• Use Proper Tools: Employ plastic trim removal tools to prevent scratched surfaces and broken clips.
• Replace Damaged Clips: If original retaining clips are broken or worn, replace them to ensure a secure fit.
• Check Vent Louvers: Before installation, confirm louvers move freely and are not obstructed by debris.
• Work Carefully Around Electronics: Avoid forcing connectors; if unsure about airbag or steering column work, consult a professional.

Most Common Failure Causes

Plastic trim frames and vent assemblies on Peugeot 206 typically fail due to mechanical stress and environmental exposure. Common issues include brittle or snapped mounting tabs and clips from repeated removals, cracked frames from impacts, and UV-related fading or discoloration. Vent louvers can become stiff or broken from debris buildup or aggressive handling during repairs.

Technical Information

• Manufacturer: Peugeot (Stellantis)
• Model: Peugeot 206
• Product Codes: 8211C4
• Additional Numbers: Color Code HYE – Quicksilver Grey

Notes For Professionals

This part is aimed at quick cosmetic and functional repairs of the central dashboard on Peugeot 206. When replacing the frame, inspect surrounding clips and fasteners and address any underlying damage that may compromise fitment. Proper preparation and gentle handling during removal will extend the life of both the new part and adjacent interior components.

This replacement radio bezel with integrated air vents is designed for the Peugeot 206 dashboard and restores the factory look and ventilation function after damage or wear. The part fits into the centre console, holds the head unit or blanking panel and directs airflow from the central vents. Supplied in Vesma Grey (Color HYF), it is an ideal choice for mechanics and DIY enthusiasts seeking a direct-fit trim piece that matches original interior styling.

Technical Information

• Manufacturer: Stellantis (Peugeot/Citroën)
• Model: Peugeot 206
• Product Codes: 8211C5
• Other Numbers: None known

Features And Benefits

• Direct-fit bezel designed to match the original Peugeot 206 dashboard contours.
• Integrated central vents to maintain proper cabin airflow and ventilation control.
• Color-matched finish (Vesma Grey HYF) for a factory-correct appearance.
• Suitable for professional workshops and competent DIY repairers looking to restore interior aesthetics.

Recommended Installation

Replacement is straightforward for experienced technicians and competent DIYers. Typical steps:

1. Prepare trim removal tools (plastic pry tools), Torx/Phillips screwdrivers as required and a clean work area.
2. Remove surrounding trim pieces and the old radio or blanking plate following Peugeot 206 trim removal procedures.
3. Carefully release the retaining clips of the existing bezel; avoid excessive force to prevent damage to mounting points.
4. Disconnect any electrical connectors attached to ventilation controls if fitted, then remove the old bezel.
5. Position the new frame, engage clips and refit screws or fasteners. Reconnect any electrical connectors and test vents and radio fitment before reassembling surrounding trims.
6. After installation, check that vents are adjustable and that the radio or panel seats flush with the new bezel.

Why This Part Commonly Fails

Bezel damage on Peugeot 206 models most often results from physical impact (minor collisions or forceful removal), sun exposure that makes plastic brittle over time, or repeated removal/installations when servicing the radio or HVAC controls. Mounting clip breakage and surface wear/discoloration are typical failure modes on older vehicles.

Notes For Buyers

Check the colour code (HYF) to ensure the trim matches your vehicle interior. This bezel is intended as a cosmetic and functional replacement for the centre dash area of the Peugeot 206; verify physical fitment against the original part number 8211C5 before installation.

Who Should Fit This Part

Recommended for professional auto technicians and experienced DIYers. If you are unfamiliar with dashboard disassembly or HVAC connectors, consult workshop documentation or a service manual for the Peugeot 206 to avoid damaging adjacent components.

This part, with product numbers 9637385877 and 8203YQ, is essential for replacing damaged or worn dashboard components, ensuring that your vehicle maintains its aesthetic appeal and functionality.

Regular wear and tear can lead to issues with dashboard components. This panel helps to preserve the reliability and safety features of your vehicle’s dashboard.

Technical Information

• Manufacturer: PSA
• Model: Peugeot 206
• Product Codes: 9637385877, 8203YQ
• Additional Numbers: Not specified

Replacing the dashboard panel is generally a straightforward process, making it a great option for both professional mechanics and DIY enthusiasts. Ensure your vehicle remains in top condition with this high-quality replacement part.